Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Table of contents

Table of Contents

 

Release Description

Last supported Release

Type or FileVersion
Vivado Design Suite2015.4
Trenz Project Scripts2015.4.28
Trenz <board_series>_board_files.csv1.2
Trenz apps_list.csv

1.7

Trenz zip_ignore_list.csv1.0

...

Zip Project Delivery

Zip Name Description

DescriptionPCB Name Project Name+(opt. Variant) supported VIVADO Version Build Version and Date 
Example:TE0726-test_board_noprebuilt-vivado_2015.4-build_26_20160415133543-vivado_2015.4-build_26_20160415133543.zip

 

Last supported Release

Type or FileVersion
Vivado Design Suite2015.4
Trenz Project Scripts2015.4.28
Trenz <board_series>_board_files.csv1.2
Trenz apps_list.csv

1.7

Trenz zip_ignore_list.csv1.0.zip


Directory structure

File or DirectoryTypeDescription
<design_name>base directoryBase directory with predefined batch files (*.cmd) to generate or open VIVADO-Project
<design_name>/block_design/sourceScript to generate Block Design in Vivado (*_bd.tcl). (optional) Some board part designs used subfolder <board_file_shortname>  with Board Part specific Block Design (*_bd.tcl).
<design_name>/board_files/sourceLocal board part files repository and a list of available board part files  (<board_series>_board_files.csv)
<design_name>/constraints/sourceProject constrains (*.xdc). Some board part designs used subfolder <board_file_shortname>  with additional constrains (*.xdc)
<design_name>/doc/sourceDocumentation
<design_name>/ip_lib/sourceLocal Vivado IP repository
<design_name>/misc/source(Optional) Directory with additional sources
<design_name>/prebuilt/boot_images/prebuiltDirectory with prebuilt boot images (*.bin) and configuration files (*.bif)  for zynq and configured hardware files (*.bit and *.mcs) for micoblaze included in subfolders: default or <board_file_shortname>/<app_name>
<design_name>/prebuilt/hardware/prebuiltDirectory with prebuilt hardware sources (*.bit, *hdf, *.mcs) and reports included in subfolders: default or <board_file_shortname>
<design_name>/prebuilt/software/prebuilt(Optional) Directory with prebuilt software sources (*.elf) included in subfolders: default or <board_file_shortname>/<app_name>
<design_name>/prebuilt/os/prebuilt(Optional) Directory with predefined OS images included in subfolders  <os_name>/<board_file_shortname> or <os_name>/default
<design_name>/scripts/sourceTCL scripts to build a project
<design_name>/settings/source(Optional) Additional design settings: zip_ignore_list.csv, vivado project settings, SDSOC settings
<design_name>/software/source(Optional) Directory with additional software
<design_name>/sw_lib/source(Optional) Directory with local SDK/HSI software IP repository and a list of available software (apps_list.csv)
<design_name>/v_log/generatedTemporary directory with vivado log files (used only when vivado is started with predefined command files (*.cmd) from base folder otherwise this logs will be writen into the vivado working directory)
<design_name>/vivado/work, generatedWorking directory where Vivado project is created. Vivado project file is <design_name>.xpr
<design_name>/vivado_lab/work, generated(Optional) Working directory where Vivado LabTools is created. LabTools project file is <design_name>.lpr
<design_name>/workspace/hsiwork, generated(Optional) Directory where hsi project is created
<design_name>/workspace/sdkwork, generated(Optional) Directory where sdk project is created
<design_name>/sdsocwork, generated(Optional) Directory where SDSOC project is created
<design_name>/backup/generated(Optional) Directory for project backups

 

Windows Command Files

File NameDescription
Design + Settings
design_basic_settings.cmd

Settings for the other *.cmd files. Following Settings are avaliable:

  • General Settings:
    • (optional) DO_NOT_CLOSE_SHELL: Shell do not closed after processing
    • (optional) ZIP_PATH: Set Path to installed Zip-Program. Currently 7-Zip are supported. IUsed for predefined TCL-function to Backup project.
    • (optional) ENABLE_SDSOC: Enable SDSOC Setting. Currently only for some reference project as beta version!
  • Xilinx Setting:
    • XILDIR: Set Xilinx installation path (Default: c:\Xilinx).
    • VIVADO_VERSION: Current Vivado/LabTool/SDK Version (Example:2015.4). Don't change Vivado Version.
      • Xilinx Software will be searched in:
      • VIVADO (optional for project creation and programming): %XILDIR%\Vivado\%VIVADO_VERSION%\

