Versions Compared

Old Version 22

changes.mady.by.user Pedram Babakhani

Saved on

compared with

New Version Current

changes.mady.by.user Antti Lukats

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Page properties
hiddentrue
idComments

Template Revision 2.6

  • Module: TRM Name always "TE Series Name" +TRM
    Example: "TE0728 TRM"
  • Carrier: TRM Name usually "TEB Series Name" +TRM
    Example: "TEB0728 TRM"

...

Page properties
hiddentrue
idComments

Important General Note:

  • If some section is configurable and depends on Firmware, please refer to the addition page (for example CPLD). If not available, add note, that this part is configurable

  • Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

    • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)

      • Figure template:

        Scroll Title
        anchorFigure_anchorname
        titleText


        Scroll Ignore

        Create DrawIO object here: Attention if you copy from other page, objects are only linked.


        Scroll Only

        image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed



      • Table template:

        • Layout macro can be use for landscape of large tables


      • Scroll Title
        anchorTable_tablename
        titleText

        Scroll Table Layout
        orientationportrait
        sortDirectionASC
        repeatTableHeadersdefaultstyle
        widthssortByColumn1
        sortEnabledfalse
        cellHighlightingtrue

        ExampleComment
        12



    • The anchors of the Scroll Title should be named consistant across TRMs. A incomplete list of examples is given below

      • <type>_<main section>_<name>

        • type: Figure, Table
        • main section:
          • "OV" for Overview
          • "SIP" for Signal Interfaces and Pins,
          • "OBP" for On board Peripherals,
          • "PWR" for Power and Power-On Sequence,
          • "B2B" for Board to Board Connector,
          • "TS" for Technical Specification
          • "VCP" for Variants Currently in Production
          •  "RH" for Revision History
        • name: custom, some fix names, see below
      • Fix names:

        • "Figure_OV_BD" for Block Diagram

        • "Figure_OV_MC" for Main Components

        • "Table_OV_IDS" for Initial Delivery State

        • "Table_PWR_PC" for Power Consumption

        • "Figure_PWR_PD" for Power Distribution
        • "Figure_PWR_PS" for Power Sequence
        • "Figure_PWR_PM" for Power Monitoring
        • "Table_PWR_PR" for Power Rails
        • "Table_PWR_BV" for Bank Voltages

        • "Table_TS_AMR" for Absolute_Maximum_Ratings

        • "Table_TS_ROC" for Recommended_Operating_Conditions

        • "Figure_TS_PD" for Physical_Dimensions
        • "Table_VCP_SO" for TE_Shop_Overview

        • "Table_RH_HRH" for Hardware_Revision_History

        • "Figure_RH_HRN" for Hardware_Revision_Number
        • "Table_RH_DCH" for Document_Change_History
    • Use Anchor in the document: add link macro and add "#<anchorname>
    • Refer to Anchror from external : <page url>#<pagename without space characters>-<anchorname>


...

Page properties
hiddentrue
idComments

Note for Download Link of the Scroll ignore macro:


Scroll Ignore

Download PDF version of this document.


Scroll pdf ignore

Table of Contents

Table of Contents

...

The Trenz Electronic TEI0015 is an a commercial-grade, low cost and small size module integrated with Intel® MAX 10.  Intel MAX 10 devices are the ideal solution for system management, I/O expansion, communication control planes, industrial, automotive, and consumer applications.

Refer to http://trenz.org/tei0015-info for the current online version of this manual and other available documentation.

Page properties
hiddentrue
idComments

Notes :

...

