Page History
...
When this demo runs, it displays a graphical user interface, setup the comport, the demo automatically selects
the module. After this, the demo and the module can communicate.
The module offers a Non inverted input and an inverted input. The inputs is accessible through either
a SMA connection or a breakout connection.
Inverted inputs are J5 and -J8
Non inverted inputs are J6 and +J8
Now supply a signal to the inputs (via SMA jack or connector J8).
An other option is to use the modules square wave signal output. Connect the digital outputs D5 and D6 to
the input trough a resistor of at least 1 kilo Ohm and activate the signal through the checkbox.
Be careful, do not shorten the outputs D5 or D6 to ground.
...
Overview
Content Tools