Page History
| Scroll Ignore |
|---|
Download PDF Version of this document. |
| Scroll pdf ignore | |
|---|---|
Table of Contents
|
Overview
| Scroll Only (inline) |
|---|
Refer to https://shop.trenz-electronic.de/en/Download/?path=Trenz_Electronic/carrier_boards/TE0701 for downloadable version of this manual and additional technical documentation of the product.
|
The Trenz Electronic TE0701 Carrier Board is a baseboard for 4 x 5 SoMs, which exposes the module's B2B connector pins to accessible connectors and provides a whole range of on-board components to test and evaluate TE 4 x 5 SoMs.
See page "4 x 5 cm carriers" to get information about the SoMs supported by the TE0701 carrier board.
| Scroll Only (inline) |
|---|
Refer to http://trenz.org/te0701-info for the current online version of this manual and other available documentation. |
Block Diagram
Figure 1: TE0701-06 block diagram.
...
There are two baseboard supply voltages VIOTA and VIOTB connected to the 4 x 5 SoM's PL IO-bank. The supply-voltages have following pin assignments on B2B-connectors:
...
Table 4: Baseboard supply-voltages VIOTA and VIOTB
...
Overview
Content Tools