Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Page properties
hiddentrue
idComments

Template Revision 2.8 - on construction

Design Name always "TE Series Name" + Design name, for example "TE0720 Test Board"


HTML
<!--
Template Revision 1.3
Basic Notes
 - export PDF to download, if vivado revision is changed!
 - Template is for different design and SDSoC and examples, remove unused or wrong description!
 -->
Scroll Only (inline)
Online version of this manual and other related documents can be found at https://wiki.trenz-electronic.de/display/PD/Trenz+Electronic+Documentation
Scroll pdf ignore

Table of contents

Table of Contents
outlinetrue

Overview

HTML
<!--
General Design description
 -->

 MicroBlaze Design with Hello TE0725 example in endless loop.

Key Features

HTML
<!--
Add Basic Key Features of the design (should be tested)
 -->
Excerpt
  • MicroBlaze
  • QSPI
  • I2C
  • UART

Revision History

HTML
<!--
- Add changes from design
- Export PDF to download, if vivado revision is changed!
  -->

...

  • bugfix board part files clk settings

...

  • 2018.2 update

...

  • initial release

Release Notes and Know Issues

HTML
<!--
- add known Design issues and general Notes for the current revision
 -->

...

Requirements

Software

HTML
<!--
Add needed external Software
   -->

...

Hardware

HTML
<!--
Hardware Support
   -->

Basic description of TE Board Part Files is available on TE Board Part Files.

Complete List is available on <design name>/board_files/*_board_files.csv

Design supports following modules:

...

Design supports following carriers:

...

Additional HW Requirements:

...

Content

HTML
<!--
Remove unused content
  -->

For general structure and of the reference design, see Project Delivery - Xilinx devices

Design Sources

...

Additional Sources

...

Prebuilt

HTML
<!-- 

<table width="100%">
<tr> <th>File                                 </th> <th>File-Extension</th>  <th>Description                                                                              </th> </tr>
<tr> <td>BIF-File                             </td> <td>*.bif         </td>  <td>File with description to generate Bin-File                                               </td> </tr>
<tr> <td>BIN-File                             </td> <td>*.bin         </td>  <td>Flash Configuration File with Boot-Image (Zynq-FPGAs)                                    </td> </tr>
<tr> <td>BIT-File                             </td> <td>*.bit         </td>  <td>FPGA Configuration File                                                                  </td> </tr>
<tr> <td>DebugProbes-File                     </td> <td>*.ltx         </td>  <td>Definition File for Vivado/Vivado Labtools Debugging Interface                           </td> </tr>
<tr> <td>Debian SD-Image                      </td> <td>*.img         </td>  <td>Debian Image for SD-Card                                                                </td> </tr>
<tr> <td>Diverse Reports                      </td> <td>  ---         </td>  <td>Report files in different formats                                                        </td> </tr>
<tr> <td>Hardware-Platform-Specification-Files</td> <td>*.hdf         </td>  <td>Exported Vivado Hardware Specification for SDK/HSI                                       </td> </tr>
<tr> <td>LabTools Project-File                </td> <td>*.lpr         </td>  <td>Vivado Labtools Project File                                                             </td> </tr>
<tr> <td>MCS-File                             </td> <td>*.mcs         </td>  <td>Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)                  </td> </tr>
<tr> <td>MMI-File                             </td> <td>*.mmi         </td>  <td>File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only) </td> </tr>
<tr> <td>OS-Image                             </td> <td>*.ub          </td>  <td>Image with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk)             </td> </tr>
<tr> <td>Software-Application-File            </td> <td>*.elf         </td>  <td>Software Application for Zynq or MicroBlaze Processor Systems                            </td> </tr>
<tr> <td>SREC-File                            </td> <td>*.srec        </td>  <td>Converted Software Application for MicroBlaze Processor Systems                          </td> </tr>    
</table>
-->

...

File

...

File-Extension

...

Description

...

MCS-File

...

*.mcs

...

Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

...

MMI-File

...

*.mmi

...

File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)

...

Download

Reference Design is only usable with the specified Vivado/SDK/PetaLinux/SDx version. Do never use different Versions of Xilinx Software for the same Project.

