Page History

^*used as reference

Design supports following carriers:

Additional HW Requirements:

Content

For general structure and usage of the reference design, see Project Delivery - Xilinx AMD devices

Design Sources

Additional Sources

Prebuilt

Download

Reference Design is only usable with the specified Vivado/Vitis/PetaLinux version. Do never use different Versions of AMD(Xilinx) Software for the same Project.

Reference Design is available on:

• TE0712 "Test Board" Reference Design

Design Flow

See also: Xilinx AMD Development ToolsTools#XilinxSoftware-BasicUserGuides

• Xilinx AMD Development ToolsTools#XilinxSoftware-BasicUserGuides

• Vivado Projects - TE Reference Design

• Project Delivery.

The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.

TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/Vitis GUI. For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality

1. Run _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:

   Code Block
   language bash theme Midnight title _create_win_setup.cmd/_create_linux_setup.sh
   ------------------------Set design paths---------------------------- -- Run Design with: _create_win_setup -- Use Design Path: <absolute project path> -------------------------------------------------------------------- -------------------------TE Reference Design--------------------------- -------------------------------------------------------------------- -- (0) Module selection guide, project creation...prebuilt export... -- (1) Create minimum setup of CMD-Files and exit Batch -- (2) Create maximum setup of CMD-Files and exit Batch -- (3) (internal only) Dev -- (4) (internal only) Prod -- (c) Go to CMD-File Generation (Manual setup) -- (d) Go to Documentation (Web Documentation) -- (g) Install Board Files from Xilinx Board Store (beta) -- (a) Start design with unsupported Vivado Version (beta) -- (x) Exit Batch (nothing is done!) ---- Select (ex.:'0' for module selection guide):

   
   

2. Press 0 and enter to start "Module Selection Guide"

3. (optional Win OS) Generate Virtual Drive or use short directory  for the reference design (for example x:\<design name>)
4. Createproject and follow instructions of the product selection guide, settings file will be configured automatically during this process.
   

   • optional for manual changes: Select correct device and AMD(Xilinx) install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"

     Note
     Note: Select correct one, see also Vivado Board Part Flow

     
     

5. Create hardware description file (.xsa file) for PetaLinux project and export to prebuilt folder

   Code Block
   language py theme Midnight title run on Vivado TCL (Script generates design and export files into "<project folder>\prebuilt\hardware\<short name>")
   TE::hw_build_design -export_prebuilt

   
   

   Info
   Using Vivado GUI is the same, except file export to prebuilt folder.

   
   

6. Create and configure your PetaLinux project with exported .xsa-file, see PetaLinux KICKstart
   • use TE Template from "<project folder>\os\petalinux"

   • use exported .xsa file from "<project folder>\prebuilt\hardware\<short name>" . Note: HW Export from Vivado GUI creates another path as default workspace.

   • Thepetalinux build images are located in the "<plnx-proj-root>/images/linux" directory
     

     Info
     Important Note: Select correct Flash partition offset on petalinux-config: Subsystem Auto HW Settings → Settings → Flash Settings,  FPGA+Boot+bootenv=0x900000 0xA00000 (increase automatically generate Boot partition), increase image size to A:, see Config

     
     

     
     

7. Configure the boot.scr file as needed, see Distro Boot with Boot.scr. Kernel flash address and kernel size are set here.
8. Copy PetaLinux build image files to prebuilt folder

   • copy u-boot.elf, image.ub and boot.scr from "<plnx-proj-root>/images/linux" to prebuilt folder
     

     Info
     "<project folder>\prebuilt\os\petalinux\<ddr size>" or "<project folder>\prebuilt\os\petalinux\<short name>"

     
     

     Page properties
     hidden true id Comments
     This step depends on Xilinx Device/Hardware for Zynq-7000 series copy u-boot.elf, image.ub and boot.scr from "<plnx-proj-root>/images/linux" to prebuilt folder for ZynqMP copy u-boot.elf, bl31.elf, image.ub and boot.scr from "<plnx-proj-root>/images/linux" to prebuilt folder for ... ...

