Page History

...

Note

It serves as a preview of the planned updates of the CPLD firmware and the change/expansion of the controller signals of the 4x5 4 x 5 modules.
This document will be continuously updated until all 4x5 4 x 5 modules have been revised.

Last change:

Page info

infoType	Modified date
dateFormat	yyyy-MM-dd
type	Flat

...

Impact: Depends custom carrier realisation. Mostly Mostly none.

Standardization:

Name	Module B2B Pin	Carrier B2B Pin	Direction	CPLD Pullup active	Changes
JTAGSEL	JM1-89	JB1-90	in	---	None
SC_EN1	JM1-28	JB1-27	in	yes	Depending on module activate weak Pullup
SC_NOSEQ	JM1-7	JB1-8	inout	yes	Depending on module from input or not used to inout. Depending on module activate weak Pullup on CPLD, in case it's connected to CPLD Used as Multifunction Pin, in case it's connected to CPLD
SC_PGOOD	JM1-30	JB1-29	inout	yes	Depending on module from output or not used to inout with weak pullup on module Activate weak Pullup on CPLD, in case it's connected to CPLD Used as additional Boot Mode Pin on Zynq Modules
SC_BOOTMODE	JM1-32	JB1-31	in	yes	Depending on module activate weak Pullup

...

Trenz Electronic Documentation

Versions Compared

Old Version 21

New Version 22

Key