Page History

Settings for the other *.cmd files. Following Settings are avaliable:

• General Settings:
  • (optional) DO_NOT_CLOSE_SHELL: Shell do not closed after processing
  • (optional) ZIP_PATH: Set Path to installed Zip-Program. Currently 7-Zip are supported. IUsed for predefined TCL-function to Backup project.
  • (optional) ENABLE_SDSOC: Enable SDSOC Setting. Currently only for some reference project as beta version!
• Xilinx Setting:
  
  • XILDIR: Set Xilinx installation path (Default: c:\Xilinx).
  • VIVADO_VERSION: Current Vivado/LabTool/SDK Version (Example:2015.4). Don't change Vivado Version.
    • Xilinx Software will be searched in:

    • VIVADO (optional for project creation and programming): %XILDIR%\Vivado\%VIVADO_VERSION%\

    • SDK (optional for software projects and programming): %XILDIR%\SDK\%VIVADO_VERSION%\

    • LabTools (optional for programming only): %XILDIR%\Vivado_Lab\%VIVADO_VERSION%\

    • SDSOC (optional): %XILDIR%\SDSOC\%VIVADO_VERSION%\
• Board Setting:
  • PARTNUMBER: Set Board part number of the project which should be created
    • Available Numbers: (you can use ID,PRODID,BOARDNAME or SHORTNAME from TExxxx_board_file.csv list)
    • Used for project creation and programming
    • To create empty project without board part, used PARTNUMBER=-1 (use GUI to create your project. No block design tcl-file should be in /block_design)
    • Example TE0726 Module :
    • USE ID                 |USE PRODID                      |Use Boardname                                                |Use Shortname
      PARTNUMBER=1|PARTNUMBER=te0726-01 |PARTNUMBER=trenz.biz:te0726-01:part0:1.0 |PARTNUMBER=TE0726-01
• Programming Settings(program*file.cmd):
  
  • SWAPP: Select Software App, which should be configured.
    • Use the folder name of the <design_name>/prebuilt/boot_image/<partname>/* subfolder. The *bin,*.mcs or *.bit from this folder will be used.
    • If you will configure the raw *.bit or *.mcs  *.bin  from the <design_name>/prebuilt/hardware/<partname>/ folder, use @set SWAPP=NA or @set SWAPP="".
    • Example: SWAPP=hello_world   → used the file from prebuilt/boot_image/<partname>/hello_world
                      SWAPP=NA                → used the file from <design_name>/prebuilt/boot_image/<partname>/
  • PROGRAM_ROOT_FOLDER_FILE: If you want to program design file from the rootfolder <design_name>, set to 1

    • Attention: it should be only one *.bit, *.msc or *.bin file in the root folder.

Hardware Design

Create Project with setting from "start_settings.cmd" and source folders. Vivado GUI will be opened during the process.

(optional)  Create Project with setting from "startdesign_basic_settings.cmd" and source folders.. Build all Vivado hardware and software files if the sources are available.

Delete  Delete "<design_name>/v_log/", "<design_name>/vivado/", and "<design_name>/workspace/hsi/" directory with related documents before Projekt will created.

Hardware Design

Create Project with setting from "design_basic_settings.cmd" and source folders. Vivado GUI will be opened during the process.

Delete

"<design_name>

/vivado/", and "<design_name>/workspace/" directory with related documents before Projekt will

created.

(optional)  Create Project with setting from "startdesign_basic_settings.cmd" and source folders. Build all Vivado hardware and software files if the sources are available.

Delete  "<design_name>/vivado/", and "<design_name>/workspace/hsi/" directory with related documents before Projekt will created.

(optional)  Create or open an existing Vivado Lab Tools Project. (Additional TCL functions from Programming and Utilities Group are usable).

 Settings are done in "design_basic_settings.cmd".