...
@Guillermo: Hier die JP11 Stecker Pins wo ETH rausgeführt wird
ADC Interface
@Guillermo: Hier die JP1 Stecker Pins wo ADC rausgeführt wird
PWM Interface
@Guillermo: Hier die JP2 Stecker Pins wo PWN rausgeführt wird
Micro USB -JTAG/UART
@Guillermo: Hier kurz erklären das UART JTAG über FTDI möglich ist und Hinweis das JTAG auch auf B2B J2 geht und nur einer JTAG bedienen darf
MIcro SD Socket
@Guillermo: Hier kurz ob direkt an PS angeschlossen oder Levelshifter oder ob die SD push pull oder push push ist
MIO Pins
...
The analog inputs of the ADCs are connected to B2B connector JP1.
| Scroll Title |
|---|
| anchor | Table_SIP_ADCs |
|---|
| title | ADCs pins connection |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
ADC Signal | B2B Connector | Notes |
|---|
ADC0_P
ADC0_N | JP1-106..107 | SAR ADC, U1.
3.3V Max. Voltage on any pin. | ADC1_P
ADC1_N | JP1-46..47 | SAR ADC, U3.
3.3V Max. Voltage on any pin. | ADC2_P
ADC2_N | JP1-109..110 | SAR ADC, U10.
3.3V Max. Voltage on any pin. | ADC3_P
ADC3_N | JP1-49..50 | SAR ADC, U15.
3.3V Max. Voltage on any pin. | ADC4_P
ADC4_N | JP1-112..113 | SAR ADC, U17.
3.3V Max. Voltage on any pin. | ADC5_P
ADC5_N | JP1-52..53 | SAR ADC, U2.
3.3V Max. Voltage on any pin. | ADC6_P
ADC6_N | JP1-115..116 | SAR ADC, U4.
3.3V Max. Voltage on any pin. | ADC7_P
ADC7_N | JP1-55..56 | SAR ADC, U11.
3.3V Max. Voltage on any pin. | ADC8_P
ADC8_N | JP1-118..119 | SAR ADC, U16.
3.3V Max. Voltage on any pin. | ADC9_P
ADC9_N | JP1-58..59 | SAR ADC, U19.
3.3V Max. Voltage on any pin. |
|
PWM Interface
@Guillermo: Hier die JP2 Stecker Pins wo PWN rausgeführt wird
Micro USB -JTAG/UART
@Guillermo: Hier kurz erklären das UART JTAG über FTDI möglich ist und Hinweis das JTAG auch auf B2B J2 geht und nur einer JTAG bedienen darf
Micro SD Socket
A microSD™ card connector (J2) is connected via U35 (SD/SDIO Multiplexer - Level Translator) to PS (Bank-501). It is a Push-On/Push-Off socket type, and work with a voltage level of 3.3V.
MIO Pins
| Page properties |
|---|
|
you must fill the table below with group of MIOs which are connected to a specific components or peripherals, you do not have to specify pins in B2B, Just mention which B2B is connected to MIOs. The rest is clear in the Schematic. Example: | MIO Pin | Connected to | B2B | Notes |
|---|
| MIO12...14 | SPI_CS , SPI_DQ0... SPI_DQ3 SPI_SCK | J2 | QSPI |
|
PS MIO bank 500 signal connections to B2B JP1 connector, and PS MIO bank banks 500/501 signal connections to the microSD™ card J2:interface.
