Page History
 | 2015 First year an Xilinx 7 series based product or Zynq based product passed into semifinals for the Trip To Space A small step for those on the way to All Programmable ... ... world? |  |
| Scroll pdf ignore | |
|---|---|
Table of Contents
|
Overview
| Note |
|---|
TE0722 Zynq Module is without DDR, special FSBL is needed to startup correctly see, DDR less ZYNQ Design |
Power supply
TE0722 need external 3.3V power supply. It is possible but not recommended to supply TE0722 with TE0790 programmer, but only for small designs (max ~300mA over XMOD possible).
If TE0722 is powered via XMOD (max. ~ 300mA), use XMOD DIP-Switch:
| POS | Value |
|---|---|
| 1 | ON |
| 2 | OFF |
| 3 | ON |
| 4 | ON |
If TE0722 is powered with external 3.3V, use XMOD DIP-Switch:
| POS | Value |
|---|---|
| 1 | ON |
| 2 | OFF |
| 3 | OFF |
| 4 | OFF |
DIP-Switches
There are no DIPs on TE0722. In case of TE0790 (XMOD) usage, see power supply section.
LEDs
Working in process. Will be coming soon.
JTAG/UART
JTAG and UART is possible over J2 connector.
Use XMOD (TE0790) Programmer with special firmware
XMOD Programmer support JTAG and UART over same USB cable.
| Warning |
|---|
|
Use other JTAG Programmer
With other Programmer only JTAG is possible. UART must be connected separate.
| TE0722-J2 Pin | TE0722-Name | Platform Cable - Name | Platform Cable - Color | external power supply |
|---|---|---|---|---|
| 1 | GND | -- | -- | GND |
| 2 | GND | GND | black | -- |
| 3 | B34_L4_N(def. UART TX) | -- | -- | -- |
| 4 | TCK | TCK | yellow | -- |
| 5 | 3.3V | VREF | red | -- |
| 6 | 3.3V | -- | -- | 3.3V |
| 7 | B34_L10_P(def. UART RX) | -- | -- | -- |
| 8 | TMS | TMS | green | -- |
| 9 | TDI | TDI | white | -- |
| 10 | TDO | TDO | violet | -- |
Reference Designs
Notes
Overview
Content Tools