Page History
...
- Samtec Razor Beam™ LSHM-150 B2B connector, JB1
- Samtec Razor Beam™ LSHM-150 B2B connector, JB3
- Samtec Razor Beam™ LSHM-130 B2B connector, JB2
- 6-pin header J26, for selecting PL I/O-bank voltage
- 6-pin header J5, for selecting PL I/O-bank voltage
- 6-pin header J6, for selecting PL I/O-bank voltage
- 6-pin header J27, for selecting PL I/O-bank voltage
- Micro USB2 Type B connector J12 J10 (Device or OTG mode)
- 2-pin VBAT header J7
- XMOD FTDI JTAG/UART header, JX1
- 4-bit DIP-switch S1
- User LED D1 (green)
- User LED D2 (red)
- 10-pin header soldering-pads J4, 6 I/O's available
- 16-pin header soldering-pads J3, JTAG/UART header ('XMOD FTDI JTAG Adapter'-compatible pin-assignment)SFP+ Connector, J1
- 50-pin header soldering-pads J17, for access to PL I/O-bank pins (42 I/O'S, 21 LVDS pairs)
- 50-pin header soldering-pads J20, for access to PL I/O-bank pins (42 I/O'S, 21 LVDS pairs)
- 16-pin header soldering-pads J3, JTAG/UART header ('XMOD FTDI JTAG Adapter'-compatible pin-assignment)
- 10-pin header soldering-pads J4, 6 I/O's availableSFP+ Connector, J1
Initial Delivery State
Board is shipped in following configuration:
...
| Scroll Title | ||||
|---|---|---|---|---|
| ||||
|
Document Change History
...
Date | Revision | Contributors | Description | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
| ||||||||||||||||||||||||||
| 2018-07-10 | v.78 | John Hartfiel |
| ||||||||||||||||||||||||||
| v.75 | Ali Naseri, Jan Kumann |
|
...
Overview
Content Tools