Page History

...

1. Apply Gap Filler in at least approx. 2 mm thickness to the following components:
   
   

   inc-drawio
   border true diagramName TE0813-0102-GapFillerGapfiller includedDiagram 1 simpleViewer true width 400 links auto tbstyle top pageId 195203434 diagramDisplayName lbox true diagramWidth 2074 revision 1

   
   
   
2. Carefully align the heatspreader and press it lightly.
   
   

   inc-drawio
   pageId border true 195203434 diagramDisplayName lbox true revision 1 diagramName TE0813-02mit33856 aspect GPr4BmzI2cbo72dIBcdC 1 includedDiagram 1 simpleViewer true width 600 aspectHash d687db1d7b78196e807408d5ab977cf59bfad969 links auto tbstyle top diagramWidth 1153

   
   
   

3. Set the torque screwdriver to 0.5Nm / 4.5 inlb.
   
   

4. Insert the Philips crosshead bit PH1.
   
   

5. Fasten the heatspreader crosswise from below with the four M3 × 6 mm pan-head screws.
   
   

   inc-drawio
   aspectHash border true pageId 195203434 diagramDisplayName lbox true diagramName TE0813TE813-02mit33856bottom aspect veWVOmRvpG8wNeCd_lW- 1 includedDiagram 1 simpleViewer true width 400 450ff7ae4051639d0e6ace82925d059592b56466 links auto tbstyle top diagramDisplayName lbox true diagramWidth 958 revision 1

...