Page History
...
- _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
- Press 0 and enter for minimum setup
- (optional Win OS) Generate Virtual Drive or use short directory for the reference design (for example x:\<design name>)
- Create Project
- Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
Note: Select correct one, see TE Board Part Files
- Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
- Create HDF and export to prebuilt folder
- Run on Vivado TCL: TE::hw_build_design -export_prebuilt
Note: Script generate design and export files into \prebuilt\hardware\<short dir>. Use GUI is the same, except file export to prebuilt folder
- Run on Vivado TCL: TE::hw_build_design -export_prebuilt
- Generate Programming Files with HSI/SDK
- Run on Vivado TCL: TE::sw_run_hsi
Note: Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv" (alternative) Start SDK with Vivado GUI or start with TE Scripts on Vivado TCL: TE::sw_run_sdk
Note: See SDK ProjectsInfo TE0722 is without DDR, so special FSBL (sources on reference designs) is needed, see also: DDR less ZYNQ Design
- Run on Vivado TCL: TE::sw_run_hsi
Launch
Basic Information, see TE0722 Getting Started
...
Block Design
PS Interfaces
Type | Note |
---|---|
DDR | Disabled! |
QSPI | MIO |
SD | MIO |
UART0 | EMIO |
I2C1 | MIO |
GPIO | MIO |
SWDT0 | EMIO |
TTC0..1 | EMIO |
Constrains
Basic module constrains
...
Overview
Content Tools