Page History
...
Absolute Maximum Ratings
Parameter | Min | Max | Units | Reference document | |
|---|---|---|---|---|---|
VIN supply voltage (Variant TE0725LP-01-100-2C) | -0.3 | 4 | V | TI TPS62510 data sheet | |
| VIN supply voltage (Variant TE0725LP-01-100-2D and -2L) | 3.3V supply voltage-0.133. | 62 | V | -Xilinx datasheet DS181 / TI TPS62510 datasheet | |
| HR I/O banks supply voltage (VCCO) | -0.5 | 3.6 | V | Xilinx datasheet DS181 | |
| HR I/O banks input voltage (VCCIO single ended) | -0.4 | VCCO + 0.55 | V | Xilinx datasheet DS181 | |
Storage Temperature | -40 | +85100 | °C | LED SML-P11x series datasheet |
Table 13: Absolute maximum ratings
...
| Parameter | Min | Max | Units | Reference document | |||
|---|---|---|---|---|---|---|---|
| VIN supply voltage (Variant TE0725LP-01-100-2C) | 1.8V3.135 | 3.458 | V | - | TI TPS62510 data sheet | ||
| VIN | HR I/O bankssupply voltage ( | VCCOVariant TE0725LP-01-100-2D and -2L) | 1. | 148V | 1.89 | V | Xilinx datasheet DS181 / TI TPS62510 datasheet |
| HR I/O banks supply voltage (VCCO) | 1.14 | 3.3.465 | V | Xilinx datasheet DS181 | |||
| HR I/O banks input voltage (VCCIO single ended) | -0.20 | VCCO + 0.20 | V | Xilinx datasheet DS181 | |||
| Operating Temperature | 0 | +85 | °C | -Xilinx datasheet DS181 |
Table 14: Recommended operating conditions
| Note |
|---|
| Please check Xilinx datasheet datasheet DS181 for complete list of absolute maximum and recommended operating ratings for the Artix-7 device. |
...
Please note that two different units are used on the figures below, SI system millimeters (mm) and imperial system thousandths of an inch(mil). This is because of the 100mil pin headers used, see also explanation below. To convert mils to millimeters and vice versa use formula 100mil's = 2,54mm.
All 100 mil pin headers are in 100 mil grid, the M3 mounting holes are in 50 mil grid aligned to the centers of the 100mil headers. The module is symmetrical, turning it 180 degrees will keep all I/O and Power pins in both 50 pin headers in compatible places.
Figure 4: Module physical dimensions drawing
Operating Temperature Ranges
Commercial grade modules
All parts conform to at least commercial temperature range of 0°C to +70°C.
Industrial grade modules
All parts are at least industrial temperature range of -40°C to +85°C.
The module operating temperature range depends on customer design and cooling solution. Please contact us for options.
Weight
Board size: PCB 72.9mm × 34.8mm
PCB thickness: ca. 1.65mm
Highest part on the PCB are the pin headers (2.54mm pitch). Please download the step model for exact numbers.
The dimensions are given in mm and mil (milli inch).
Figure 4: Module physical dimensions drawing8.5 g Plain module.
Revision History
Hardware Revision History
| Date | Revision | Notes | PCN | Documentation Link |
|---|---|---|---|---|
| 2016-07-21 | 01 | PrototypesFirst production release | - | TE0725LP-01 |
Table 15: Module hardware revision history
...
| Date | Revision | Contributors | Description | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ali Naseri, Jan Kumann | Initial version. |
...
Overview
Content Tools