Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

There are two baseboard supply voltages VIOTA and VIOTB connected to the 4 x 5 SoM's PL IO-bank. The supply-voltages have following pin assignments on B2B-connectors:

...

Table 4: Baseboard supply-voltages VIOTA and VIOTB

...

DateRevisionAuthorsDescription

Page info
modified-date
modified-date
dateFormatyyyy-MM-dd

Ali Naseri
  • updated Power-on sequence diagram
2018-01-12
v.62
John Hartfiel
  • Dual PMOD note
2017-11-09v.60John Hartfiel
  • add B2B connector section
2017-08-15

v.59

John Hartfiel
  • Add VCCIO Jumper Pin location.
  • Updated VADJ description.
2017-08-14v.58John Hartfiel
  • Description correction.
2017-05-25v.56Jan Kumann
  • New physical dimensions drawing of the board.
2017-05-16

v.51

Jan Kumann
  • A few overall improvements and corrections, new  block diagram.
2017-04-11


Ali Naseri
  • added block diagram
2017-02-15

v.45

Ali Naseri
  • added warning concerning the use of FTDI tools
2017-02-15v.40Ali Naseri
  • added power-on sequence diagram
2017-01-19

v.35

Ali Naseri
  • correction of table 3 (switch-positions to adjust FMC_VADJ)
  • inserted hint to set and measure the PL IO-bank supply-voltages
2017-01-13

v.20

Ali Naseri
  • added section for baseboard supply voltage configuration
2016-11-29
v.10


Ali Naseri
  • TRM update due to new revision 06 of
  • the carrier board.
2016-11-28v.4

Ali Naseri

  • TRM adjustment to the newest
  • revision (05) of TE0701 Carrier Board.
2014-02-18
0.2
Sven-Ole Voigt
  • TE0701-03 (REV3) updated
2014-01-05

0.1

Sven-Ole Voigt
  • Initial release

AllSven-Ole Voigt, Ali Naseri

...