Page History
min_linux
This is a minimal MicroBlaze based system that can boot Linux and is fully ready for integration into Xilinx Petalinux. This design will be provided for all Modules that can support it (except ZYNQ based ones). Primary requirement is external memory (32MByte or more).
...
It is possible to use same unmodified fs-boot.elf, u-boot-s.bin and image.ub as long as the hardware matches the requirements.
umin_linux
This is based on min_linux further reducing the peripherals and functions, debug and GPIO are removed. This design does fit into any Xilinx 7 series FPGA including A15T.
| FPGA | Slice used % | FF % |
|---|---|---|
| A15T | 98% | |
| A35T | 49% | |
| A50T | ||
| A75T | ||
| A100T | ||
| A200T |
Overview
Content Tools