      • SDK (optional for software projects and programming): %XILDIR%\SDK\%VIVADO_VERSION%\

      • LabTools (optional for programming only): %XILDIR%\Vivado_Lab\%VIVADO_VERSION%\

      • SDSOC (optional): %XILDIR%\SDSOC\%VIVADO_VERSION%\
  • Board Setting:
    • PARTNUMBER: Set Board part number of the project which should be created
      • Available Numbers: (you can use ID,PRODID,BOARDNAME or SHORTNAME from TExxxx_board_file.csv list)
      • Used for project creation and programming
      • To create empty project without board part, used PARTNUMBER=-1 (use GUI to create your project. No block design tcl-file should be in /block_design)
      • Example TE0726 Module :
      • USE ID                 |USE PRODID                      |Use Boardname                                                |Use Shortname
        PARTNUMBER=1|PARTNUMBER=te0726-01 |PARTNUMBER=trenz.biz:te0726-01:part0:1.0 |PARTNUMBER=TE0726-01
  • Programming Settings(program*file.cmd):
    • SWAPP: Select Software App, which should be configured.
      • Use the folder name of the <design_name>/prebuilt/boot_image/<partname>/* subfolder. The *bin,*.mcs or *.bit from this folder will be used.
      • If you will configure the raw *.bit or *.mcs  *.bin  from the <design_name>/prebuilt/hardware/<partname>/ folder, use @set SWAPP=NA or @set SWAPP="".
      • Example: SWAPP=hello_world   → used the file from prebuilt/boot_image/<partname>/hello_world
                        SWAPP=NA                → used the file from <design_name>/prebuilt/boot_image/<partname>/
    • PROGRAM_ROOT_FOLDER_FILE: If you want to program design file from the rootfolder <design_name>, set to 1
      • Attention: it should be only one *.bit, *.msc or *.bin file in the root folder.

design_clear_design_folders.cmd(optional)  Attention: Delete "<design_name>/v_log/", "<design_name>/vivado/", "<design_name>/vivado_lab/", "<design_name>/sdsoc/", and "<design_name>/workspace/" directory with related documents!
design_run_project_batchmode.cmd

(optional)  Create Project with setting from "design_basic_settings.cmd" and source folders. Build all Vivado hardware and software files if the sources are available.

Delete  "<design_name>/vivado/", and "<design_name>/workspace/hsi/" directory with related documents before Projekt will created.

Hardware Design

vivado_create_project_guimode.cmd

Create Project with setting from "design_basic_settings.cmd" and source folders. Vivado GUI will be opened during the process.

Delete "<design_name>/vivado/", and "<design_name>/workspace/" directory with related documents before Projekt will created.

vivado_create_project_batchmode.cmd

(optional)  Create Project with setting from "design_basic_settings.cmd" and source folders.

Delete  "<design_name>/vivado/", and "<design_name>/workspace/" directory with related documents before Projekt will created.

vivado_open_existing_project_guimode.cmdOpens an existing Project "<design_name>/vivado/<design_name>.xpr" and restore Script-Variables.
Software Design
sdk_create_prebuilt_project_guimode.cmd(optional) Create SDK project with hardware definition file from prebuild folder. It used the *.hdf from: <design_name>/prebuilt/hardware/<board_file_shortname>/. Set <board_file_shortname> and <app_name> in "design_basic_settings.cmd".
Programming
program_flash_binfile.cmd(optional) For Zynq Systems only. Programming Flash Memory via JTAG with specified Boot.bin. Used SDK Programmer (Same as SDK  "Program Flash") or LabTools Programmer (Vivado or LabTools only), depends on installion settings. Default, it used the boot.bin from: <design_name>/prebuilt/boot_images/<board_file_shortname>/<app_name>. Settings are done in "design_basic_settings.cmd".
program_flash_mcsfile.cmd(optional) For Non-Zynq Systems only. Programming Flash Memory via JTAG with specified <design_name>.mcs. Used LabTools Programmer (Vivado or LabTools only), depends on installion settings. Default, it used the <design_name>.mcs from: <design_name>/prebuilt/hardware/<board_file_shortname>. Settings are done in "design_basic_settings.cmd".
program_fpga_bitfile.cmd(optional)  Programming FPGA via JTAG with specified <design_name>.bit. Used LabTools Programmer (Vivado or LabTools only), depends on installion settings. Default, it used the <design_name>.bit from: <design_name>/prebuilt/hardware/<board_file_shortname>. Settings are done in "design_basic_settings.cmd".
labtools_open_project_guimode.cmd

