Page History

...

The same process takes place no matter what method is used to flash the SPI on Zynq.

program_flash

Usage:  program_flash   <FLASH OPTIONS>   <CABLE & DEVICE OPTIONS>

 [FLASH OPTIONS]:
    -f <image file>       : Image to be written onto the flash memory
    -offset <address>     : Offset within the flash memory at which the image should be written
    -no_erase             : Do not erase the flash memory before programming
    -erase_only           : Only erases the flash as per size of the image file
    -blank_check          : Check if the flash memory is erased
    -verify               : Check if the flash memory is programmed correctly
    -fsbl <fsbl file>     : For NAND & NOR flash types only (Zynq only)
    -erase_sector <size>  : For flashes whose erase sector is other than 64KB (size in bytes)
    -flash_type <type>    : Supported flash memory types
 For Zynq Devices

                                   1. qspi_single

                                   2. qspi_dual_parallel

                                   3. qspi_dual_stacked

                                   4. nand_8

                                   5. nand_16

                                   6. nor

                                For Non-Zynq Devices

                                   Please use the command line option -partlist to list all

                                     the flash types

    -partlist <bpi|spi> <micron|spansion> : List all the flash parts for Non-Zynq devices

                                List all flashes          - program_flash -partlist

                                List Micron BPI flashes   - program_flash -partlist bpi micron

                                List Spansion SPI flashes - program_flash -partlist spi spansion

 [CABLE & DEVICE OPTIONS]:

    -cable type xilinx_tcf esn <cable_esn> url <URL of the TCF agent>

    -debugdevice deviceNr <jtag chain no>

 EXAMPLE:

  1. Zynq (QSPI Single)

    program_flash -f BOOT.bin -flash_type qspi_single -blank_check -verify -cable type xilinx_tcf url tcp:localhost:3121

Flash Programming, Zynq UltraScale+

...