...
PS MIO bank 500 signal connections to B2B JP1 connector., and PS MIO bank 501 signal connections to the microSD™ card J2:
Scroll Title |
---|
anchor | Table_SIP_MIOs |
---|
title | MIOs pins |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
MIO Pin | Connected to | B2B/SD | Notes |
---|
15 | UART_TX_ZYNQ | JP1-70 | 3.3V Voltage level. Also Connected to U36-2. To use this signal from B2B connector, "UART_OB_DISABLE" (JP1-11) must be "High". | 14 | UART_RX_ZYNQ | JP1-71 | 3.3V Voltage level. Also Connected to U36-3. To use this signal from B2B connector, "UART_OB_DISABLE" (JP1-11) must be "High". | 40 | SD_CLK | J2-5 | 3.3V Voltage level. Connected via U35 (SD/SDIO Multiplexer - Level Translator) | 41 | SD_CMD | J2-3 | 3.3V Voltage level. Connected via U35 (SD/SDIO Multiplexer - Level Translator) | 42 | SD_DAT0 | J2-7 | 3.3V Voltage level. Connected via U35 (SD/SDIO Multiplexer - Level Translator) | 43 | SD_DAT1 | J2-8 | 3.3V Voltage level. Connected via U35 (SD/SDIO Multiplexer - Level Translator) | 44 | SD_DAT2 | J2-1 | 3.3V Voltage level. Connected via U35 (SD/SDIO Multiplexer - Level Translator) | 45 | SD_DAT3 | J2-2 | 3.3V Voltage level. Connected via U35 (SD/SDIO Multiplexer - Level Translator) |
|
Test Points
Page properties |
---|
|
you must fill the table below with group of Test Point which are indicated as TP in a schematic. If there is no Test Point remarked in the schematic, delet the Test Point section. Example: Test Point | Signal | B2B | Notes |
---|
10 | PWR_PL_OK | J2-120 |
|
|
...