Page properties
hiddentrue
idComments

Note:
Use 'Key Features' description in shoping page, for example: https://shop.trenz-electronic.de/de/TE0728-04-1Q-SoC-Micromodul-mit-Xilinx-Automotive-Zynq-7020-512-MByte-DDR3L-6-x-6-cm

  • Intel® MAX 10 Commercial [10M08SAU169C8G]

    • Package: UBGA-169

      -UBGA

    • Speed Grade: C8 (Slowest)

    • Temperature:

       0°C ~ 85°C

       0°C to 85°C

    • Package compatible device 10M08...10M16 as assembly variant on request possible

  • SDRAM Memory up to

    64Mb, 166MHz

    32 Mbyte (8Mbyte default)

  • USB 2.0

    Dual High Speed USB to

    Multipurpose UART/FIFO IC

  • Quad SPI Flash, 64Mb
  • EEPROM Memory, 4Kb

  • 8x User LED 

  • USB port

  • (FT2232H)

    • 4 Kbit EEPROM Memory for FTDI configuration data
    • Micro USB Receptacle (communication and power)

  • SPI Flash - NOT INSTALLED (only special option)

  • 8x User LED 
  • 18 Bit 2MSPS 18 Bit Analog to Digital Converter

  • 2x SMA Female Connector

  • I/O interface: 23x GPIO - Arduino MKR compatible

  • Power Supply:

    5V

    Others

  • Dimension: 86.5mm x 25mm

    Dimension

  • Others:

    • 86m x 25m

    • Instrumentation Amplifier

    • Differential Amplifier

    • Voltage Feedback

    • Operational Amplifier

Block Diagram

Page properties
hiddentrue
idComments

add drawIO object here.

Note

For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .


...

Scroll Title
anchorFigure_OV_BD
titleTEI0015 block diagram


Scroll Ignore
lboxtrue
revision10
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
diagramNameTEI0015_OV_BD
simpleViewerfalse
width
linksauto
tbstylehidden
lboxtrue
diagramWidth642
641
revision27


Scroll Only


Main Components

...

Scroll Title
anchorFigure_OV_BD
titleTEI0015 main components


Scroll Ignore

draw.io Diagram
width
borderfalse
viewerToolbartrue
fitWindowfalsediagramDisplayName
lboxtrue
revision6
diagramNameTEI0015_OV_MC
diagramNameTEI0015_OV_MC
simpleViewerfalse
linksauto
tbstylehidden
lboxtrue
diagramWidth641
revision14


Scroll Only


  1. SMA Connector, J5...6

  2. Instrumentation

    Amplifier, U12 - U14 - U6

  3. Series

    Voltage Reference, U8

  4. Analog to Digital

    Convertor

    Converter, U15

    - U6

  5. Voltage Regulator, U10 - U13 - U16

  6. Buck

    Switching Voltage Regulator/LDO, U11 - U4

  7. SDRAM Memory, U2

  8. Intel® MAX 10 FPGA, U1SDRAM Memory, U2

  9. SPI Flash Memory, U5

  10. 12.00 MHz MEMS oscillator, U7

  11. FTDI USB2 to JTAG/UART adapter

    USP to UART convertor

    , U3

  12. User LEDs, D2...9

  13. 4Kb

    FTDI configuration EEPROM, U9

  14. Configuration/Status LED (Red) , D10

  15. Power-on LED (Green), D1

  16. Push button, S1

    Switch, S1

    ...2

  17. Micro USB

    port

    Connector, J9

  18. 1x14 pin header, J2 (Not assembled)

  19. 1x6 pin header, J4 (Not assembled)

  20. 1x4 Header, J3

    Pin Holder

    (Not assembled)

  21. 1x14 pin header, J1

    ...4

    (Not assembled)

Initial Delivery State

Page properties
hiddentrue
idComments

Notes :

Only components like EEPROM, QSPI flash and DDR3 can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

...

Scroll Title
anchorTable_OV_IDS
titleInitial delivery state of programmable devices on the module

Scroll Table Layout
widths
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SDRAM

Storage device name

Content

Notes

Quad SPI Flash

N/A

Not

Programmed

populated

I2C Configuration EEPROM

Programmed

FTDI configuration

Not Programmed


Configuration Signals

Page properties
hiddentrue
idComments
  • Overview of Boot Mode, Reset, Enables.