     
     

9. Generate Programming Files with Vitis

   Code Block
   language py theme Midnight title run on Vivado TCL (Script generates applications and bootable files, which are defined in "test_board\sw_lib\apps_list.csv")
   TE::sw_run_vitis -all TE::sw_run_vitis (optional; Start Vitis from Vivado GUI or start with TE Scripts on Vivado TCL)

   
   

   Note
   TCL scripts generate also platform project, this must be done manually in case GUI is used. See Vitis

   
   

10. (Optional) BlockRam Firmware Update

    1. Copy "<project folder>\prebuilt\software\<short name>\spi_bootloader.elf" into  "<project folder>\firmware\microblaze_0\"

    2. Copy "<project folder>\workspace\sdk\scu_te0712\Release\scu_te0712.elf" into "\firmware\microblaze_mcs_0\"

    3. Regenerate Vivado Project or Update Bitfile only with "spi_bootloader.elf" and "scu_te0712.elf"

       Code Block
       language bash theme Midnight
       TE::hw_build_design -export_prebuilt TE::sw_run_vitis -all

       
       

Launch

Programming

AMD(Xilinx) documentation for programming and debugging: Vivado/Vitis/SDSoC-Xilinx Software Programming and Debugging

Get prebuilt boot binaries

1. Run _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell
2. Press 0 and enter to start "Module Selection Guide"
   1. Select assembly version
   2. Validate selection

   3. Select create and open delivery binary folder

      Info
      Note: Folder "<project folder>\_binaries_<Article Name>" with subfolder "boot_<app name>" for different applications will be generated

      
      

QSPI-Boot mode

Option for u-boot.mcs on QSPI Flash.
(u-boot.mcs contains all files necessary to boot up linux)

1. Connect the USB cable(JTAG) and power supply on carrier with module

2. Open Vivado Project with "vivado_open_existing_project_guimode.cmd" or if not created, create with "vivado_create_project_guimode.cmd".
   Enter the following TCL-Command into the TCL-Console inside Vivado to program the QSPI Flash.

   Code Block
   language py theme Midnight title run on Vivado TCL (Script programs u-boot.mcs onto QSPI flash)
   TE::pr_program_flash -swapp u-boot

   
   

3. Reboot (if not done automatically)

SD-Boot mode

Not used on this Example.

JTAG

Not used on this Example.

Usage

1. Prepare HW like described on section Programming

2. Connect UART USB (most cases same as JTAG)

3. Select QSPI as Boot Mode

   Info
   Note: See TRM of the Carrier, which is used.

   
   

4. Power On PCB and push the reset button if present on carrier.

   Expand
   title boot process
   1. FPGA Loads Bitfile from Flash, 2. MCS Firmware configure SI5338 (per default off with REV03) and starts Microblaze, 3. SPI Bootloader from Bitfile Firmware loads U-Boot into DDR (This takes a while), 4. U-boot loads Linux from QSPI Flash into DDR

   
   

Linux

1. Open Serial Console (e.g. putty)

   • Speed: 9600

   • COM Port

     Info
     Win OS, see device manager, Linux OS see dmesg |grep tty (UART is *USB1)

     
     

2. Boot process takes a while, please wait...
   Image Removed
   Image Added
   
   

3. Linux Console:
   

   Code Block
   language bash theme Midnight
   petalinux login: root Password: rootpetalinux -> assign new password

   
   

   Info
   Note: Wait until Linux boot finished. Linux boot process is slower on Microblaze.

   
   

4. You can use Linux shell now.
   

   Code Block
   language bash theme Midnight
   udhcpc (ETH0 check)

   
   

Vivado HW Manager

• Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder).