HTML
<!--
Add correct path:https://shop.trenz-electronic.de/en/Download/?path=Trenz_Electronic/TE0803/Reference_Design/2017.1/Starterkit
  -->

Reference Design is available on:

Design Flow

HTML
<!--
Basic Design Steps
Add/ Remove project specific 
  -->
Note

Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first lunch.

Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.

See also:

The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.

TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/SDK GUI.  For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality

  1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
    Image Removed
  2. Press 0 and enter for minimum setup
  3. (optional Win OS) Generate Virtual Drive or use short directory  for the reference design (for example x:\<design name>)
  4. Create Project
    1. Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
      Note: Select correct one, see TE Board Part Files
  5. Create HDF and export to prebuilt folder
    1. Run on Vivado TCL: TE::hw_build_design -export_prebuilt
      Note: Script generate design and export files into \prebuilt\hardware\<short dir>. Use GUI is the same, except file export to prebuilt folder
  6. Generate Programming Files with HSI/SDK
    1. Run on Vivado TCL: TE::sw_run_hsi
      Note: Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv"
    2. (alternative) Start SDK with Vivado GUI or start with TE Scripts on Vivado TCL: TE::sw_run_sdk
      Note: See SDK Projects
  7. Copy Application (hello_te0725.elf) into \firmware\microblaze_0\
  8. Regenerate Design:
    1. Run on Vivado TCL: TE::hw_build_design -export_prebuilt
      Note: App from Firmware folder will be add into BlockRAM. If you add other app, you must select *.elf manually on Vivado
    2. (alternative) Use SDK or Vivado to update generate Bitfile with new Application and regenerate mcs manually.

Launch

Programming

HTML
<!--
Description of Block Design, Constrains...
BD Pictures from Export...
  -->
Note

Check Module and Carrier TRMs for proper HW configuration before you try any design.

Xilinx documentation for programming and debugging: Vivado/SDK/SDSoC-Xilinx Software Programming and Debugging

QSPI

  1. Connect JTAG and power on PCB
  2. (if not done) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd" or open with "vivado_open_project_guimode.cmd", if generated.
  3. Type on Vivado Console: TE::pr_program_flash_mcsfile
    Note: Alternative use SDK or setup Flash on Vivado manually
  4. Reboot (if not done automatically)

SD

Not used on this Example.

JTAG

  1. Connect JTAG and power on PCB
  2. (if not done) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd" or open with "vivado_open_project_guimode.cmd", if generated.
  3. Open Vivado HW Manager
  4. Program Bitfile

Usage

  1. Prepare HW like described on section Programming
  2. Connect UART USB (most cases same as JTAG)
  3. Power On PCB (Do not restart, if you use Bitfile programming)

    Note: FPGA Loads Bitfile from Flash

UART

  1. Open Serial Console (e.g. putty)
    1. Speed: 9600
    2. COM Port: Win OS, see device manager, Linux OS see  dmesg |grep tty  (UART is *USB1)
  2. Uart Console:
    Hello TE0725 will run on endless loop.

System Design - Vivado

HTML
<!--
Description of Block Design, Constrains...
BD Pictures from Export...
  -->

Block Design

Image Removed

Constrains

Basic module constrains

Code Block
languageruby
title_i_bitgen_common.xdc
set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.CONFIGRATE 66 [current_design]
set_property CONFIG_VOLTAGE 1.8 [current_design]
set_property CFGBVS GND [current_design]
set_property BITSTREAM.CONFIG.SPI_32BIT_ADDR YES [current_design]
set_property BITSTREAM.CONFIG.SPI_BUSWIDTH 4 [current_design]
set_property BITSTREAM.CONFIG.M1PIN PULLNONE [current_design]
set_property BITSTREAM.CONFIG.M2PIN PULLNONE [current_design]
set_property BITSTREAM.CONFIG.M0PIN PULLNONE [current_design]

set_property BITSTREAM.CONFIG.USR_ACCESS TIMESTAMP [current_design]

Design specific constrain

Software Design - SDK/HSI

HTML
<!--
optional chapter
separate sections for different apps
  -->

For SDK project creation, follow instructions from:

SDK Projects

Application

hello_te0725

Hello World as endless loop.

Additional Software

HTML
<!--
Add Description for other Software, for example SI CLK Builder ...
 -->

No additional software is needed.

