Page History

Table of contents

General instructions

CPLD Access

With TEB0729:

• Connect MiniUSB cable to XMOD programm
• Set DIP S2-1 to OFF
• Power ON the board
• Run "Lattice Diamond Programmer"

• Select "Create new project from JTAG chain" and press "OK"

...

Available CPLD Firmware

• TEBF0808 CPLDs TE0729 CPLD - Firmware description of Master an Slave CPLD
• TEBF0808 Master CPLD - Firmware description Master CPLD
• TEBF0808 Slave CPLD - Firmware description Slave CPLD
• Default delivered Firmware
It's recommended to update always both CPLDs togetherwith different Variants

• TEB0729-REV02_Plus is default delivered Firmware for modified TEB0729-REV02 and newer TEB0729 Revisions.
• TEB0729-REV02 is optional Firmware variant, for older B2B Connector assignment.

Download

• TE0729/<PCB Revision>/Firmware/
  • Use files from the subfolders of your PCB revision

General instructions