Table of Content
Requirements
The Data Capture Demo requires that the modules:
- FTDI chips Port B is in OPTO isolated mode
- the FPGA Intel MAX 10 is programmed with the demo specific firmware
If the module is in initial delivery condition, FTDI chip Port B is set to 245 FIFO and different Firmware,
boot requirements are not meet, so all steps on this wiki page need to be taken.
Download
...
Compressed folder, containing all necessary files for the demo , must de uncompressed - Download-Link
Software which The compressed folder needs to be installed prior to configure the module.
For changing the FTDI configuration:
...
For programming the FPGA Intel MAX 10:
...
extracted, so that the contend can be used inside other programs.
The demo itself requires the installation of Visual Analog (Version 1.9.48.1) - Download Link
The compressed folder needs to be extracted, so that they can be used inside other programs.
Arrow-USB-Blaster and Quartus prime need to be installed to update the firmware,
Visual Analog for running the demo.
FTDI Port B OPTO isolated mode
Conect the module to your PC and open FT_Prog.
...
...
Scroll Only |
---|
Image Removed |
Press "Devices → Scan and parse" the modules FTDI chips configuration will be listed.
Use the "Device Tree" to navigate to "Device: ... → FT EEPROM → Hardware specific → Hardware"
and change the value to OPTO isolated.
...
...
Scroll Only |
---|
Image Removed |
Press "Devices → Program", a new window appears, press program and after this finishes press Cycle ports.
...
...
Scroll Only |
---|
Image Removed |
Excerpt |
---|
Setting up Visual Analog and running the data capture demo- Determine the modules
|
The configuration is finished, FT_Prog can be closed.
FPGA demo specific firmware
To update the firmware to the demo specific one, open Quartus prime programmer.
In the windows startmenu search for Intel FPGA 18.1. ... Lite Edition and open programmer.
...
...
Scroll Only |
---|
Image Removed |
...
...
Scroll Only |
---|
Image Removed |
...
...
Scroll Only |
---|
Image Removed |
Mark the "Program/Configure" box for the selected file. The programming of the FPGA is executed, when you press the button "Start".
When the programming finishes, the Quartus Prime Programmer can be closed.
Integration with Visual Analog
...
- COM port number
- Open the device manager, right click onto windows start menu symbol and select device manager
Open ports and identify the port used by the module, the number is here marked with an X Scroll Title |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | true |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | true |
---|
revision | 5 |
---|
diagramName | TEI0015_data_capture-demo_Visual-Analog_device-manager |
---|
simpleViewer | true |
---|
width | 400 |
---|
links | auto |
---|
tbstyle | top |
---|
diagramWidth | 542 |
---|
|
|
Scroll Only |
---|
Image Modified |
|
- Setup Visual Analog
Start Visual Analog and open a Blank canvas Scroll Title |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | true |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | true |
---|
revision | 2 |
---|
diagramName | TEI0015_data_capture-demo_Visual-Analog_open |
---|
simpleViewer | true |
---|
width | 400 |
---|
links | auto |
---|
tbstyle | top |
---|
diagramWidth | 575 |
---|
|
|
Scroll Only |
---|
Image Modified |
|
Via File → Open point to the file AnalogMAX_DAQ1_Capture.vac from the demo folder.
Scroll Title |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | true |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | true |
---|
revision | 2 |
---|
diagramName | TEI0015_data_capture-demo_Visual-Analog_blanc-canvas |
---|
simpleViewer | true |
---|
width | 400 |
---|
links | auto |
---|
tbstyle | top |
---|
diagramWidth | 643 |
---|
|
|
Scroll Only |
---|
Image Modified |
|
Press Tools → External Tools... to prepare the usage of adcapture.exe, in the new appearing window Scroll Title |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | true |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | true |
---|
revision | 2 |
---|
diagramName | TEI0015_data_capture-demo_Visual-Analog_Capture.vac |
---|
simpleViewer | true |
---|
width | 600 |
---|
links | auto |
---|
tbstyle | top |
---|
diagramWidth | 636 |
---|
|
|
Scroll Only |
---|
Image Modified |
|
Click Add in the new opened window and insert the name "adcapture" in the Display Text. Click Browse... and select the file "adcapture.exe" from the downloaded demo. Into Arguments insert "COMX,115200 1024 c:\temp\capture.txt
|
...
