Page History
JTAG Access Vivado
Start Vivado or Vivado Labtools, and choose Hardware Manager.
...
| Note |
|---|
| If Linux has been booted it may happen that XADC monitor readback is disabled, in that case all the temperature and voltage readings would be invalid. |
JTAG Access SDK
Console/XMD
Launch Xilinx SDK prompt, then start XMD and connect to ARM DAP
...
Simplest way to check ARM JTAG Debug connection, in the screenshot memory content from address 0 is dumped in hex.
Console/XSDB
Launch Xilinx SDK prompt, then use xsdb commands
...
Overview
Content Tools