Appx. A: Change History and Legal Notices

Document Change History

To get content of older revision  got to "Change History"  of this page and select older document revision number.

HTML
<!--
Generate new entry:
1:add new row below first
2:Copy Page Information Macro(date+user) Preview, Page Information Macro Preview
3.Update Metadate =Page Information Macro Preview+1
  -->tables have all same width (web max 1200px and pdf full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
  width: 100% !important;
  max-width: 1200px !important;
 }
</style>


Page properties
hiddentrue
idComments

Important General Note:

  • Export PDF to download, if vivado revision is changed!

  • Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

    • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)
      • Figure template (note: inner scroll ignore/only only with drawIO object):

        Scroll Title
        anchorFigure_xyz
        titleText


        Scroll Ignore

        Create DrawIO object here: Attention if you copy from other page, use


        Scroll Only

        image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed



      • Table template:

        • Layout macro can be use for landscape of large tables
        • Set column width manually(can be used for small tables to fit over whole page) or leave empty (automatically)

      • Scroll Title
        anchorTable_xyz
        titleText

        Scroll Table Layout
        orientationportrait
        sortDirectionASC
        repeatTableHeadersdefault
        style
        widths
        sortByColumn1
        sortEnabledfalse
        cellHighlightingtrue

        ExampleComment
        12



  • ...


Scroll pdf ignore

Table of contents

Table of Contents
outlinetrue

Overview

Page properties
hiddentrue
idComments

Notes :


 MicroBlaze Design with Hello TE0725 example in endless loop.

Refer to http://trenz.org/te0725LP-info for the current online version of this manual and other available documentation.

Key Features

Page properties
hiddentrue
idComments

Notes :

  • Add basic key futures, which can be tested with the design


Excerpt
  • Vitis/Vivado 2019.2
  • MicroBlaze
  • QSPI
  • I2C
  • UART


Revision History

Page properties
hiddentrue
idComments

Notes :

  • add every update file on the download
  • add design changes on description


Scroll Title
anchorTable_DRH
titleDesign Revision History

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateVivadoProject BuiltAuthorsDescription
2020-04-202019.2TE0725LP-test_board_noprebuilt-vivado_2019.2-build_10_20200420093012.zip
TE0725LP-test_board-vivado_2019.2-build_10_20200420092959.zip
John Hartfiel
  • 2019.2 update
2019-11-192018.2TE0725LP-test_board_noprebuilt-vivado_2018.2-build_04_20191119080754.zip
TE0725LP-test_board-vivado_2018.2-build_04_20191119080742.zip
John Hartfiel
  • bugfix board part files clk settings
2018-08-162018.2TE0725LP-test_board-vivado_2018.2-build_02_20180816093341.zip
TE0725LP-test_board_noprebuilt-vivado_2018.2-build_02_20180816093354.zip
John Hartfiel
  • 2018.2 update
2018-03-192017.4TE0725LP-test_board-vivado_2017.4-build_07_20180319162005.zip
TE0725LP-test_board_noprebuilt-vivado_2017.4-build_07_20180319162259.zip
John Hartfiel
  • initial release


Release Notes and Know Issues

Page properties
hiddentrue
idComments
Notes :
  • add known Design issues and general notes for the current revision
  • do not delete known issue, add fixed version time stamp if  issue fixed


Scroll Title
anchorTable_KI
titleKnown Issues

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

IssuesDescriptionWorkaroundTo be fixed version
No known issues---------


Requirements

Software

Page properties
hiddentrue
idComments

Notes :

  • list of software which was used to generate the design


Scroll Title
anchorTable_SW
titleSoftware

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SoftwareVersionNote
Vitis2019.2needed, Vivado is included into Vitis installation


Hardware

Page properties
hiddentrue
idComments

Notes :

  • list of software which was used to generate the design

Basic description of TE Board Part Files is available on TE Board Part Files.

