Page History
| Children Display |
|---|
Overview
The Trenz Electronic TE0723 is an Arduino compatible FPGA module integrating a Xilinx Zynq-7010, 512 MByte DDR3L, and 16 MByte SPI Flash Memory for configuration and operation.
All parts are at least commercial temperature range of 0°C to +70°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.
| Note |
|---|
Only PCB Revision 01 is Open Source. |
| REV 1 | REV 2 | |
|---|---|---|
| DDR | LPDDR2 | DDR3L |
| DDR Size | 64MB | 512MB (128MB) |
| PMOD | no | yes |
Resources
Key Features
- Xilinx XC7Z010-1CLG225C
- Form Factor: Arduino Shield
- Dual ARM Cortex-A9
- 512 MByte DDR3L
- 16 MByte SPI Flash memory
- 12 MHz MEMS Oscillator low power consumption
- Hi-Speed USB2.0 ULPI Transceiver
- 23 FPGA I/O's available on board-to-board connectors
- MicroSD Card socket
- Micro USB OTG
- RGB LED (PL I/O connected)
- "Done" LED (inverted polarity)
- On-board USB JTAG and UART
- CERN Open Hardware Licence 1.2
PCB Revision 1
...
...
Overview
Content Tools