Page History
...
- Xilinx Kintex UltraScale FPGA (XCKU035 or XCKU040)
- 2 banks of 1024 MByte DDR4 SDRAM, 32bit wide memory interface(each DDR 16bit separate)
- 512 Mbit (64 MByte) QSPI Flash
- 3 x Samtec Razor Beam LSHM B2B, 260 terminals total
- 60 x HR I/Os
- 84 x HP I/Os
- 8 x GTH transceiver lanes (TX/RX)
- 2 x MGT external clock inputs - Clocking
- Si5338 - 4 output PLLs, GT and PL clocks
- 200 MHz LVDS oscillator - All power supplies on-board, single power source operation
- Evenly spread supply pins for optimized signal integrity
- Size: 40 x 50 mm
- 3 mm mounting holes for skyline heat spreader
- Rugged for industrial applications
...
- Xilinx Kintex UltraScale FPGA, U1
- Ultra performance oscillator @25.000000 MHz, U3
- 12A PowerSoC DC-DC converter (0.95V), U14
- 12A PowerSoC DC-DC converter (0.95V), U7
Low-jitter precision LVDS oscillator @200.0000 MHz, U11
- Low-dropout (LDO) linear regulator (MGTAVTT 1.20V), U8
- Low-dropout (LDO) linear regulator (MGTAVCC 1.02V), U12
- Samtec Razor Beam™ LSHM-150 B2B connector, JM1
- Samtec Razor Beam™ LSHM-150 B2B connector, JM2
- Samtec Razor Beam™ LSHM-130 B2B connector, JM3
- Programmable quad clock generator, U2
- 64 MByte QSPI Flash, U6
- 8 Gbit DDR4 SDRAM, U4
- 8 Gbit DDR4 SDRAM, U5
- System Controller CPLD, U18Programmable Clock Generator
- Low-dropout (LDO) linear regulator (MGTAUX), U9
- Ultra-low power low-dropout (LDO) regulator (VBATT), U19
...
Storage device name | Content | Notes | |
---|---|---|---|
System Controller CPLD | Default firmware | - | |
OTP Flash area | Empty | Not programmed | |
Quad clock generator OTP area | Empty | programmed | on PCB REV02 and newerNot programmed |
Table 1: TE0841-02 module initial delivery state of programmable on-board devices
...
Date | Revision | Contributors | Description | ||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
| ||||||||||||||||||||||||||
2018-08-07 | v.69 | Ali Naseri |
| ||||||||||||||||||||||||||
2018-07-13 | v.68 | Ali Naseri |
| ||||||||||||||||||||||||||
2018-07-10 | v.58 | John Hartfiel |
| ||||||||||||||||||||||||||
2018-03-13 | v.57 | Jan Kumann, Ali Naseri |
| ||||||||||||||||||||||||||
-- | all |
|
|
Table 18: Document change history
...
Overview
Content Tools