Page History
...
| IP Core | Base address | Interrupt | Board Part Interface | Notes |
|---|---|---|---|---|
| MicroBlaze | Configured with low end Linux option | |||
| MIG | 0x8000_0000 | DDR3_SDRAM | Configured as per Module settings | |
| LMB_RAM | 0x0000_0000 | Size 32KByte, for FS-BOOT | ||
| MDM | n/a | Configured without JTAG UART | ||
| AXI_INTC | 0x4120_0000 | |||
| AXI_TIMER | 0x41C0_0000 | 0 | 32 bit mode Dual Channel Mode | |
| AXI_UARTLITE | 0x4060_0000 | 1 | BASE_UART0 | Configured with 115200 baud |
| AXI_QUAD_SPI | 0x44A0_0000 | 2 | QSPI_FLASH | Connected to on-board Flash, standard mode |
| AXI_GPIO | 0x4000_0000 | not used | SYS_GPIO |
Minimal Linux capable System Block Diagram.
It is possible to use same unmodified fs-boot.elf, u-boot-s.bin and image.ub as long as the hardware matches the requirements.
Overview
Content Tools