Versions Compared

Old Version 78

changes.mady.by.user John Hartfiel

Saved on

compared with

New Version 79

changes.mady.by.user John Hartfiel

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Type or FileVersion
Vivado Design Suite2015.4
Trenz Project Scripts2015.4.2832
Trenz <board_series>_board_files.csv1.2
Trenz apps_list.csv

1.7

Trenz zip_ignore_list.csv1.0

...

NameOptionsDescription (Default Configuration)
TE::help Display currently available functions. Important: Use only displayed functions and no functions from sub-namespaces 
Hardware Design
TE::hw_blockdesign_export_tcl[-no_mig_contents] [-no_validate] [-mod_tcl] [-svntxt <arg>]  [-board_part_only] [-help]Export Blockdesign to project folder <design_name>/block_design/ . Old *bd.tcl will be overwritten!
TE::hw_build_design[-export_prebuilt] [-export_prebuilt_only] [-help]Run Synthese, Implement, and generate Bitfile, optional MCSfile and some report files
Software Design
TE::sw_run_hsi[-run_only] [-prebuilt_hdf <arg>] [-no_hsi] [-no_bif] [-no_bin] [-no_bitmcs] [-clear] [-help]

Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -prebuild_hdf <arg> isn't set.
Copy the Hardware Defintition file to the working directory:<design_name>/workspace/hsi
Run HSI in <design_name>/workspace/hsi for all Programes listed in <design_name>/sw_lib/apps_list.csv
If HSI is finished, BIF-GEN and BIN-Gen are running for these Apps in the prepuilt folders <design_name>/prebuilt/...
You can deactivate different steps with following args :

  • -no_hsi  : *.elf filesgeneration is disabled
  • -no_bif   : *.bif files generation is disabled
  • -no_bin  : *.bin files generation is disabled
  • -no_bitmcs: *.bit and *.mcs file (with software design) is disabled
TE::sw_run_sdk[-open_only] [-update_hdf_only] [-prebuilt_hdf <arg>] [-clear] [-help]

Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -prebuild_hdf <arg> isn't set.
Copy the Hardware Defintition file to the working directory:<design_name>/workspace/sdk
Start SDK GUI in this workspace

Programming
TE::pr_init_hardware_manager[-help]Open Hardwaremanager, autoconnect target device and initialise flash memory with configuration from *_board_files.csv.
TE::pr_program_jtag_bitfile[-used_board <arg>] [-swapp <arg>] [-available_apps] [-used_basefolder_bitfile] [-help]

Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -used_board <arg> isn't set (Vivado only).
Programming Bitfile from <design_name>/prebuilt/hardware/<board_file_shortname> to the fpga device.
If "-used_basefolder_bitfile" is set, the Bitfile (*.bit)  from the base folder (<design_name>) is used instead of the prebuilts. Attention: Take only one Bitfile in the basefolder!

(MicroBlaze only) If "-swapp" is set, the Bitfile with *.elf configuration is used from <design_name>/prebuilt/boot_images/<board_file_shortname>/<app_name>

TE::pr_program_flash_binfile[-no_reboot] [-used_board <arg>] [-swapp <arg>] [-available_apps] [-force_hw_manager] [-used_basefolder_binfile] [-help]

Attention: For Zynq Systems only!
Program the Bootbin from <design_name>/prebuilt/boot_images/<board_file_shortname>/<app_name> to the fpga device.
Appname is selected with: -swapp <app_name>
After programming device reboot from memory will be done.
Default SDK Programmer is used, if not available LabTools Programmer is used.
If "-used_basefolder_binfile" is set, the Binfile (*.bin)  from the base folder (<design_name>) is used instead of the prebuilts. Attention: Take only one Binfile in the basefolder!

TE::pr_program_flash_mcsfile[-no_reboot] [-used_board <arg>] [-swapp <arg>] [-available_apps] [-used_basefolder_mcsfile] [-help]

Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -used_board <arg> isn't set (Vivado only).
Initialise flash memory with configuration from *_board_files.csv
Programming  MCSfile from <design_name>/prebuilt/hardware/<board_file_shortname> to the Flash Device.
After programming device reboot from memory will be done.
If "-used_basefolder_binfile" is set, the MCSfile (*.mcs)  from the base folder (<design_name>) is used instead of  the prebuilts. Attention: Take only one MCSfile in the basefolder!

(MicroBlaze only) If "-swapp" is set, the MCSfile with *.elf configuration is used from <design_name>/prebuilt/boot_images/<board_file_shortname>/<app_name>

Utilities
TE::util_zip_project[-save_all] [-remove_prebuilt] [-manual_filename <arg>] [-help]

Make a Backup from your Project in <design_name>/backup/

Zip-Program Variable must be set in start_settings.cmd. Currently only 7-Zip is supported.

Beta Test
TE::ADV::beta_util_sdsoc_project[-check_only] [-start_sdsoc_only] [-help]

Create SDSOC-Workspace. Currently only on some Reference-Designs available. Run [-check_only] to check SDSOC ready state.

...