The FPGA configuration for Intel MAX 10 FPGAs can be stored through JTAG interface either in external configuration device (QSPI flash memory U5) or (using a *.POF file) on the FPGA itself since the Intel MAX 10 FPGA offers non-volatile configuration memory on chip. The FPGA configuration is loaded from the non-volatile memory when the board is powered up. To configure the FPGA directly, the JTAG interface can be used to configure the FPGA volatile (using a *.SOF file), means the configuration is lost after power off.

Reset process must be done FPGA Reconfigration can be triggered by pressing push button S1.

Scroll Title
anchorTable_OV_RST
titleReset process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal

Push ButtonPin HeaderNote

RESET

S1J2connected Connected to nCONFIG


Signals, Interfaces and Pins

...

Scroll Title
anchorTable_SIP_GIOs
titleGeneral I/Os to Pin Headers and connectors information

Scroll Table Layout
widths
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

FPGA BankConnector DesignatorI/O Signal CountVoltage LevelNotes
Bank 1AJ173.3VAIN0...6
Bank 1BJ453.3VJTAG interface
Bank 2J143.3VDIO2...5
Bank 5J293.3VDIO6...14
J123.3VDIO0...1
Bank 8J213.3VRESET


...

widths
Scroll Title
anchorTable_OBP_IOs
titleFPGA I/O Banks
Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style


sortByColumn1
sortEnabledfalse
cellHighlightingtrue
FPGA BankI/O Signal CountConnected toNotes
Bank 1A71x14 Pin header, J1AIN0...6
1Jumper, J3AIN7
Bank 1B51x6 Pin header, J4JTAG_EN, TDI, TDO, TMS, TCK
Bank 2


41x14 Pin header, J1D2...5
5A2D, U15ADC_EN, ADC_SDI, ADC_SDO, ADC_SCK, ADC_CNV
112MHz Oscillator, U7CLK12M
2Amplifier, U12nIAMP_A0, nIAMP_A1
Bank 322SDRAM, U2RAM_ADDR_CMD
Bank 59

1x14 Pin header, J2

DIO6...14
21x14 Pin header, J1DIO0...1
1D12_RDIO12
Bank 616SDRAM, U2DQ0...15
2SDRAM, U2DQM0...1
1D11_RDIO11
Bank 8



8User Red LEDs, D2...9LED0...7
6SPI Flash, U5F_CS, F_
CK
CKL, F_DI, F_DO, nSTATUS, DEVCLRn
1Red LED, D10CONF_DONE
6FTDI JTAG/UART Adapter, U3BDBUS0...5
1Push Button, S2USER_BTN

JTAG Interface


Micro-USB Connector

The Micro-USB connector J9 provides an interface to access the FIFO/UART and JTAG functions via FTDI FT2232 chip. The use of this feature requires that FTDI USB drivers are installed on your host PCJTAG access to the TEI0015 SoM through pin header connector J4.

Scroll Title
anchorTable_SIPOBP_JTGUSB
titleJTAG Micro USB-2 connector pins connection

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

JTAG Signal

Pin Header Connector

TMSJ4-6
TDIJ4-5
TDOJ4-4
TCK

J4-3

JTAG_ENJ4-2

On-board Peripherals

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs
Page properties
hiddentrue
idComments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection

...

anchorTable_OBP
titleOn board peripherals

...

PinsConnected toNote
VBUSUSB_VBUS
D+

FTDI FT2232H U3, DP pin


D-

FTDI FT2232H U3, DM pin



JTAG Interface

JTAG access to the TEI0015 SoM through pin header connector J4. This is normally not needed as there is on-board USB JTAG functionality.

