Page History

...

"1"   Sets the pre-amplification of the ADC's input to 1. Firmware dependenddependent

"2"   Sets the pre-amplification of the ADC's input to 2. Firmware dependenddependent

"4"   Sets the pre-amplification of the ADC's input to 4. Firmware dependenddependent

"8"   Sets the pre-amplification of the ADC's input to 8. Firmware dependenddependent

"r"    The ADC measure once and transmits this value

...

"."     A single value of stored ADC measurment measurement is transmitted

"+"   128 values of stored ADC measurements are transmitted

...

"?"   The module returns its ID:
               TEI0015 with ADC AD4003 / 2 MSps returns "1"
               TEI0016 with ADC ADAQ7988 / 0.5 MSps returns "2"
               TEI0016 with ADC ADAQ7980 / 1 MSps returns "2"

"F"   The module activates a square wave signal,
        frequency = 10 kHz and  amplitude is ~ +3,3 V / ground
        The signal is accessible on the pads
               - D5 in normal mode and
               - D6 in time inverted mode

"f"   Deactivation of the square wave signal