Page History
Compatibility
TE0706 is mainly for the use with TE0720 or TE0715 modules. It is possible to use with other 4x5 modules as well, but the usable functionality may be less.
Function | TE0715 | TE0720 | |||
---|---|---|---|---|---|
J3: RJ45 | PS ETH0 | PS ETH0 | |||
J2: RJ45 | PL ETH | PL ETH | |||
J4; MicroSD | PS SDIO0 | PS SDIO0 | |||
J7: USB | PS USB0 | PS USB0 | |||
GTP/GTX | n/a | not used |
TE0706 with TE0715-30
TE0715-30 uses Kintex based SoC and has only one 3.3V tolerant bank. Note: TE0706-01 schematic uses net names from TE0720, they are do not have relation to net names and banks if TE0715 is used.
TE0715-30 | VCCIO max | Connector B2B | VG96 Pin | Notes |
---|---|---|---|---|
B13 | 3.3 | JB1.10 JB.12 | B32 | Can solder R20 to use 3.3V in TE0715 bank B13 |
B34 | 1.8V | JB2.6 | - | Must be connected with fly wire on TE0706, not accessible on the connector |
B35 | 1.8V | JB2.8 /JB2.10 | B1 | Must connect 1.8V max either wire or from VG96 connector |
With standard delivery of the TE0706, TE0715 would have all 3 FPGA I/O Banks not powered.
Power Supply
DIP Switches
# | Schematic name | Default | |
---|---|---|---|
1 | - | N/A | |
2 | PROGMODE | ON | Keep ON for Module JTAG normal operation |
3 | MODE | USER | Connected to Module MODE pin, select boot mode |
4 | EN1 | OFF |
Mechanical
Size: 65 x 100 mm
Include Page | IN:Include Legal Notices | IN:Include Legal Notices
---|
Children Display |
Overview
Content Tools