Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


Scroll Only (inline)
Refer to for downloadable version of this manual and the rest of available documentation.
Trenz Electronic TE0713 is an industrial-grade FPGA module integrating a Xilinx Artix-7 FPGA, a 10/100 Mbit Ethernet transceiverUSB 3.0, 1 GByte of DDR3 SDRAM, 32 MByte Flash memory for configuration and operation, and powerful switching-mode power supplies for all on-board voltages. Numerous configurable I/Os are provided via rugged high-speed strips. All this on a tiny footprint, smaller than a credit card size at very competitive price. All Trenz Electronic SoMs in 4 x 5 cm form factor are mechanically compatible.


  1. Xilinx Artix-7 XC7A series FPGA, U1
  2. ...
  3. ...
  4. System Controller CPLD, Lattice Semiconductor MachXO2-256HC, U3
  5. ...

Key Features

  • Xilinx Artix-7 (15T to 200T) SoM (System on Module)
  • Both industrial and commercial temperature ranges available
  • Rugged for high shock and high vibration resistance
  • 1 GByte DDR3 32-bit SDRAM
  • 32 MByte QSPI Flash memory (with XiP support)
  • Programmable clock generator
    • GTP transceiver clock (default 125 MHz)
    • Fabric clock (default 200 MHz)
  • Plug-on module with 2 × 100-pin and 1 × 60-pin high-speed hermaphroditic strips
  • 142 FPGA I/Os (71 differential pairs) available on board-to-board connectors
  • 4 GTP (multi gigabit transceiver) lanes 
  • External clock input for GTP transceivers via B2B connector
  • On-board high-efficiency DC-DC converters
  • System management and power sequencing
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • User configurable LED
  • Evenly-spread supply pins for good signal integrity