Scroll Title
anchorTable_SIP_JTG
titleJTAG pins connection

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

JTAG Signal

Pin Header Connector

Note
TMSJ4-6
TDIJ4-5
TDOJ4-4
TCK

J4-3


JTAG_ENJ4-2Pulled-up to 3.3V


On-board Peripherals

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs


Page properties
hiddentrue
idComments

Notes :Minimum and Maximum density of quad SPI flash must be mentioned for other assembly options

.In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection


Scroll Title
anchorTable_OBP_SPI
titleQuad SPI interface MIOs and pinsOn board peripherals

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO PinSchematicU?? PinNotes

...

anchorTable_OBP_RTC
titleI2C interface MIOs and pins
Chip/InterfaceDesignatorNotes
77530153U2
FTDI FT2232HU3JTAG/UART/FIFO
SPI FlashU5
77530153U9
OscillatorU712 MHz clock source
77530153U12, U14Analog to Digital Converter
Push ButtonsS1...2
8x User LEDsD2...9Red LEDs


SDRAM

TEI0015 is equipped with a Winbond 64 MBit (8 MByte) SDRAM chip in standard configuration, variants with 256 Mbit (32 MByte) memory density are also available. The SDRAM chip is connected to the FPGA bank 3 and 6 via 16-bit memory interface with 166MHz clock frequency and CL3 CAS latency.

Page properties
hiddentrue
idComments

Notes :

Minimum and Maximum density of quad SPI flash must be mentioned for other assembly options.


...

anchorTable_OBP_I2C_RTC
titleI2C Address for RTC

...

Scroll Title
anchorTable_OBP_EEPSDRAM
titleI2C EEPROM SDRAM interface MIOs IOs and pins

Scroll Table Layout
style
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO PinSchematicU?? PinNotes
Scroll Title
anchorTable_OBP_I2C_EEPROM
titleI2C address for EEPROM
Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
stylewidths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue
MIO PinI2C AddressDesignatorNotes

LEDs

...

anchorTable_OBP_LED
titleOn-board LEDs
SDRAM I/O Signals

Signal Schematic Name

Connected toNotes
Address inputs

A0 ... A13

bank 3-
Bank address inputs

BA0 / BA1

bank 3

-
Data input/output

DQ0 ... DQ15

bank 6

-
Data mask

DQM0 ... DQM1

bank 6

-
ClockCLKbank 3-
Control Signals

CS

bank 3

Chip select

CKE

bank 3

Clock enable

RAS

bank 3

Row Address Strobe

CAS

bank 3

Column Address Strobe

WEbank 3Write Enable


FTDI FT2232H

The FTDI chip U3 converts signals from USB2 to a variety of standard serial and parallel interfaces. Refer to the FTDI data sheet to get information about the features of the FT2232H chip. FTDI FT2232H chip channel A is used in MPPSE mode for JTAG. Channel B is configured to be used in async FIFO mode, this is default mode when using preprogrammed FTDI configuration. In this mode the communication from host PC looks like normal UART but from the FTDI side it is 8 bit FIFO style interface.

The configuration of FTDI FT2232H chip is pre-programmed in the EEPROM U9.

...

DDR3 SDRAM

Page properties
hiddentrue
idComments

Notes :

Minimum and Maximum density of DDR3 SDRAM must be mentioned for other assembly options. (pay attention to supported address length for DDR3)

The TE???? SoM has ??? GByte volatile DDR3 SDRAM IC for storing user application code and data.

  • Part number: 
  • Supply voltage:
  • Speed: 
  • NOR Flash
  • Temperature: 

Ethernet

Scroll Title
anchorTable_OBP_ETHFTDI
titleEthernet PHY to Zynq SoC connectionsFTDI chip interfaces and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Bank
FTDI Chip U3 PinSignal Schematic Name
ETH1
Connected to
ETH2
Notes
Signal Description
ADBUS0

CAN Transceiver

...

anchorTable_OBP_CAN
titleCAN Tranciever interface MIOs

...

anchorTable_OBP_CLK
titleOsillators

...

