Page History
...
TEBF0808 | TE0790-02 (with green dot) | TE0790-02L | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
|
Note: with CPLD Firmware REV06 or newer, S4.4 can be set to OFF, to save power, if Starter Kit is powered off with Power Button.
For more information, see:TEBF0808, TEBF0808 Master CPLD and TEBF0808 Slave CPLD.
Starter Kit Status
- Section is currently not complete -
...
Identification: FANs do not work, some LEDs blinking.
LED description(need CPLD Firmware REV06 or newer):
BLUE Power LED on enclosure | ||
---|---|---|
Status/ User | Blink Sequence | Comment |
Power | ******** (slow blink) | Indicate board is powered off. |
RGPIO controlled | User Defined | RGPIO 14 and 15, if RGPIO is active. |
MIO40 | User Defined | MIO40, if RGPIO is deactivated |
Main Power Switch is ON and Power Button is pressed first time
...
Identification: FANs do work, LEDs blinking states change.
LED description (need CPLD Firmware REV06 or newer):
BLUE Power LED on enclosure | ||
---|---|---|
Status/ User | Blink Sequence | Comment |
Power | ******** (slow blink) | Indicate board is powered off. |
RGPIO controlled | User Defined | RGPIO 14 and 15, if RGPIO is active. |
MIO40 | User Defined | MIO40, if RGPIO is deactivated |
Red HD LED on enclosure | ||
---|---|---|
Status/ User | Blink Sequence | Comment |
PS_INIT_B | ******** | Indicates the PS is not initialized after a power-on reset (POR). |
PS_ERROR_OUT | *****ooo | The PS_ERROR_OUT signal is asserted for accidental loss of power, an error, or an exception in the PMU. |
ERR_STAT | ****oooo | The PS_ERROR_STATUS indicates a secure lockdown state. Alternatively, it can be used by the PMU firmware to indicate system status. |
RGPIO controlled | User Defined | RGPIO 16 and 17, if RGPIO is active |
SC0 | User Defined | SC0 (PL IO), if RGPIO is deactivated |
Notes
Most LEDs are CPLD Firmware dependents, see TEBF0808 Master CPLD and TEBF0808 Slave CPLD
...