(optional)  Create or open an existing Vivado Lab Tools Project. (Additional TCL functions from Programming and Utilities Group are usable). Settings are done in "design_basic_settings.cmd".

...

TE-TCL-Extentsions

NameOptionsDescription (Default Configuration)
TE::help Display currently available functions. Important: Use only displayed functions and no functions from sub-namespaces 
Hardware Design
TE::hw_blockdesign_export_tcl[-no_mig_contents] [-no_validate] [-mod_tcl] [-svntxt <arg>]  [-board_part_only] [-help]Export Blockdesign to project folder <design_name>/block_design/ . Old *bd.tcl will be overwritten!
TE::hw_build_design[-export_prebuilt] [-export_prebuilt_only] [-help]Run Synthese, Implement, and generate Bitfile, optional MCSfile and some report files
Software Design
TE::sw_run_hsi[-run_only] [-prebuilt_hdf <arg>] [-no_hsi] [-no_bif] [-no_bin] [-no_bitmcs] [-clear] [-help]

Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -prebuild_hdf <arg> isn't set.
Copy the Hardware Defintition file to the working directory:<design_name>/workspace/hsi
Run HSI in <design_name>/workspace/hsi for all Programes listed in <design_name>/sw_lib/apps_list.csv
If HSI is finished, BIF-GEN and BIN-Gen are running for these Apps in the prepuilt folders <design_name>/prebuilt/...
You can deactivate different steps with following args :

  • -no_hsi  : *.elf filesgeneration is disabled
  • -no_bif   : *.bif files generation is disabled
  • -no_bin  : *.bin files generation is disabled
  • -no_bitmcs: *.bit and *.mcs file (with software design) is disabled
TE::sw_run_sdk[-open_only] [-update_hdf_only] [-prebuilt_hdf <arg>] [-clear] [-help]

Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -prebuild_hdf <arg> isn't set.
Copy the Hardware Defintition file to the working directory:<design_name>/workspace/sdk
Start SDK GUI in this workspace

Programming
TE::pr_init_hardware_manager[-help]Open Hardwaremanager, autoconnect target device and initialise flash memory with configuration from *_board_files.csv.
TE::pr_program_jtag_bitfile[-used_board <arg>] [-swapp <arg>] [-available_apps] [-used_basefolder_bitfile] [-help]

Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -used_board <arg> isn't set (Vivado only).
Programming Bitfile from <design_name>/prebuilt/hardware/<board_file_shortname> to the fpga device.
If "-used_basefolder_bitfile" is set, the Bitfile (*.bit)  from the base folder (<design_name>) is used instead of the prebuilts. Attention: Take only one Bitfile in the basefolder!

(MicroBlaze only) If "-swapp" is set, the Bitfile with *.elf configuration is used from <design_name>/prebuilt/boot_images/<board_file_shortname>/<app_name>

TE::pr_program_flash_binfile[-no_reboot] [-used_board <arg>] [-swapp <arg>] [-available_apps] [-force_hw_manager] [-used_basefolder_binfile] [-help]

Attention: For Zynq Systems only!
Program the Bootbin from <design_name>/prebuilt/boot_images/<board_file_shortname>/<app_name> to the fpga device.
Appname is selected with: -swapp <app_name>
After programming device reboot from memory will be done.
Default SDK Programmer is used, if not available LabTools Programmer is used.
If "-used_basefolder_binfile" is set, the Binfile (*.bin)  from the base folder (<design_name>) is used instead of the prebuilts. Attention: Take only one Binfile in the basefolder!

