Page History
...
The user can easily access the pre-amplification and the length of the processed and plotted part of the data
through a GUI.
Communicating with module:
To communicate with the module, a serial comport port with a speed set to 115200 bits needs to be opened.
Commands consists of a single character in UTF-8 encoding.
It is good practice to communication with the module following these steps:
...
These steps apply also for read operations.
Using the ADC for high speed consecutive measurements
The module provides a method to gather highly accurate consecutive ADC measurements in a single event.
In this mode of operation, one mega sample of ADC values are performed and stored inside the modules
SD-RAM.
...
Information to convert the RAW ADC data into standard integer values.
Module TEI0015 - AD4003BCPZ-RL7
Resolution: 18-bit / 5 nibbles
Maximum sampling rate: 2 MSPS
...
The layout of the ADC circuit is further described in the Analog Devices circuit note CN-0385.
Module TEI0016 - ADAQ7988 / ADAQ7980
Resolution: 16-bit / 4 nibbles
Maximum sampling rate: 0.5 MSps / 1 MSps
...