| Scroll Title |
|---|
| anchor | Table_SIP_MIOs |
|---|
| title | MIOs pins |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
/SD| 15 | UART_TX_ZYNQ | JP1-70 | 3.3V Voltage level. Also Connected to U36-2. To use this signal from B2B connector, "UART_OB_DISABLE" (JP1-11) must be "High". | | 1..6 | SPI-CS , SPI-DQ0... SPI-DQ3 SPI-SCK | - | QSPI Flash, U7 | | 11..13 | LED1_R..G..B | - | LED D4 | | 14, 15 |
14 | UART_RX_ZYNQ, UART_TX_ZYNQ | JP1 |
-71 | 3.3V Voltage level. Also Connected to U36- |
3| 2. To use this signal from B2B connector, "UART_OB_DISABLE" (JP1-11) must be "High |
".| 40 | SD_CLK | J2-5 | 3.3V Voltage level. Connected via U35 (SD/SDIO Multiplexer - Level Translator) | | 41 | SD_CMD | J2-3 | 3.3V Voltage level. Connected via U35 (SD/SDIO Multiplexer - Level Translator) | | 42 | SD_DAT0 | J2-7 | 3.3V Voltage level. Connected via U35 (SD/SDIO Multiplexer - Level Translator) | | ". | | 16..27 | ETH-TXCK, ETH-TXD0..ETH-TXD3, ETH-TXCTL, ETH-RXCK, ETH-RXD0..ETH-RXD3, ETH-RXCTL | - | Gigabit ETH Transceiver, U8 | | 28..39 | OTG-DATA0..OTG-DATA7, OTG-DIR, OTG-STP, OTG-NXT, OTG-CLK | - | USB 2.0 ULPI transceiver, U18 | | 40..45 | PS_SD_CLK, PS_SD_CMD, PS_SD_DAT0..PS_SD_DAT3 | J2 |
43 | SD_DAT1 | J2-8 | 3.3V Voltage level. Connected to PS via U35 (SD/SDIO Multiplexer - Level Translator) |
| 44 | SD_DAT2 | J2-1 | 3.3V Voltage level. Connected via U35 (SD/SDIO Multiplexer - Level Translator) | | 46, 47 | I2C_SCL, I2C_SDA | - | General Purpose EEPROM, U21
MAC EEPROM, U24 | | 51 | PHY-RST | - | Gigabit ETH Transceiver, U8
USB 2.0 ULPI transceiver, U18 | | 52, 53 | ETH-MDC, ETH-MDIO | - | Gigabit ETH Transceiver, U8 |
45 | SD_DAT3 | J2-2 | 3.3V Voltage level. Connected via U35 (SD/SDIO Multiplexer - Level Translator)
|
Test Points
| Page properties |
|---|
|
you must fill the table below with group of Test Point which are indicated as TP in a schematic. If there is no Test Point remarked in the schematic, delet the Test Point section. Example: | Test Point | Signal | B2B | Notes |
|---|
| 10 | PWR_PL_OK | J2-120 |
|
|
...
| Scroll Title |
|---|
| anchor | Table_OBP_INADC |
|---|
| title | ADC Analog interface and pins |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Designator | Schematic | B2B JP1 pin | Notes |
|---|
| U1 | ADC0_P
ADC0_N | 106 - 107 | 3.3V Max Voltage on any pin. | | U2 | ADC5_P
ADC5_N | 52 - 53 | 3.3V Max Voltage on any pin. | | U3 | ADC1_P
ADC1_N | 46 - 47 | 3.3V Max Voltage on any pin. | | U4 | ADC6_P
ADC6_N | 115 - 116 | 3.3V Max Voltage on any pin. | | U10 | ADC2_P
ADC2_N | 109 - 110 | 3.3V Max Voltage on any pin. | | U11 | ADC7_P
ADC7_N | 55 - 56 | 3.3V Max Voltage on any pin. | | U15 | ADC3_P
ADC3_N | 49 - 50 | 3.3V Max Voltage on any pin. | | U16 | ADC8_P
ADC8_N | 118 - 119 | 3.3V Max Voltage on any pin. | | U17 | ADC4_P
ADC4_N | 112 - 113 | 3.3V Max Voltage on any pin. | | U19 | ADC9_P
ADC9_N | 58 - 59 | 3.3V Max Voltage on any pin. |
|
All the diigital signals are connected to PL Bank 34 as follows:
...