Page History
Table of Contents
| Table of Contents |
|---|
Overview
The Trenz Electronic TE0729 is an industrial-grade SoM (System on Module) based on Xilinx Zynq-7000 SoC (XC7Z020).
...
| Note |
|---|
LED D2 is connected to the FPGA Done pin and will go off as soon as PL is configured. This LED will not operate if the System Controller can not power on the 3.3V output rail that also powers the 3.3V circuitry on the module. |
...
Ethernet
The TE0729 is equipped with a Marvell Alaska 88E1512 Gigabit Ethernet PHY (U3). The Ethernet PHY RGMII Interface is connected to the Zynq Ethernet0 PS GEM0. The I/O Voltage is fixed at 1.8V for HSTL signaling.
...
| Storage device name | Content | Notes |
|---|---|---|
24AA025E48 EEPROMs | User content not programmed | Valid MAC Address from manufacturer |
| e-MMC memoryFlash-Memory | Empty, not programmed | Except serial number programmed by flash vendor |
SPI Flash OTP Area | Empty, not programmed | Except serial number programmed by flash vendor |
SPI Flash Quad Enable bit | Programmed | |
SPI Flash main array | demo design | |
EFUSE USER | Not programmed | |
EFUSE Security | Not programmed | |
Hardware Revision History
| Revision | Changes | ||
|---|---|---|---|
01 | Prototypes | ||
| 02 | Prototypes | 03 | First production release |
Technical Specification
...
Module size: 50 mm × 40 mm. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: 8mm
PCB thickness: 1.6mm
Highest part on PCB: approx. 2.5mm5?? mm. Please download the step model for exact numbers.
...
Overview
Content Tools