Power and Power-On Sequence

...

hiddentrue
idComments

In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

  • Power on-sequence
  • Power distribution
  • Voltage monitoring circuit
Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

Power Supply

Power supply with minimum current capability of xx A for system startup is recommended.

Power Consumption

...

anchorTable_PWR_PC
titlePower Consumption

...

* TBD - To Be Determined

Power Distribution Dependencies

...

anchorFigure_PWR_PD
titlePower Distribution
Scroll Ignore

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

TCKFPGA bank 1B, pin G2JTAG interface
ADBUS1TDIFPGA bank 1B, pin F5
ADBUS2TDOFPGA bank 1B, pin F6
ADBUS3TMS

FPGA bank 1B, pin G1

BDBUS0BDBUS0FPGA bank 8, pin A4User configurable
BDBUS1BDBUS1FPGA bank 8, pin B4User configurable
BDBUS2BDBUS2FPGA bank 8, pin B5User configurable
BDBUS3BDBUS3FPGA bank 8, pin A6User configurable
BDBUS4BDBUS4FPGA bank 8, pin B6User configurable
BDBUS5BDBUS5FPGA bank 8, pin A7User configurable
BDBUS6BDBUS6FPGA bank 6, pin C11
BDBUS7BDBUS7FPGA bank 3, pin J7
BCBUS0BCBUS0FPGA bank 5, pin J9
BCBUS1BCBUS1FPGA bank 3, pin K5
BCBUS2BCBUS2FPGA bank 3, pin L4
BCBUS3BCBUS3FPGA bank 3, pin L5
BCBUS4BCBUS4FPGA bank 3, pin N12


SPI Flash

Optional SPI flash device maybe assembled in custom variants, normally it is not populated.

Scroll Title
anchorTable_OBP_QSPI
titleQuad SPI Flash memory interface

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal Schematic NameConnected toNotes
F_CSFPGA bank 8, pin B3Chip select
F_CLKFPGA bank 8, pin A3Clock
F_DIFPGA bank 8, pin A2Data in / out
nSTATUS

FPGA bank 8, pin C4

Data in / out, configuration dual-purpose pin of FPGA
DEVCLRNFPGA bank 8, pin B9Data in / out, configuration dual-purpose pin of FPGA
F_DOFPGA bank 8, pin B2Data in / out


EEPROM

The configuration of FTDI FT2232H chip is pre-programmed in the EEPROM U9.

Scroll Title
anchorTable_OBP_EEP
titleI2C EEPROM interface MIOs and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SchematicConnected toNotes

EECS

FTDI U3, Pin EECS
EECLKFTDI U3, Pin EECLK
EEDATAFTDI U3, Pin EEDATA


ADC

The TEI0015 board is equipped with the Analog Devices AD4003BCPZ-RL7 18-bit 2MSPS ADC.

Scroll Title
anchorTable_OBP_A2D
titleA2D converter interface and pins

scroll-

Power-On Sequence

...

anchorFigure_PWR_PS
titlePower Sequency
Scroll Ignore

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Voltage Monitor Circuit

...

anchorFigure_PWR_VMC
titleVoltage Monitor Circuit
Scroll Ignore

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Power Rails

Scroll Title
anchorTable_PWR_PR
titleModule power rails.

scroll-tablelayout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumnsortByColumn1
sortEnabledfalse
cellHighlightingtrue

Power Rail Name

B2B Connector

JM1 Pin

B2B Connector

JM2 Pin

B2B Connector

JM3 Pin

DirectionNotes

Bank Voltages

PinsConnected toNotes

IN+

Diff Amplifier U14, VOUT-
IN-Diff Amplifier U14, VOUT+
SDIFPGA, bank 2, pin M2, ADC_SDI
SDOFPGA, bank 2, pin M1,  ADC_SDO
SCKFPGA, bank 2, pin N3,  ADC_SCK
CNVFPGA, bank 2, pin N2, ADC_CNV


LEDs

Scroll Title
anchorTable_OBP_LED
titleOn-board LEDs

Scroll Table Layout
orientation

Scroll Title
anchorTable_PWR_BV
titleZynq SoC bank voltages.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Bank          
Designator
Schematic Name
Color
Voltage
Connected to
Notes

...

hiddentrue
idComments

...

