Page History
...
- Intel Cyclone 10LP 10CL025 FPGA SoC, U1
- Winbond W9864G6JT 8 Mbyte SDRAM 166MHz, U2
- Intel EPCQ16ASI8N 2 MByte serial configuration memory, U5
- ST Microelectronics LIS3DH 3-axis accelerometer, U4
- FTDI USB2 to JTAG/UART adapter, U3
- Configuration EEPROM for FTDI chip, U9
- 12.0000 MHz oscillator, U7
- 8x red user LEDs, D2 ... D9
- Red LED (Conf. DONE), D10
- Green LED (indicating supply voltage), D1
- Push button (user), S2
- Push button (reset), S1
- Micro USB2 B socket (receptacle), J9
- 1x14 pin header (2.54mm pitch), J2
- 1x6 pin header (2.54mm pitch), J4
- 2x6 Pmod connector, J6
- 3-pin header (2.54mm pitch), J3
- 1x14 pin header (2.54mm pitch), J1
...
On-board serial configuration memory (U5) is provided by Intel EPCQ16ASI8N (EPCQ16SI8N in board revision TEI0003-02A) with 16 MBit (2 MByte) storage capacity. This non volatile memory is used to store initial FPGA configuration via JTAG interface. The memory is connected to FPGA bank 1 via active serial (AS) x1 interface.
...
Overview
Content Tools