Complete List is available on <design name>/board_files/*_board_files.csv

Design supports following modules:

Scroll Title
anchorTable_HWM
titleHardware Modules

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Module ModelBoard Part Short NamePCB Revision SupportDDRQSPI FlashEMMCOthersNotes
TE0725LP-01-100-2C   100REV01    NA       32MB       NA         NA                3.3V Input Voltage     
TE0725LP-01-100-2D   100REV01    NA       32MB       NA         NA                1.8V Input Voltage     
TE0725LP-01-100-2L   100REV01    NA       32MB       NA         NA                1.8V Input Voltage     
TE0725LP-01-100-2I   100_2i        REV01    NA       32MB       NA         NA                1.8V Input Voltage     
TE0725LP-01-72C-1    100REV01    NA       32MB       NA         NA                3.3V Input Voltage     
TE0725LP-01-72C-1T   100REV01    NA       32MB       NA         NA                1.8V Input Voltage     
TE0725LP-01-72I-1T   100_2i        REV01    NA       32MB       NA         NA                1.8V Input Voltage     
TE0725LP-01-72C-1U   100REV01    NA       32MB       NA         NA                1.8V Input Voltage     
TE0725LP-01-72C-1H   100REV01    NA       32MB       NA         with hyperflash 3.3V Input Voltage     



Design supports following carriers:

Scroll Title
anchorTable_HWC
titleHardware Carrier

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Carrier ModelNotes
---



Additional HW Requirements:

Scroll Title
anchorTable_AHW
titleAdditional Hardware

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Additional HardwareNotes
TE0790 JTAG ProgrammerImportant: Depending on assembly version, it's not possible to supply module via TE0790. If it's possible, it's not recommended to use TE0790 for power supply( TE0790 TRM#PowerandPower-OnSequence)
External power supply3.3V or 1.8V depending on assembly variant


Content

Page properties
hiddentrue
idComments

Notes :

  • content of the zip file

For general structure and of the reference design, see Project Delivery - Xilinx devices

Design Sources

Scroll Title
anchorTable_DS
titleDesign sources

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

TypeLocationNotes
Vivado<design name>/block_design
<design name>/constraints
<design name>/ip_lib
Vivado Project will be generated by TE Scripts
Vitis<design name>/sw_libAdditional Software Template for Vitis and apps_list.csv with settings automatically for Vitis app generation


Additional Sources

Scroll Title
anchorTable_ADS
titleAdditional design sources

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

TypeLocationNotes
------


Prebuilt

Page properties
hiddentrue
idComments

Notes :

  • prebuilt files
  • Template Table:

    • Scroll Title
      anchorTable_PF
      titlePrebuilt files

      Scroll Table Layout
      orientationportrait
      sortDirectionASC
      repeatTableHeadersdefault
      style
      widths
      sortByColumn1
      sortEnabledfalse
      cellHighlightingtrue

      File

      File-Extension

      Description

      BIF-File*.bifFile with description to generate Bin-File
      BIN-File*.binFlash Configuration File with Boot-Image (Zynq-FPGAs)
      BIT-File*.bitFPGA (PL Part) Configuration File
      DebugProbes-File*.ltxDefinition File for Vivado/Vivado Labtools Debugging Interface

      Debian SD-Image

      *.img

      Debian Image for SD-Card

      Diverse Reports---Report files in different formats
      Hardware-Platform-Specification-Files*.xsaExported Vivado Hardware Specification for Vitis and PetaLinux
      LabTools Project-File*.lprVivado Labtools Project File

      MCS-File

      *.mcs

      Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

      MMI-File

      *.mmi

      File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)

      OS-Image*.ubImage with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk)
      Software-Application-File*.elfSoftware Application for Zynq or MicroBlaze Processor Systems

      SREC-File

      *.srec

      Converted Software Application for MicroBlaze Processor Systems




Scroll Title
anchorTable_PF
titlePrebuilt files (only on ZIP with prebult content)

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

File

File-Extension

Description

BIT-File*.bitFPGA (PL Part) Configuration File
DebugProbes-File*.ltxDefinition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports---Report files in different formats
Hardware-Platform-Specification-Files*.xsaExported Vivado Hardware Specification for Vitis and PetaLinux
LabTools Project-File*.lprVivado Labtools Project File

MCS-File

*.mcs

Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

MMI-File

*.mmi

File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)

Software-Application-File*.elfSoftware Application for Zynq or MicroBlaze Processor Systems


Download

Reference Design is only usable with the specified Vivado/Vitis/PetaLinux version. Do never use different Versions of Xilinx Software for the same Project.

