Page History
...
[FLASH OPTIONS]:
-f <image file> : Image to be written onto the flash memory
-offset <address> : Offset within the flash memory at which the image should be written
-no_erase : Do not erase the flash memory before programming
-erase_only : Only erases the flash as per size of the image file
-blank_check : Check if the flash memory is erased
-verify : Check if the flash memory is programmed correctly
-fsbl <fsbl file> : For NAND & NOR flash types only (Zynq only)
-erase_sector <size> : For flashes whose erase sector is other than 64KB (size in bytes)
-flash_type <type> : Supported flash memory types
For Zynq Devices
1. qspi_single
2. qspi_dual_parallel
For Non-Zynq Devices
Please use the command line option -partlist to list all the flash types
-partlist <bpi|spi> <micron|spansion> : List all the flash parts for Non-Zynq devices
List all flashes - program_flash -partlist
List Spansion SPI flashes - program_flash -partlist spi spansion
[CABLE & DEVICE OPTIONS]:
-cable type xilinx_tcf esn <cable_esn> url <URL of the TCF agent>
-debugdevice deviceNr <jtag chain no>
EXAMPLE:
1. Zynq (QSPI Single)
program_flash -f BOOT.bin -flash_type qspi_single -blank_check -verify -cable type xilinx_tcf url tcp:localhost:3121
Flash Programming, Zynq
...
Overview
Content Tools