TE::pr_program_flash_mcsfile[-no_reboot] [-used_board <arg>] [-swapp <arg>] [-available_apps] [-used_basefolder_mcsfile] [-help]

Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -used_board <arg> isn't set (Vivado only).
Initialise flash memory with configuration from *_board_files.csv
Programming  MCSfile from <design_name>/prebuilt/hardware/<board_file_shortname> to the Flash Device.
After programming device reboot from memory will be done.
If "-used_basefolder_binfile" is set, the MCSfile (*.mcs)  from the base folder (<design_name>) is used instead of  the prebuilts. Attention: Take only one MCSfile in the basefolder!

(MicroBlaze only) If "-swapp" is set, the MCSfile with *.elf configuration is used from <design_name>/prebuilt/boot_images/<board_file_shortname>/<app_name>

Utilities
TE::util_zip_project[-save_all] [-remove_prebuilt] [-manual_filename <arg>] [-help]

Make a Backup from your Project in <design_name>/backup/

Zip-Program Variable must be set in start_settings.cmd. Currently only 7-Zip is supported.

Beta Test
TE::beta_util_sdsoc_project[-check_only] [-start_sdsoc_only] [-help]Create SDSO Workspace. Currently only on some Reference Designs available. Run [-check_only] to check SDSOC ready state.

Usage

...

Design Environment: Usage

Reference-Design: Getting Started

 

Basic Design Settings

Project Configuration

  1. Unzip project files
  2. Rename basefolder (basefolder name is used as project name)
  3. Edit design_basic_settings.cmd
    1. Select the correct Xilinx Program path (See: Windows Command Files → design_basic_settings.cmd)
    2. Select the correct board part number for your PCB  (See: Windows Command Files → design_basic_settings.cmd)
    3. Other settings are optional  (See: Windows Command Filesdesign_basic_settings.cmd)
  4. Excecute vivado_create_project_guimode.cmd or vivado_create_project_batchmode.cmd to generate a vivado project with the predefined Block Design from the Block Design folder
  5. Open Vivado with vivado_open_existing_project_guimode.cmd (if you use vivado_create_project_guimode.cmd on step 4, you didn't need this)
  6. Open the Block Design and create your own design inside this Block Design.
  7. Backup your Block Design as tcl-script: Type "TE::hw_blockdesign_export_tcl" on Vivado Tcl Console. The old one will be overwritten.
  8. Build your Design... 

...

Initialise TE-scripts on

...

Vivado/

...

LabTools

  • Variant 1 (recommended):
    • Start the project with the predefined command file (vivado_open_existing_project_guimode.cmd.cmd) respectively LabTools with (labtools_open_project_guimode.cmd)
  • Variant 2:
    • Create your own Initialisation Button on the Vivado GUI:
      • Tools → Customize Commands → Customize Commands...
      • Push (plus)
      • Type Name ex.: Init Scripts
      • Press Enter
      • Select Run command and insert:
        • for Vivado: cd [get_property DIRECTORY [current_project]]; source -notrace "../scripts/reinitialise_all.tcl"
        • for LabTool: cd [pwd]; source -notrace "../scripts/reinitialise_all.tcl"
      • Press Enter
      • A new Button is shown on the Vivado Gui: All Scripts are reinitialised, if you press this Button.
  • Variant 3:
    • Reinitialise Script on Vivado TCL-Console:
      • Type: source ../scripts/reinitialise_all.tcl

Use predefined TE-Script functions

  • Variant 1 (recommended):
    • Typ function on Vivado TCL Console, ex.: TE::help
    • TE::help
      • Show all predefined TE-Script functions.
    • TE:<functionname> -help 
      • Show short description of this function.
      • Attention: If -help argument is set, all other args will be ignored. 
  • Variant 2:
    • Create your own function Button on the Vivado GUI:
      • Tools → Customize Commands → Customize Commands...
      • Push +
      • Type Name ex.: Run SDK
      • Press Enter
      • Select Run command and insert function:
        • Variante 1 (no Vivado request window for args):
          • insert function and used args, ex.: TE::sw_program_zynq -swapp hello_world
        • Variant 2 (Vivado request window for args):
          • insert function, ex.:TE::sw_program_zynq
          • Press Define Args...
          • For every arg:
            • Push (plus)
            • Typ Name, Comment, Default Value and set optional
            • Press Enter
            • Example for args:
              • Push (plus)
              • Index, Key Name, -swapp, (tick)
              • Push (plus)
              • Appname, Arg, hello_world, (tick)
               
      • Press Enter
      • A new Button is shown on the Vivado Gui.

...