Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • 1 x Gbps Ethernet Phy transceiver
  • 2 x 100 Mbps Ethernet PHY transceivers
  • 512 MByte DDR3 SDRAMMemory
  • 32 MByte SPI Flash - Memory4 Gbyte e-NAND-Flash-Memory
  • eMMC (4GByte in standard configuration)
  •  USB PHY transceiver
  • powerful switch-mode power supplies for all on-board voltages
  • large number of configurable I/Os is provided via rugged high-speed stacking strips

All modules in 4 x 5 cm form factor are mechanically compatible.

Block diagram

Board Components

...

Key Features

  • Industrial-grade Xilinx Zynq-7000 (XC7Z020) SoM
  • Rugged for shock and high vibration
  • 2 x ARM Cortex-A9
  • 1 x 10/100/1000 Mbps Ethernet transceiver PHY
  • 2 x 10/100 Mbps Ethernet transceiver PHYs
  • 3 x MAC-Address EEPROMs
  • 16-Bit wide 512 MByte DDR3 SDRAM
  • 32 MByte QSPI-Flash-Memory
  • 4 GByte e-NAND-Flash-Memory (embedded eMMC Memory)
  • USB 2.0 high-speed ULPI transceiver
  • Plug-on module with 2 x 120-pin high-speed hermaphroditic strips
  • 136 FPGA I/Os (58 LVDS pairs possible) and 6 PS MIOs available on board-to-board connectors
  • On-board high-efficiency DC-DC converters
    • 4.0 A x 1.0 V power rail
    • 1.5 A x 1.5 V power rail
    • 1.5 A x 1.8 V power rail
    • 1.5 A x 2.5 V power rail
  • System management
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • Temperature compensated RTC (real-time clock)
  • User LED
  • Evenly-spread supply pins for good signal integrity

...