  • Set radix from VIO signals (MGT REF, MIG_OUT, CLK1B, CLK0) to unsigned integer.
    Note: Frequency Counter is inaccurate and displayed unit is Hz

• Monitoring:
  

  • MGT REF~125MHz, MIG_50MHZ~50MHz., CLK1B ~50MHz, CLK0~100MHz

  • System reset from MCS and GIO outputs

• • ~50MHz, CLK0~100MHz

  • System reset from MCS and GIO outputs

  • 1. → Si5338 PLL was programmed  0 = NO |  1 = YES
  • 2. → Error occurred during PLL programming   0 = NO |  1 = YES
  • 3. → Module Revision ( Can be set in the Blockdiagram → SC0712 IP)
    

Image Removed

System Design - Vivado

Block Design

Image Removed

REV01

Image Removed

Constraints

Basic module constraints

set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.CONFIGRATE 66 [current_design]
set_property CONFIG_VOLTAGE 3.3 [current_design]
set_property CFGBVS VCCO [current_design]
set_property CONFIG_MODE SPIx4 [current_design]
set_property BITSTREAM.CONFIG.SPI_32BIT_ADDR YES [current_design]
set_property BITSTREAM.CONFIG.SPI_BUSWIDTH 4 [current_design]
set_property BITSTREAM.CONFIG.M1PIN PULLNONE [current_design]
set_property BITSTREAM.CONFIG.M2PIN PULLNONE [current_design]
set_property BITSTREAM.CONFIG.M0PIN PULLNONE [current_design]

set_property BITSTREAM.CONFIG.USR_ACCESS TIMESTAMP [current_design]

set_property BITSTREAM.CONFIG.UNUSEDPIN PULLDOWN [current_design]

Design specific constraints

set_property PULLDOWN true [get_ports reset]

#I2C
#set_property PACKAGE_PIN W21 [get_ports PLL_I2C_scl_io]
#set_property IOSTANDARD LVCMOS33 [get_ports PLL_I2C_scl_io]
#set_property PACKAGE_PIN T20 [get_ports PLL_I2C_sda_io]
#set_property IOSTANDARD LVCMOS33

set_property PULLDOWN true [get_ports reset]

#I2CPLL_I2C_sda_io]
set_property PACKAGE_PIN W21 [get_ports PLL_I2C_ext_scl_o]
set_property IOSTANDARD LVCMOS33 [get_ports PLL_I2C_ext_scl_o]
set_property PACKAGE_PIN T20 [get_ports PLL_I2C_ext_sda]
set_property IOSTANDARD LVCMOS33 [get_ports PLL_I2C_ext_sda]

#Reset
set_property PACKAGE_PIN T3 [get_ports reset]
set_property IOSTANDARD LVCMOS15 [get_ports reset]
#CLKS
set_property PACKAGE_PIN R4 [get_ports {CLK1B[0]}]
set_property IOSTANDARD LVCMOS15 [get_ports {CLK1B[0]}]
set_property PACKAGE_PIN K4 [get_ports {CLK0_clk_p[0]}]
set_property IOSTANDARD DIFF_SSTL15 [get_ports {CLK0_clk_p[0]}]

#ETH PHY
set_property PACKAGE_PIN N17 [get_ports phy_rst_n]
set_property IOSTANDARD LVCMOS33 [get_ports phy_rst_n]

#EEPROM onewire (MAC ADDRESS)
set_property IOSTANDARD LVCMOS33 [get_ports EEPROM_tri_io]
set_property PACKAGE_PIN V22 [get_ports EEPROM_tri_io]

