Page History

...

<!--
Download Link: Go to Base Folder of the Module or Carrier, for example : https://shop.trenz-electronic.de/en/Download/?path=Trenz_Electronic/TE0712
Use english URL "../en/..
 -->

Overview

<!--
Wiki Link: Go to Base Folder of the Module or Carrier, for example : https://wiki.trenz-electronic.de/display/PD/TE0706
 -->

Refer to https://wiki.trenz-electronic.de/display/PD/TE0706+TRM for the current online version of this manual and other available documentation.

The Trenz Electronic TE0706 Carrier Board provides functionalities for testing, evaluation and development purposes of company's 4 x 5 cm SoMs. The Carrier Board is equipped with various components and connectors for different configuration setups and needs. The interfaces of the SoM's functional units and PL I/O-banks are connected via board-to-board connectors to the Carrier Board's components and connectors for easy user access.

See "4 x 5 SoM Carriers" page for more information about supported 4 x 5 cm SoMs.

Refer to http://trenz.org/te0706-info for the current online version of this manual and other available documentation.

Key Features

• 3 x Samtec LSHM Series Board to Board Connectors
• VG96 connector (mounting holes and solder pads, J6) and 50-pin IDC male connector socket (J5) for access to PL I/O-bank pins
• Micro SD card socket
• SDIO port expander with voltage-level translation
• USB2.0 type A connector, optionally Micro USB 2.0 connector
• 1 x user-push button S2, by default configured as system reset button
• 1 x RJ45 GbE MagJack J3, connected via MDI to B2B connector JB1
• 1 x Marvell Alaska 88E1512 GbE PHY, providing Ethernet interface in conjunction with RJ45 GbE MagJack J2
• 5V power supply barrel jack
• 4 A High-Efficiency Power SoC DC-DC Step-Down Converter (Enpirion EN6347) for 3.3V power supply
• XMOD JTAG- / UART-header JX1
• DIP-switch S1 to set Som's System Controller CPLD control signals
• 3 x VCCIO selection jumper J10, J11 and J12 to set SoM's PL I/O-bank voltages

...