Active LevelNote
D2...9RedLED1...8Active HighUser LEDs
D10RedCONF_DONEActive LowConfiguration DONE LED
D1Green3.3V Active HighAfter power on it will be on.


Push Bottuns

Scroll Title
anchorTable_OBP_LED
titleOn-board Push Buttons

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorConnected toFunctionalityNote
S1RESETGeneral reset
S2USER_BTNUser push buttonConnected to FPGA Bank 8.


Clock Sources

Scroll Title
anchorTable_OBP_CLK
titleOsillators

use "include page" macro and link to the general B2B connector page of the module series,

...

? x ? modules use two or three Samtec Micro Tiger Eye Connector on the bottom side.

  • 3 x REF-??????? (compatible to ????????), (?? pins, ?? per row)

    Operating Temperature: -??°C ~ ??°C
    Current Rating: ??A per ContactNumber of Positions: ??
    Number of Rows: ??

Technical Specifications

Absolute Maximum Ratings

Scroll Title
anchorTable_TS_AMR
titlePS absolute maximum ratings

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Symbols
Clock Source
Description
Schematic Name
MinMaxUnitVVVVVVVV

Recommended Operating Conditions

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

FrequencyNote
MEMS Oscillator, U7CLK12M12.00 MHz

Connected to FTDI FT2232 U3, pin 3.

Connected to FPGA SoC bank 2, pin H6.


Power and Power-On Sequence

Page properties
hiddentrue
idComments

In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

  • Power on-sequence
  • Power distribution
  • Voltage monitoring circuit


Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .


Power Supply

The module is power supplied from USB (optionally via unpopulated pin header).

Power Consumption

scroll-scroll-title
anchorTable_TSPWR_ROCPC
titleRecommended operating conditions.Power Consumption

Scroll Table Layout
style
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Parameter
FPGA
MinMaxUnitsReference DocumentVSee ???? datasheets.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.°CSee Xilinx ???? datasheet.°CSee Xilinx ???? datasheet.

Physical Dimensions

  • Module size: ?? mm × ?? mm.  Please download the assembly diagram for exact numbers.

  • Mating height with standard connectors: ? mm.

PCB thickness: ?? mm.

...

hiddentrue
idComments

In 'Physical Dimension' section, top and button view of moduloe must be insterted, information regarding physical dimention can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part)for every SoM.

For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

Typical Current
Intel MAX 10 10M08 FPGATBD*


* TBD - To Be Determined

Actual power consumption depends on the FPGA design and ambient temperature.

Power Distribution Dependencies

Scroll Title
anchorFigure_PWR_PD
titlePower Distribution


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramNameTEI0015_PWR_PD
simpleViewerfalse
linksauto
tbstylehidden
diagramDisplayNameTEI0015_PWR_P
lboxtrue
diagramWidth638
revision12


Scroll Only

Image Added


Power-On Sequence

There is no specific or special power-on sequence, just one single power source is needed. After power on the green LED (D1) will be on.