#I2C connected to CPLD
set_property -dict {IOSTANDARD LVCMOS33 LVCMOS33 PACKAGE_PIN W22} [get_ports EEPROMIIC_0_triscl_io]
set_property -dict {IOSTANDARD LVCMOS33 PACKAGE_PIN V22U22} [get_ports EEPROMIIC_0_trisda_io]

create_clock -period 8.000 -name mgt_clk0_clk_p -waveform {0.000 4.000} [get_ports mgt_clk0_clk_p]


create_clock -period 10.000 -name {CLK0_clk_p[0]} -waveform {0.000 5.000} [get_ports {CLK0_clk_p[0]}]
create_clock -period 20.000 -name {CLK1B[0]} -waveform {0.000 10.000} [get_ports {CLK1B[0]}]
create_clock -period 15.152 -name CFGMCLK -waveform {0.000 7.576} [get_pins -hierarchical -filter {NAME =~*NO_DUAL_QUAD_MODE.QSPI_NORMAL/*STARTUP_7SERIES_GEN.STARTUP2_7SERIES_inst/CFGMCLK}]


set_false_path -from [get_clocks {CLK0_clk_p[0]}] -to [get_clocks clk_pll_i]
set_false_path -from [get_clocks mgt_clk0_clk_p] -to [get_clocks clk_pll_i]
set_false_path -from [get_pins {msys_i/SC0712_0/U0/rst_delay_i_reg[3]/C}] -to [get_pins -hierarchical -filter {NAME =~*u_msys_mig_7series_0_0_mig/u_ddr3_infrastructure/rstdiv0*/PRE}]
set_false_path -from [get_clocks -of_objects [get_pins msys_i/mig_7series_0/u_msys_mig_7series_0_0_mig/u_ddr3_infrastructure/gen_ui_extra_clocks.mmcm_i/CLKFBOUT]] -to [get_clocks mgt_clk0_clk_p]
set_false_path -from [get_clocks clkxlnx_pll_i] -toshared_i0 [get_clockspins {msys_i/util_ds_buf_0/U0/IBUF_OUT[0]vio_0/inst/PROBE_IN_INST/probe_in_reg_reg[*]/D}]
set_false_path -from [get_pins {msys_i/labtools_fmeter_0/U0/F_reg[*]/C}] -to [get_pins {msys_i/vio_0/inst/PROBE_IN_INST/probe_in_reg/F_reg[*]/DC}] -to $_xlnx_shared_i0
set_false_path -from [get_pins msys_i/labtools_fmeter_0/U0/COUNTER_REFCLK_inst/bl.DSP48E_2/CLK] -to [get_pins {msys_i/vio_0/inst/PROBE_IN_INST/probe_in_reg_reg[*]/D}]$_xlnx_shared_i0
set_false_path -from [get_pins {msys_i/labtools_fmeter_0/U0/FMETER_gen[*].COUNTER_F_inst/bl.DSP48E_2/CLK}] -to [get_pins {msys_i/labtools_fmeter_0/U0/F_reg[*]/D}]

Software Design - Vitis

For Vitis project creation, follow instructions from:

Vitis

Application

Template location: "<project folder>\sw_lib\sw_apps\"

scu_te0712

MCS Firmware to configure SI5338 and Reset System.

spi_bootloader

TE modified SPI Bootloader from Henrik Brix Andersen.

Bootloader to load app or second bootloader from flash into DDR.

Here it loads the u-boot.elf from QSPI-Flash to RAM. Hence u-boot.srec becomes redundant.

Descriptions:

• Modified Files: bootloader.c
• Changes:
  
  • Change the SPI defines in the header
  • Add some reiteration in the frist spi read call

hello_te0712

Hello TE0712 is a AMD(Xilinx) Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. Vitis is used to generate u-boot.srec(obsolete). Vivado to generate *.mcs

eeprom

eeprom is a petalinux application that executes on startup. It reads the unique 48-bit MAC from the onboard eeprom and uses it to set the system MAC address.