Page properties
hiddentrue
idComments

Reference Design is available on:

Design Flow

Page properties
hiddentrue
idComments
Notes :
  • Basic Design Steps

  • Add/ Remove project specific description


Note

Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first lunch.

Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.

See also:

The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.

TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/SDK GUI.  For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality


  1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
    Image Added
  2. Press 0 and enter to start "Module Selection Guide"
  3. (optional Win OS) Generate Virtual Drive or use short directory  for the reference design (for example x:\<design name>)
  4. Create Project (follow instruction of the product selection guide), settings file will be configured automatically during this process)
    1. (optional for manual changes) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
      Note: Select correct one, see alsoTE Board Part Files
  5. Create XSA and export to prebuilt folder
    1. Run on Vivado TCL: TE::hw_build_design -export_prebuilt
      Note: Script generate design and export files into \prebuilt\hardware\<short dir>. Use GUI is the same, except file export to prebuilt folder
  6. Generate Programming Files with Vitis
    1. Run on Vivado TCL: TE::sw_run_vitis -all
      Note: Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv"
      App from Firmware folder will be add into BlockRAM. If you add other app, you must select *.elf manually on Vivado
    2. (alternative) Start SDK with Vivado GUI or start with TE Scripts on Vivado TCL: TE::sw_run_vitis
      Note:  TCL scripts generate also platform project, this must be done manuelly in case GUI is used. See Vitis
  7. Copy Application (hello_te0711.elf) into \firmware\microblaze_0\
  8. Regenerate Design:
    1. Run on Vivado TCL: TE::hw_build_design -export_prebuilt
      Note: App from Firmware folder will be add into BlockRAM. If you add other app, you must select *.elf manually on Vivado
    2. (alternative) Use SDK or Vivado to update generate Bitfile with new Application and regenerate mcs manually.

Launch

Page properties
hiddentrue
idComments

Note:

  • Programming and Startup procedure

Programming

Note

Check Module and Carrier TRMs for proper HW configuration before you try any design.

Xilinx documentation for programming and debugging: Vivado/SDK/SDSoC-Xilinx Software Programming and Debugging

Get prebuilt boot binaries

  1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell
  2. Press 0 and enter to start "Module Selection Guide"
    1. Select assembly version
    2. Validate selection
    3. Select Create and open delivery binary folder
      Note: Folder (<project foler>/_binaries_<Artikel Name>) with subfolder (boot_<app name>) for different applications will be generated

QSPI

  1. Connect JTAG and power on PCB
  2. (if not done) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd" or open with "vivado_open_project_guimode.cmd", if generated.
  3. Type on Vivado Console: TE::pr_program_flash
    Note: Alternative use SDK or setup Flash on Vivado manually
  4. Reboot (if not done automatically)


SD

Not used on this Example.

JTAG

  1. Connect JTAG and power on PCB
  2. (if not done) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd" or open with "vivado_open_project_guimode.cmd", if generated.
  3. Open Vivado HW Manager
  4. Program Bitfile

Usage

  1. Prepare HW like described on section Programming
  2. Connect UART USB (most cases same as JTAG)
  3. Power On PCB (Do not restart, if you use Bitfile programming)

    Note: FPGA Loads Bitfile from Flash

UART

  1. Open Serial Console (e.g. putty)
    1. Speed: 9600
    2. COM Port: Win OS, see device manager, Linux OS see  dmesg |grep tty  (UART is *USB1)
  2. Uart Console:
    Hello TE0725 will run on endless loop.

System Design - Vivado

Page properties
hiddentrue
idComments

Note:

  • Description of Block Design, Constrains... BD Pictures from Export...

