Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

NameOptionsDescription (Default Configuration)
TE::help Display currently available functions. Important: Use only displayed functions and no functions from sub-namespaces 
Hardware Design
TE::hw_blockdesign_export_tcl[-no_mig_contents] [-mod_tcl] [-svntxt <arg>] [-help]Export Blockdesign to project folder <design_name>/block_design/ . Old *bd.tcl will be overwritten!
TE::hw_build_design[-help]Run Synthese, Implement, and generate Bitfile, optional MCSfile and some report files
Software Design
TE::sw_run_hsi[-run_only] [-prebuilt_hdf <arg>] [-no_bif] [-no_bin] [-clear] [-help]

Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -prebuild_hdf <arg> isn't set.

Copy the Hardware Defintition file to the working directory:<design_name>/workspace/hsi

Run HSI in <design_name>/workspace/hsi for all Programes listed in <design_name>/sw_lib/apps_list.csv

If HSI is finished, BIF-GEN and BIN-Gen are running for these Apps in the prepuilt folders <design_name>/prebuilt/...

TE::sw_run_sdk[-open_only] [-update_hdf_only] [-prebuilt_hdf <arg>] [-clear\] [-help]

Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -prebuild_hdf <arg> isn't set.

Copy the Hardware Defintition file to the working directory:<design_name>/workspace/sdk

Start SDK GUI in this workspace

Programming
TE::pr_init_hardware_manager[-help]Open Hardwaremanager, autoconnect Targed target device and initialise flash memory with configuration from *_board_files.csv.
TE::pr_program_jtag_bitfile[-used_board <arg>]

Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -used_board <arg> isn't set (Vivado only).

Programming Bitfile from <design_name>/prebuilt/hardware/<board_file_shortname> to the fpga device.

TE::pr_program_flash_binfile[-no_reboot] [-used_board <arg>] [-swapp <arg>][-available_apps] [-force_hw_manager] [-help]

Attention: For Zynq Systems only!

Program the Bootbin from <design_name>/prebuilt/boot_images/<board_file_shortname>/<app_name> to the fpga device.

Appname is selected with: -swapp <app_name>

After programming device reboot from memory will be done.

Default SDK Programmer is used, if not available LabTools Programmer is used.

TE::pr_program_flash_mcsfile[-no_reboot] [-used_board <arg>] [-help]

Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -used_board <arg> isn't set (Vivado only).

Initialise flash memory with configuration from *_board_files.csv

Programming  MCSfile from <design_name>/prebuilt/hardware/<board_file_shortname> to the Flash Device.

After programming device reboot from memory will be done.

Utilities
TE::util_zip_project[-save_all] [-remove_prebuilt] [-manual_filename <arg>] [-help]

Make a Backup from your Project in <design_name>/backup/

Zip-Program Variable must be set in start_settings.cmd. Currently only 7-Zip is supported.

...