Power Rails

Scroll Title
anchorTable_PWR_PR
titleModule power rails.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue


Power Rail Name

Connector

J2 Pin

Connector

J9 Pin

DirectionNotes
VINJ2-13-Input5 V - Pin Header
3.3VJ2-12-Output
5VJ2-14-Output

USB_VBUS

-J9-1Input5 V - USB Connector


Bank Voltages

Scroll Title
anchorTable_PWR_BV
titleIntel MAX 10 SoC bank voltages.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Bank          

Schematic Name

Voltage

Notes
Bank 1AVCCIO1A3.3V
Bank 1B

VCCIO1B

3.3V
Bank 2VCCIO23.3V
Bank 3VCCIO33.3V
Bank 5VCCIO53.3V
Bank 6VCCIO63.3V


Bank 8VCCIO83.3V



Technical Specifications

Absolute Maximum Ratings

Scroll Title
anchorTable_TS_AMR
titleAbsolute maximum ratings

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SymbolsDescriptionMinMaxUnitReference Document

VIN 

Supply voltage4.755.25V
CH1-, CH1+Analog input voltage on amplifier U12 pin 1, 10-3030VAD8251 datasheet

T_STG

Storage Temperature-25+85°C


Recommended Operating Conditions

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

Scroll Title
anchorTable_TS_ROC
titleRecommended operating conditions.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SymbolsMinMaxUnitReference Document

VIN supply voltage (5.0V nominal)

4.755.25V
Analog input voltage on amplifier U12 pin 1 (CH1-), 10 (CH1+)-1010VAD8251 datasheet

T_OP

0+70°CW9864G6JT-6 datasheet


Physical Dimensions

Module size: 25 mm × 86.5 mm.  Please download the assembly diagram for exact numbers.

PCB thickness: 1.22 mm.

Page properties
hiddentrue
idComments

In 'Physical Dimension' section, top and button view of moduloe must be insterted, information regarding physical dimention can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part)for every SoM.

For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .



Scroll Title
anchorFigure_TS_PD
titlePhysical Dimension


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramNameTEI0015_TS_PD
simpleViewerfalse
linksauto
tbstylehidden
lboxtrue
diagramWidth641
revision1


Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

Image Added


Currently Offered Variants 

Page properties
hiddentrue
idComments

Set correct link to the shop page overview table of the product on English and German.

Example for TE0728:

ENG Page: https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

DEU Page: https://shop.trenz-electronic.de/de/Produkte/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

if not available, set.


Scroll Title
anchorTable_VCP_SO
titleTrenz Electronic Shop Overview

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Trenz shop TEI0015 overview page
English pageGerman page


Revision History

Hardware Revision History

Scroll Title
anchorTable_RH_HRH
titleHardware Revision History

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateRevisionChangesDocumentation Link
2019-02-1101-REV01


Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

Scroll Title
anchorFigure_RV_HRN
titleBoard hardware revision number.


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramNameTEI0015_RH_RHN
simpleViewerfalse
linksauto
tbstylehidden
lboxtrue
diagramWidth158
revision2


Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

Image Added


...

anchorFigure_TS_PD
titlePhysical Dimension
Scroll Ignore

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Currently Offered Variants 

Page properties
hiddentrue
idComments

Set correct link to the shop page overview table of the product on English and German.

Example for TE0728:

ENG Page: https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

DEU Page: https://shop.trenz-electronic.de/de/Produkte/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

if not available, set.

...

anchorTable_VCP_SO
titleTrenz Electronic Shop Overview

...

Revision History

Hardware Revision History

List of online PCN ...Link

...

anchorTable_RH_HRH
titleHardware Revision History

...

Document Change History

Page properties
hiddentrue
idComments
  • Note this list must be only updated, if the document is online on public doc!
  • It's semi automatically, so do following

    • Add new row below first

    • Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

    • Metadata is only used of compatibility of older exports

...

Scroll Title
anchorTable_RH_DCH
titleDocument change history.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateRevisionContributorDescription

Page info
infoTypeModified date
dateFormatyyyy-MM-dd
typeFlat

Page info
infoTypeCurrent version
prefixv.
typeFlat
showVersionsfalse

Page info
infoTypeModified by
typeFlat
showVersionsfalse

change list

  • multiple sections updated

2020-02-04

v.98ED

  • Technical Specifications updated

  • Power Rails updated

--

all

Page info
infoTypeModified users
typeFlat
showVersionsfalse

  • --


...