Page History

...

1. ARM JTAG Connector (DS-5 D-Stream) J15 - functionality depends on connected module
2. 12-pin IDC Molex 90130-3212 header socket J1 (right angle, max. VCCIO voltage 3.3V)

3. RJ45 GbE Connector

4. SD Card Socket - Zynq SDIO0 bootable SD port
5. 12-pin IDC Molex 90130-3212 header socket (right angle)  J2J2
6. Micro USB Connector J12 (Device, Host or OTG Modes)
7. Battery holder for CR1220 (RTC backup voltage)
8. 12-pin IDC Molex 90130-1212 header socket (vertical)  J5J5
9. 12-pin IDC Molex 90130-1212 header socket (vertical)  J6J6
10. User Push-Button S2 ("RESTART" button by default)
11. User Push-Button S1 ("RESET" button by default)
12. User LEDs D6, D7, D8, D9
13. User LEDs D4, D5, D14, D15
14. Mini USB Connector (USB JTAG and UART Interface) J7
15. User 4-bit DIP-Switch S3
16. User 4-bit DIP-Switch S4
17. FTDI FT2232H USB 2.0 High Speed to UART/FIFO
18. Lattice Semiconductor MachXO2 1200HC System Controller CPLD
19. Jumper J4 to fix user button S2 to switched state
20. 40-Pin-Header J13 for access to PL IO-bank-pins
21. 40-Pin-Header J11 for access to PL IO-bank-pins
22. Samtec Razor Beam™ LSHM-150 B2B connector JB1
23. Samtec Razor Beam™ LSHM-150 B2B connector JB2
24. Samtec Razor Beam™ LSHM-130 B2B connector JB3
25. Mini-Fit JR Header 2Pol for 12V power supply J10
26. Jumper J21 to select supply voltage of VIOTB
27. Jumper J9, J19, J20 to select supply voltage of USB-VBUS

...