Page History
...
Xilinx Artix-7 XC7A35T (A15 to A100T)
commercial temperature grade (industrial on request)
32 MByte Flash memory
2 x 50 pin headers with 2,54mm pitch, ideal for breadboard use
- 87 IO's (42 + 42 + 3)
- 100 MHz System Clock
- I2C EEPROM
3.3V single supply with on board voltage regulators
Size 73 x 35 mm
JTAG/Uart connector
2 LEDs
- optional HyperRAM (8 to 32 MByte)
- optional POF Fiber Optical Adapter (125, 250 or 1000MBit/s)
 |  |  |
IO Banks
| Bank | VCCIO | B2B I/O | Notes |
|---|---|---|---|
| 0 | 3.3V | 0 | JTAG |
| 14 | 3.3V | 0 (3) | 3 I/O in XMOD-JTAG - for use as UART |
| 15 | 1.8V | 0 | used for optional hyper RAM |
| 16 | 2.5V | 0 | used for optional optical fiber |
| 34 | User select | 42 | 0R resistor option to select 3.3V |
| 35 | User select | 42 | 0R resistor option to select 3.3V |
LED's
| LED | Color | FPGA | |
|---|---|---|---|
| D2 | green | M16 | |
| D3 | red | DONE | Active Low |
POF Transceiver
| Transceiver | Bitrate MB/s | Notes |
|---|---|---|
AFBR-59F2Z | 250 |
Connectors
All connectors are are for 100mil headers, all connector locations are in 100 mil grid.
...
Single 3.3V Power supply required.
| FPGA | Design | Typical Power, 25C ambient |
|---|---|---|
| A35T | not configured | TBD |
| A35T | LED Blinky | 170mW |
| A100T | not configured | TBD |
Typical power consumption
...
Overview
Content Tools