Block Design

Image Added

Constrains

Basic module constrains

Code Block
languageruby
title_i_bitgen_common.xdc
set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.CONFIGRATE 66 [current_design]
set_property CONFIG_VOLTAGE 1.8 [current_design]
set_property CFGBVS GND [current_design]
set_property BITSTREAM.CONFIG.SPI_32BIT_ADDR YES [current_design]
set_property BITSTREAM.CONFIG.SPI_BUSWIDTH 4 [current_design]
set_property BITSTREAM.CONFIG.M1PIN PULLNONE [current_design]
set_property BITSTREAM.CONFIG.M2PIN PULLNONE [current_design]
set_property BITSTREAM.CONFIG.M0PIN PULLNONE [current_design]

set_property BITSTREAM.CONFIG.USR_ACCESS TIMESTAMP [current_design]

Design specific constrain


Software Design - Vitis

Page properties
hiddentrue
idComments
Note:
  • optional chapter separate

  • sections for different apps

For SDK project creation, follow instructions from:

Vitis

Application

Page properties
hiddentrue
idComments

----------------------------------------------------------

FPGA Example

scu

MCS Firmware to configure SI5338 and Reset System.

srec_spi_bootloader

TE modified 2019.2 SREC

Bootloader to load app or second bootloader from flash into DDR

Descriptions:

  • Modified Files: blconfig.h, bootloader.c
  • Changes:
    • Add some console outputs and changed bootloader read address.
    • Add bugfix for 2018.2 qspi flash

xilisf_v5_11

TE modified 2019.2 xilisf_v5_11

  • Changed default Flash type to 5.

----------------------------------------------------------

Zynq Example:

zynq_fsbl

TE modified 2019.2 FSBL

General:

  • Modified Files:main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)
  • Add Files: te_fsbl_hooks.h/.c(for hooks and board)\n\

  • General Changes: 
    • Display FSBL Banner and Device ID

Module Specific:

  • Add Files: all TE Files start with te_*
    • READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot  platform-top.h)
    • CPLD access
    • Read CPLD Firmware and SoC Type
    • Configure Marvell PHY

zynq_fsbl_flash

TE modified 2019.2 FSBL

General:

  • Modified Files: main.c
  • General Changes:
    •  Display FSBL Banner
    • Set FSBL Boot Mode to JTAG
    • Disable Memory initialisation

ZynqMP Example:

----------------------------------------------------------

zynqmp_fsbl

TE modified 2019.2 FSBL

General:

  • Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c(search for 'TE Mod' on source code)
  • Add Files:  te_xfsbl_hooks.h/.c (for hooks and board)\n\
  • General Changes: 
    • Display FSBL Banner and Device Name

Module Specific:

  • Add Files: all TE Files start with te_*
    • Si5338 Configuration
    • ETH+OTG Reset over MIO

zynqmp_fsbl_flash

TE modified 2019.2 FSBL

General:

  • Modified Files: xfsbl_initialisation.c, xfsbl_hw.h, xfsbl_handoff.c, xfsbl_main.c
  • General Changes:
    •  Display FSBL Banner
    • Set FSBL Boot Mode to JTAG
    • Disable Memory initialisation


zynqmp_pmufw

Xilinx default PMU firmware.

----------------------------------------------------------

General Example:

hello_te0820

Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. Vitis  is used to generate Boot.bin.

Template location: ./sw_lib/sw_apps/

hello_te0725

Hello TE0725 is a Xilinx Hello World example as endless loop instead of one console output.

Additional Software

Page properties
hiddentrue
idComments
Note:
  • Add description for other Software, for example SI CLK Builder ...
  • SI5338 and SI5345 also Link to:

No additional software is needed.

Appx. A: Change History and Legal Notices

Document Change History

To get content of older revision  got to "Change History"  of this page and select older document revision number.

Page properties
hiddentrue
idComments
  • Note this list must be only updated, if the document is online on public doc!
  • It's semi automatically, so do following
    • Add new row below first

    • Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

    • Metadata is only used of compatibility of older exports


Scroll Title
anchorTable_dch
titleDocument change history.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths2*,*,3*,4*
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateDocument Revision

Authors

Description

Page info
modified-date
modified-date
dateFormatyyyy-MM-dd

Page info
current-version
current-version
prefixv.

Page info
modified-user
modified-user

  • 2019.2 release
  • docu update
2019-11-19v.8John Hartfiel
  • bugfix board part files
2018-08-16v.6John Hartfiel
  • 2018.2 release

2018-06-05

v.5John Hartfiel
  • Typo correction UART Speed

2018-03-19

v.3John Hartfiel
  • 2017.4 release

All

Page info
modified-users
modified-users



Legal Notices

Include Page
IN:Legal Notices
IN:Legal Notices

...