Page History

Notes :

• short description of the design

• Short Link of "Scroll only" macro:

  • Use short link the Wiki Resource page, for example: http://trenz.org/te0720-info

  • List of available short links: https://wiki.trenz-electronic.de/display/TI/Redirects

Notes :

• Add basic key features, which can be tested with the design

• USB(JTAG/UART)
• LED

Notes :

• add every update file on the download
• add design changes on description

• add known Design issues and general notes for the current revision
• do not delete known issue, add fixed version time stamp if issue fixed

Notes :

• list of software which was used to generate the design

Notes :

• list of hardware which was used to generate the design
• mark the module and carrier board, which was used tested with an ^*

^*used as reference

^*used as reference

Notes :

• content of the zip file

Notes :

• prebuilt files
• Template Table:

  • 
    

    Scroll Title
    anchor Table_PF title-alignment center title Prebuilt files
    Scroll Table Layout orientation portrait sortDirection ASC repeatTableHeaders default style widths sortByColumn 1 sortEnabled false cellHighlighting true File File-Extension Description BIF-File *.bif File with description to generate Bin-File BIN-File *.bin Flash Configuration File with Boot-Image (Zynq-FPGAs) BIT-File *.bit FPGA (PL Part) Configuration File Boot Script-File *.scr Distro Boot Script file DebugProbes-File *.ltx Definition File for Vivado/Vivado Labtools Debugging Interface Debian SD-Image *.img Debian Image for SD-Card Diverse Reports --- Report files in different formats Device Tree *.dts Device tree (2 possible, one for u-boot and one for linux) Hardware-Platform-Description-File *.xsa Exported Vivado hardware description file for Vitis and PetaLinux LabTools Project-File *.lpr Vivado Labtools Project File MCS-File *.mcs Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only) MMI-File *.mmi File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only) OS-Image *.ub Image with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk) Software-Application-File *.elf Software Application for Zynq or MicroBlaze Processor Systems SREC-File *.srec Converted Software Application for MicroBlaze Processor Systems

    
    

• Important set new Vivado version link on every Design update of new vivado version!
• Set Link to download folder (Remove ../de/.. ../en/.. from url) for example: https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/TE0712/Reference_Design/2018.2/test_board

• Basic Design Steps

• Add/ Remove project specific description

Note:

• Description of Block Design, Constrains... BD Pictures from Export...

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;

entity blink is
	port (
		clk : in std_logic;
		rst : in std_logic;
		led : out std_logic
	);
end entity;

architecture rtl of blink is

	component CC_PLL is
	generic (
		REF_CLK         : string;  -- reference input in MHz
		OUT_CLK         : string;  -- pll output frequency in MHz
		PERF_MD         : string;  -- LOWPOWER, ECONOMY, SPEED
		LOW_JITTER      : integer; -- 0: disable, 1: enable low jitter mode
		CI_FILTER_CONST : integer; -- optional CI filter constant
		CP_FILTER_CONST : integer  -- optional CP filter constant
	);
	port (
		CLK_REF             : in  std_logic;
		USR_CLK_REF         : in  std_logic;
		CLK_FEEDBACK        : in  std_logic;
		USR_LOCKED_STDY_RST : in  std_logic;
		USR_PLL_LOCKED_STDY : out std_logic;
		USR_PLL_LOCKED      : out std_logic;
		CLK0                : out std_logic;
		CLK90               : out std_logic;
		CLK180              : out std_logic;
		CLK270              : out std_logic;
		CLK_REF_OUT         : out std_logic
	);
	end component;

	signal clk0    : std_logic;
	signal counter : unsigned(26 downto 0);

begin
	socket_pll : CC_PLL
	generic map (
		REF_CLK         => "10.0",
		OUT_CLK         => "100.0",
		PERF_MD         => "ECONOMY",
		LOW_JITTER      => 1,
		CI_FILTER_CONST => 2,
		CP_FILTER_CONST => 4
	)
	port map (
		CLK_REF             => clk,
		USR_CLK_REF         => '0',
		CLK_FEEDBACK        => '0',
		USR_LOCKED_STDY_RST => '0',
		USR_PLL_LOCKED_STDY => open,
		USR_PLL_LOCKED      => open,
		CLK0                => clk0,
		CLK90               => open,
		CLK180              => open,
		CLK270              => open,
		CLK_REF_OUT         => open
	);

	process(clk0)
	begin
		if rising_edge(clk0) then
			if rst = '0' then
				counter <= (others => '0');
			else
				counter <= counter + 1;
			end if;
		end if;
	end process;

	led <= counter(26);

end architecture;

## blink.ccf
#
# Date: 2022-10-21
#
# Format:
# <pin-direction> "<pin-name>" Loc = "<pin-location>" | <opt.-constraints>;
#
# Additional constraints can be appended using the pipe symbol.
# Files are read line by line. Text after the hash symbol is ignored.
#
# Available pin directions:
#
# Pin_in
#   defines an input pin
# Pin_out
#   defines an output pin
# Pin_inout
#   defines a bidirectional pin
#
# Available pin constraints:
#
# SCHMITT_TRIGGER={true,false}
#   enables or disables schmitt trigger (hysteresis) option
# PULLUP={true,false}
#   enables or disables I/O pullup resistor of nominal 50kOhm
# PULLDOWN={true,false}
#   enables or disables I/O pulldown resistor of nominal 50kOhm
# KEEPER={true,false}
#   enables or disables I/O keeper option
# SLEW={slow,fast}
#   sets slew rate to slow or fast
# DRIVE={3,6,9,12}
#   sets output drive strength to 3mA..12mA
# DELAY_OBF={0..15}
#   adds an additional delay of n * nominal 50ps to output signal
# DELAY_IBF={0..15}
#   adds an additional delay of n * nominal 50ps to input signal
# FF_IBF={true,false}
#   enables or disables placing of FF in input buffer, if possible
# FF_OBF={true,false}
#   enables or disables placing of FF in output buffer, if possible
# LVDS_BOOST={true,false}
#   enables increased LVDS output current of 6.4mA (default: 3.2mA)
# LVDS_TERM={true,false}
#   enables on-chip LVDS termination resistor of nominal 100Ohm, in output mode only
#
# Global IO constraints can be set with the default_GPIO statement. It can be
# overwritten by individual settings for specific GPIOs, e.g.:
#   default_GPIO | DRIVE=3; # sets all output strengths to 3mA, unless overwritten
#

Pin_in   "clk"  Loc = "IO_SB_A8" | SCHMITT_TRIGGER=true;
Pin_in   "rst"  Loc = "IO_EB_B0"; # SW3
Pin_out  "led"  Loc = "IO_SB_B4"; # D1

• Note this list must be only updated, if the document is online on public doc!
• It's semi automatically, so do following
  

  • Add new row below first

  • Copy "Page Information Macro (date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

  • Metadata is only used of compatibility of older exports