1", where the X in COMX is a placeholder for your comport number. To finish the setup press OK. Scroll Title |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | true |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | true |
---|
revision |
---|
|
|
|
|
...
5 | diagramName | TEI0015_data_capture-demo_Visual-Analog_adcapture-setup |
---|
simpleViewer | true |
---|
width | 400 |
---|
links | auto |
---|
tbstyle | top |
---|
diagramWidth | 445 |
---|
|
|
Scroll Only |
---|
Image Modified |
|
Parameter description: COM14 - COM port which is used for the connection. 115200 - Baud rate which is used for the connection. 1024 - Amount of K samples to read, minimum 64 and maximum is 1024. c:\temp\capture.txt - File name and path which specifies where to storage the data.
|
...
1 - Command to adjust for the modules gain, possible values are: TEI0015 and TEI0016: 1 for a gain of 1, 2 for a gain of 2, 4 for a gain of 4 and 8 for a gain of 8 TEI0023: 1 for a gain of 0.25, 2 for a gain of 0.5, 3 for a gain of 1, 4 for a gain of 2, 5 for a gain of 4, 6 for a gain of
|
...
...
of 16
Befor running the demo, in Visual Analog, fill into the Pattern Loader the ADC sampling rate of your module: TEI0015 - 2 MHz / Resolution - 18 bit TEI0016-0x-08-C8A - 0.5 MHz / Resolution - 16 bit TEI0016-0x-08-C8B - 1 MHz / Resolution - 16 bit TEI0023 - 2 MHz / Resolution - 18 bit
This sampling rate is only changed, when the demo has been run.
It is often necessary to fill in the value two times before it is recognized. In dependency to the language settings, 0.5 MHz is sometimes not recognized, try instead of the separation point (0.5) a separation comma (0,5) or without the zero (.5 ,5) In the graph section, one can check the present sampling rate - In addition, the ADC resolution needs to be adjusted also. In the Input Formatter Box, press onto
the small Button, and adjust in the new appearing window the resolution.
Scroll Title |
---|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | true |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | true |
---|
revision | 3 |
---|
diagramName | TEI0015_data_capture-demo_Visual-Analog_Samplingrate |
---|
simpleViewer | true |
---|
width | 400 |
---|
links | auto |
---|
tbstyle | top |
---|
diagramWidth | 904 |
---|
|
|
Scroll Only |
---|
Image Added |
|
- Launch adcapture
- To run the demo, select the above inserted tool by selecting Tools → adcapture, a new window opens
The window shows the activity of the tool "adcapture", the picture below shows
|
...
it, when it is finished Scroll Title |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | true |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | true |
---|
revision | 3 |
---|
diagramName | TEI0015_data_capture-demo_Visual-Analog_adcapture-run |
---|
simpleViewer | true |
---|
width | 600 |
---|
links | auto |
---|
tbstyle | top |
---|
diagramWidth | 746 |
---|
|
|
Scroll Only |
---|
Image Modified |
|
In Visual Analog, use "F5" or press Canvas → Run to update the screen Scroll Title |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | true |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | true |
---|
revision | 1 |
---|
diagramName | TEI0015_data_capture-demo_Visual-Analog_window-demo-run |
---|
simpleViewer | true |
---|
width | 600 |
---|
links | auto |
---|
tbstyle | top |
---|
diagramWidth | 1921 |
---|
|
|
Scroll Only |
---|
Image Modified |
|
Quick test with a terminal program- Figure out the correct COM port number for the AnalogMAX DAQ1 board
- Open the device manager.
Open ports and identify the port used by the AnalogMAX DAQ1 as visible in Figure 10.
- Open terminal and set the parameters (example use for putty).
- Set the connection type to Serial.
- Set the "Serial line" to your above found COM port.
- Set the "Speed" to 115200.
- Use "Open" to start the connection.
- Type following character for the appropriate usage.
- "?" to get the ID (AnalogMAX DAQ1 will return "1", DAQ2 will return "2")
- "t" to trigger ADC capture into the memory - 1M samples.
- "." to get one ADC sample.
- "+" to get 128 samples.
- "*" to get 16*1024 samples.
|