Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

NameDirectionPinDescription
ACBUS4                96FTDI / currently_not_used
ACBUS5                88FTDI / currently_not_used
ADBUS4               out98constant 0 / currently_not_used
ADBUS7               in97/ currently_not_used
BDBUS0               in87UART TX from FTDI
BDBUS1               out86UART RX to FTDI
C_TCKout81JTAG FTDI
C_TDIout84JTAG FTDI
C_TDOin83JTAG FTDI
C_TMSout85JTAG FTDI
CM0                  in99DIP Switch S3-M1
CM1                  in1DIP Switch S3-M2
EN_FMC               out31VADJ and 3V3V_FMC Power on
EN1                  out24Power Enable Pin for Module CPLD
FMC_PRSNT            in28FMC Card present pin (zero if not present)
FMC_SCL              out10FMC I2C
FMC_SDAinout8FMC I2C
FMC_TCK               4JTAG FMC / currently_not_used
FMC_TDI               12JTAG FMC / currently_not_used
FMC_TDO               9JTAG FMC / currently_not_used
FMC_TMS               7JTAG FMC / currently_not_used
HDMI_SCL             inout47HDMI
HDMI_SDA             inout45HDMI
HDMI_SPDIF            15HDMI / currently_not_used
HDMI_SPDIFOUT         14HDMI / currently_not_used
JTAGEN               --82

Enable JTAG access to carrier CPLD for Firmware update (zero: JTAG routed to module, one: CPLD access)

Set DIP Switch S3-JTAGEN to ON, for module access.

M_TCK                in91JTAG Module
M_TDI                in94JTAG Module
M_TDO                out95JTAG Module
M_TMS                in90JTAG Module
MIO10                inout29MIO
MIO11                inout19MIO
MIO12                inout36MIO
MIO13                inout30MIO
MIO14                inout37 MIO / Module UART0.RX << BDBUS0
MIO15                in18 MIO / Module UART0.TX >> BDBUS1
MODE                 out27Boot Mode for Zynq Devices (Flash or SD)
NOSEQ                inout21 
PG_C2M               out20 
PGOOD                inout25 
PHY_LED1             out42 
PHY_LED2             out43 
POK_FMC              in32FMC Power good from FMC VADJ DCDC
PX6                  inout49 
PX7                  inout48 
RESIN                out13 
S1                   in3User Pushbutton
S2                   in2User Pushbutton / global Reset
SD_DETECT            in40SD Detection
SD_WP                in41SD
SEL_SD               out39SD Selection, MMC SD Slot or PMOD J2
ULED1                out78LED D1
ULED2                out77LED D2
ULED3                out76LED D3
ULED4                out16LED D4
ULED5                out69LED D5, powered by FMC VADJ
ULED6                out68LED D6, powered by FMC VADJ
ULED7                out65LED D7, powered by FMC VADJ
ULED8                out64LED D8, powered by FMC VADJ
USB_OC               in17USB Over Current
VID0                 out34VADJ Voltage selection (EN5335QI)
VID1                 out35VADJ Voltage selection (EN5335QI)
VID2                 out38VADJ Voltage selection (EN5335QI)
X6                   in60 Module IO
Y0                   in75I2C SCL
Y1                   out66I2C SDA_OUT
Y2                   in67RGPIO CLK
Y3                   out70RGPIO TX
Y4                   in74RGPIO RX
Y5                   in71I2C SDA_IN
Y6                   in63 Module IO

 

Functional Description

JTAG

...