Page History
...
- Execute "create_project_win.cmd" or "create_project_linux.sh"
- Select your board in "Board selection" section
- Click on "Create project" button
...
- General steps:
1. Connect your Hardware-Modul to the PC via JTAG
2. Open " create_project_win.cmd/create_project_linux.sh
3. Select correct board in "Board selection" area
4. Click on "Program device" button → The "Program device" window opens. - Program with prebuilt files: (download reference design with prebuilt files is required)
4. Select "Program prebuilt file"
5. Click on "Start program device" button - Program with own generated files:
6. Select "Program other file"
7. Click on "Browse ..." to choose path to your own generated file (supported file types: *.jic, *.pof, *.sof, *.elf)
8. Click on "Start program device" button - Program device via Quartus Programmer:
9. Click on "Open quartus programmer"
10. Select from Programmer top menu: Edit → Hardware Setup, select "Arrow-USB-Blaster [USB0]*" and close window
11. Click on "Add File..." and choose correct programming file
12. Enable "Program/Configure" checkbox and click on "Start" to program the device with the selected programming file
...
| Name | Description | Value | |||
|---|---|---|---|---|---|
| ID | ID to identify the board variant of the module series, used in TE-Scripts | Number, should be unique in csv list | |||
| PRODID | Product ID | Product Name | |||
| FAMILY | FPGA family, used in Quartus and TE-Scripts | device family, which is available in Quartus, ex. MAX 10 | |||
| DEVICE | FPGA device, used in Quartus and TE-Scripts | device, which is available in Quartus, ex. 10M08SAU169C8G | |||
| SHORTNAME | Subdirectory name, used for multi board projects to get correct sources and save prebuilt data | name to save prebuilt files or search for sources | |||
| FLASHTYP | Flash typ used for programming Devices via Quartus/LabTools | "<Flash Name from Quartus>|<SPI Interface>" or "NA" , NA is not defined | |||
| FLASH_SIZE | Size of Module Flash | use MB, for ex. "64MB" or "NA" if not available | |||
| DDR_DEV | DDR Module | DDR module name | |||
| DDR_SIZE | Size of Module DDR | use GB or MB, for ex. "2GB" or "512MB" or "NA" if not available | |||
| PCB_REV | Supported PCB Revision | "<supported PCB Revision>|<supported PCB Revision>", for ex. "REV02" or "REV03|REV02" | PCB_SIZE | Size of PCB | form factor in cm |
| NOTES | Additional notes |
SDC Conventions
...
Overview
Content Tools