Software Design -  PetaLinux

For PetaLinux installation and project creation, follow instructions from:

• PetaLinux KICKstart

Config

Start with petalinux-config or petalinux-config --get-hw-description

(Tipp: Search for Settings with shortcut "Shift"+"/")

Changes:

• SUBSYSTEM_FLASH_AXI_QUAD_SPI_0_BANKLESS_PART0_SIZE = 0x5E0000  (fpga)

• SUBSYSTEM_FLASH_AXI_QUAD_SPI_0_BANKLESS_PART1_SIZE = 0x400000  (boot)

• SUBSYSTEM_FLASH_AXI_QUAD_SPI_0_BANKLESS_PART2_SIZE = 0x20000    (bootenv)

• SUBSYSTEM_FLASH_AXI_QUAD_SPI_0_BANKLESS_PART3_SIZE = 0xB00000  (kernel)

  • (with this kernel flash address is 0xA00000 (fpga+boot+bootenv) and Kernel size 0xB00000)

U-Boot

Start with petalinux-config -c u-boot

Changes:

• CONFIG_ENV_IS_NOWHERE=y

• # CONFIG_ENV_IS_IN_SPI_FLASH is not set

• # CONFIG_PHY_ATHEROS is not set

• # CONFIG_PHY_BROADCOM is not set

• # CONFIG_PHY_DAVICOM is not set

• # CONFIG_PHY_LXT is not set

• # CONFIG_PHY_MICREL_KSZ90X1 is not set

• # CONFIG_PHY_MICREL is not set

• # CONFIG_PHY_NATSEMI is not set

• # CONFIG_PHY_REALTEK is not set

• CONFIG_RGMII=y

Content of platform-top.h located in <plnx-proj-root>\project-spec\meta-user\recipes-bsp\u-boot\files:

#include <configs/microblaze-generic.h>
#include <configs/platform-auto.h>

#define CONFIG_SYS_BOOTM_LEN 0xF000000

Device Tree

Content of system-user.dtsi located in <petalinux project directory>\project-spec\meta-user\recipes-bsp\device-tree\files:

/include/ "system-conf.dtsi"
/ {
};
 
/* QSPI PHY */
 
&axi_quad_spi_0 {
    #address-cells = <1>;
    #size-cells = <0>;
    flash0: flash@0 {
        compatible = "jedec,spi-nor";
        spi-tx-bus-width=<1>;
        spi-rx-bus-width=<4>;
        reg = <0x0>;
        #address-cells = <1>;
        #size-cells = <1>;
        spi-max-frequency = <25000000>;
    };
};
 
 
/* ETH PHY */
&axi_ethernetlite_0 {
    phy-handle = <&phy0>;
    mdio {
        #address-cells = <1>;
        #size-cells = <0>;
        phy0: phy@0 {
            device_type = "ethernet-phy";
            reg = <1>;
        };
    };
};

Kernel

Start with petalinux-config -c kernel

Changes:

• No changes.

Rootfs

Start with petalinux-config -c rootfs

Changes:

• # CONFIG_dropbear is not set

• # CONFIG_dropbear-dev is not set

• # CONFIG_dropbear-dbg is not set

• # CONFIG_package-group-core-ssh-dropbear is not set

• # CONFIG_packagegroup-core-ssh-dropbear-dev is not set

• # CONFIG_packagegroup-core-ssh-dropbear-dbg is not set

• # CONFIG_imagefeature-ssh-server-dropbear is not setnot set

optional: to change the password settings at startup look at Adding extra users to the petalinux system.

"Dropbear" is part of the "petalinux-image-minimal" configuration, so changes in the petalinux rootfs will not be applied. To remove "dropbear" anyway, enter the following line in petalinuxbsp.conf in ..\petalinux\project-spec\meta-user\conf:

PACKAGE_EXCLUDE += " dropbear dropbear-openssh-sftp-server dropbear-dev dropbear-dbg dropbear-openssh-sftp-server packagegroup-core-ssh-dropbear packagegroup-core-ssh-dropbear-dbg packagegroup-core-ssh-dropbear-dev"

Applications

No additional application.

Additional Software

SI5338

File location "<project folder>\misc\Si5338\Si5338-*.slabtimeproj"

General documentation how you work with this project will be available on Si5338

Appx. A: Change History and Legal Notices

Document Change History

To get content of older revision  got to "Change History"  of this page and select older document revision number.

Legal Notices