Page History
...
- (1) FMC is a LPC Connector on TE0701: DP0_..., GBTCLK0_... and TRST_L Pins are not connected. GA0 and GA1 set to GND. I2C and JTAG access over CPLD.
Separate TE0701_FMC_PINOUT table (PDF/XLSX) is available on: Trenz_Electronic Download-Pinout - (2) HP IO Banks only support 1.8V
- (3) MGT's Lanes goes to SD-Level shifter, it's recommended to desoldering level shifter
- (4) MGT's Lanes goes to SD-Level shifter, but module side 1.8V is not connected
CL Connector is usable as Cameralink only with module that map LVDS pins to this connector
TE0703
| ETH | SD Card | USB Host | Reset | User LEDs | USB UART | USB JTAG | |
|---|---|---|---|---|---|---|---|
| TE0710 |  |  , 1.8V B16 I/O | |  |  ,2 | | |
| TE0711 | | | | | | | |
| TE0712 | ,100 MBit | | | | | | |
| TE0713 | | | | | | | |
| TE0715-15 | | | | | | | |
TE0715-30  (2) | | | | | | | |
| TE0720 | | | | | | | |
| TE0741 (4) | | ,MGT's | | | | | |
| TE0820 (2) | | | | | | | |
| TE0841 (2)(3) | | ,MGT's | | | | | |
...
Overview
Content Tools