Page History
This demo provides an example on how to use the communication interface provided in the modules firmware
to setup the pre-amplification and trigger an ADC measurement. This measurement is converted to show
its value over time, and Fourier transformed, showing its frequency spectrum.
The download of the demo contains the demo in a separate folder and the FPGA Design file.
The demo consist of two files, one is the notebook which contains the GUI and the other is a code module,
containing the functional part of the demo. These files must be in the same folder when running the demo.
The modules adc ADC is controlled via the Intel Max 10 FPGA. In shipment condition, the FPGA is programmed with
the necessary FPGA Design to run this demo.
...
When this demo runs, it displays a graphical user interface, setup the comport and , the demo automatically selects
the module first.
After this, the demo and the module can communicate.
...
One can set up a pre amplification gain of the input signal and the amount of samples to be processed.
By pressing the button Capture FFT data, the input signal will be plotted and shown.
...
Overview
Content Tools