Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

TE0720 4 x 5 cm SoC module with Xilinx Zynq-7020

TE0720 - GigaZee This Trenz Electronic Starter Kit consists of a TE0808 module on a TEBF0808 base board in Mini-ITX Enclosure. See shop link for detailed content.

...

  • application notes and more

      4 x 5 Module Integration Guide - module and carrier board power connection tables

      B2B Pinout Table - cross reference of 4 x 5 cm modules with different baseboards

      4 x 5 cm LSHM Board-to-Board Connectors - overview, compatibility, mating heights and speed rating

      TE0703 baseboard

      CAD Data and Downloads for baseboards - Altium projects, gerbers and step models

      Downloads

      ...

      Package Content

      • 1 x TE0720-03-1CF Micromodule

      • 1 x TE0703 Baseboard

      • 1 x Heatsink

      • 2 x VG96 Connector (DIN 41612)

      • 1 x Power supply 5 V

      • 1 x Mini USB cable

      • 1 x Micro SD card 8 MB

      ...

      Xilinx Software and Driver


      Additional Documentation

      Table of Contents

      Important Notes

      Warning
      Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters the one marked with green dot must be closer to the SoM


      Note

      ES devices are not included in all Vivado versions, for ES1 only:

      activate beta device see: FAQ - How can I activate beta devices?


      Note

      For all Starter Kit's shipped before 2017-06-21:

      Enclosure Power and HD LED was swapped on connector. See "Enclosure Power Button, Reset Button, HDD LED and Power LED"  section for correct connection.

      Getting Started

      Starter Kit Basic

      Main Power Enclosure Location

      Image Added

      Power Button , Reset Button, HDD LED and Power LED Enclosure  Location

      Image Added


      Warning
       Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters the one marked with green dot must be closer to the SoM


      TEBF0808

      TE0790-02

      (with green dot)

      TE0790-02L


      DIP-SchalterS4
      S4.1OFF
      S4.2OFF
      S4.3OFF
      S4.4ON



      DIP-SchalterS5
      S5.1ON
      S5.2ON
      S5.3OFF
      S5.4OFF



       DIP-SchalterS1
      S1.1ON
      S1.2OFF
      S1.3OFF
      S1.4OFF



       DIP-SchalterS1
      S1.1ON
      S1.2OFF
      S1.3OFF
      S1.4OFF


      SI5345 NVM on the module is not programmed on factory, so modified FSBL is needed to get running output CLKS.

      It is possible to program NVM of the SI5345 2 times, see Si5345

      Starter Kit will be shipped with all cable connected.

      ATX Power

      Image Added

      Module

      Image Added

      FMC FAN

      Image Added

      XMODs

      Image Added

      Enclosure USB

      Image Added

      Enclosure FAN1 and HDAUDIO

      Image AddedImage Added

      Enclosure Power Button , Reset Button, HDD LED and Power LED

      Image AddedImage Added

      Support