Page History
...
| FMC(1) | FMC Vadj | PMODS | ETH | HDMI | Camera Link | SD Card | USB Host | VBATT | |
|---|---|---|---|---|---|---|---|---|---|
| TE0710 | Support | 1.8V B16 I/O | None | not used | |||||
| TE0711 | Support | ||||||||
| TE0712 | Support | 100 MBit | MGT's | ||||||
| TE0713 | Support | ||||||||
| TE0715-15 | Support | Full support | MGT's | Full support | Full support | ||||
| TE0715-30 | Support | Max 1.8V | MGT's | Full support | Full support | ||||
| TE0720 | Support | Full support | Full support | Full support | Ffull support | Full support | Full support | Full support | used for RTC and Key RAM |
| TE0741 | Support | MGT's | Not supported | ||||||
| TE0841 | Support | MGT's | Not supported |
- (1) FMC is a LPC Connector on TE0701: DP0_..., GBTCLK0_... and TRST_L Pins are not connected. GA0 and GA1 set to GND. I2C and JTAG access over CPLD.
Separate TE0701_FMC_PINOUT table (PDF/XLSX) is available on: Trenz_Electronic Download-Pinout
TE0703
| ETH | SD Card | USB Host | Reset | User LEDs | USB UART | USB JTAG | |
|---|---|---|---|---|---|---|---|
| TE0710 | 1.8V B16 I/O | Not supported | Yes | 2 | Yes | Yes | |
| TE0711 | Not supported | Yes | Yes | Yes | |||
| TE0712 | 100 MBit | Not supported | Yes | Yes | Yes | ||
| TE0713 | Not supported | Yes | Yes | Yes | |||
| TE0715 | Full support | Yes | Yes | Yes | |||
| TE0720 | Full support | Full support | Full support | Yes | Yes | Yes | |
| TE0741 | Not supported | Yes | Yes | Yes | |||
| TE0841 | Not supported | Yes | Yes | Yes |
...
Overview
Content Tools