Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Custom_table_size_100

Page properties
hiddentrue
idComments

Template Revision 2.

...

15

  • Module: TRM Name always "TE Series Name" +TRM
    Example: "TE0728 TRM"
  • Carrier: TRM Name usually "TEB Series Name" +TRM
    Example: "TEB0728 TRM"

...

Template Change history:

  • 2.14 to 2.15
    • add excerpt macro to key features
  • 2.13 to 2.14
    • add fix table of content
    • add table size as macro
  • 2.12 to 2.13
    • Changed controller Signals section


Page properties
hiddentrue
idComments

Important General Note:

  • If some section is configurable and depends on Firmware, please refer to the addition page (for example CPLD). If not available, add note, that this part is configurable
  • Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

    • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)
      • Figure template:

        Scroll Title
        anchorFigure_anchorname
        titleText


        Scroll Ignore

        Create DrawIO object here: Attention if you copy from other page, objects are only linked.


        Scroll Only

        image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed



      • Table template:

        • Layout macro can be use for landscape of large tables

      • Scroll Title
        anchorTable_tablename
        titleText

        Scroll Table Layout
        orientationportrait
        sortDirectionASC
        repeatTableHeadersdefault
        style
        widths
        sortByColumn1
        sortEnabledfalse
        cellHighlightingtrue

        ExampleComment
        12



    • The anchors of the Scroll Title should be named consistant across TRMs. A incomplete list of examples is given below

      • <type>_<main section>_<name>

        • type: Figure, Table
        • main section:
          • "OV" for Overview
          • "SIP" for Signal Interfaces and Pins,
          • "OBP" for On board Peripherals,
          • "PWR" for Power and Power-On Sequence,
          • "B2B" for Board to Board Connector,
          • "TS" for Technical Specification
          • "VCP" for Variants Currently in Production
          •  "RH" for Revision History
        • name: custom, some fix names, see below
      • Fix names:
        • "Figure_OV_BD" for Block Diagram

        • "Figure_OV_MC" for Main Components

        • "Table_OV_IDS" for Initial Delivery State

        • "Table_PWR_PC" for Power Consumption

        • "Figure_PWR_PD" for Power Distribution
        • "Figure_PWR_PS" for Power Sequence
        • "Figure_PWR_PM" for Power Monitoring
        • "Table_PWR_PR" for Power Rails
        • "Table_PWR_BV" for Bank Voltages
        • "Table_TS_AMR" for Absolute_Maximum_Ratings

        • "Table_TS_ROC" for Recommended_Operating_Conditions

        • "Figure_TS_PD" for Physical_Dimensions
        • "Table_VCP_SO" for TE_Shop_Overview
        • "Table_RH_HRH" for Hardware_Revision_History

        • "Figure_RH_HRN" for Hardware_Revision_Number
        • "Table_RH_DCH" for Document_Change_History
    • Use Anchor in the document: add link macro and add "#<anchorname>
    • Refer to Anchror from external : <page url>#<pagename without space characters>-<anchorname>



Page properties
hiddentrue
idComments

-----------------------------------------------------------------------


Page properties
hiddentrue
idComments

Note for Download Link of the Scroll ignore macro:


Scroll Ignore

Download

...

...


Table of Contents

Overview

The Trenz Electronic TEB0835 is a carrier for TE0835 module which is based on Xilinx UltraScale+ RFSoC.

...

The Carrier is equipped with a Micro SD card reader, Micro USB2.0, 21x UMCC connectors and 6x SMA connectors for clocks and ADC/DAC inputs/outputs , 6x Green User LEDs, Reset Push Button, DIP Switch for Mode, Battery Holder, FT2232H FTDI,  programmable clock generators and a Temperature sensor IC. The carrier provides PCIe connector as well.

Refer

...

to http://trenz.org/teb0835-info for the current online version of this manual and other available documentation.

Page properties
hiddentrue
idComments

Notes :

Key Features

Page properties
hiddentrue
idComments

Note:
 'description: Important components and connector or other Features of the module
→ please sort and indicate assembly options

Key Features'  must be split into 6 main groups for modules and mainboards:

  • SoC/FPGA
    • Package: SFVC784
    • Device: ZU2...ZU5*
    • Engine: CG, EG, EV*
    • Speed: -1LI, -2LE,*, **
    • Temperature: I, E,*, **
  • RAM/Storage
    • Low Power DDR4 on PS
      • Data width: 32bit
      • Size: def. 2GB*
      • Speed:***
    • eMMC
      • Data width: 8Bit
      • size: def. 8GB *
    • QSPI boot Flash in dual parallel mode (size depends on assembly version)
      • Data width: 8bit
      • size: def. 128MB *
    • HyperRAM/Flash (optional, default not assembled)
      • size:*
    • MAC address serial EEPROM with EUI-48™ node identity (Microchip 24AA025E48)
  • On Board
    • Lattice LCMXO2
    • PLL SI5338
    • Gigabit Ethernet transceiver PHY (Marvell Alaska 88E1512)
    • Hi-speed USB2 ULPI transceiver with full OTG support (Microchip USB3320C)
  • Interface
    • 132 x HP PL I/Os (3 banks)
    • ETH
    • USB
    • 4 GTR (for USB3, Sata, PCIe, DP)
    • MIO for UART
    • MIO for SD
    • MIO for PJTAG
    • JTAG
    • Ctrl
  • Power
    • 3.3V-5V Main Input
    • 3.3V Controller Input
    • Variable Bank IO Power Input
  • Dimension
    • 4 cm x 5 cm
  • Notes
    • * depends on assembly version
    • ** also non low power assembly options possible
    • *** depends on used U+ Zynq and DDR4 combination


Key Features'  must be split into 6 main groups for carrier:

  • Modules
    • TE0808, TE807, TE0803,...
  • RAM/Storage
    • E.g. SDRAM, SPI
  • On Board
    • E.g. CPLD, PLL
  • Interface
    • E.g. ETH, USB, B2B, Display port
  • Power
    • E.g. Input supply voltage
  • Dimension



Excerpt
  • Modules: 
    • TE0835
  • RAM/Storage
    • 4Kb EEPROM
  • On Board
    • Programmable Clock Generator
    • I2C Switch IC

...

    • 6x User Green LEDs
    • 16x RF Transformation
    • Reset Push Button
    • Temperature Sensor
    • FT2232H FTDI
    • SDIO Port Expander
    • 2x DIP Switch
    • Pin Headers
    • PCIe 6 Connector
  • Interface

    ...

      • 21x UMCC Connectors
      • 6x SMA Connectors
      • 2x Micro USB2.0
      • RJ45 LAN Socket
      • Micro SD Card Socket
      • 2x UEC5 Connectors
      • 2x UCC8 Connectors
      • PCIe x8 Card
      • 2x Samtec Razor Beam SS5 (2x80 pol) Board to Board Connectors
    • Power
      • 12V Input Supply Voltage
    • Dimension
      • 106.6  x 167.6 mm

    Block Diagram

    Page properties
    hiddentrue
    idComments

    add drawIO object here.

    Note

    For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .



    Scroll Title
    anchorFigure_OV_BD
    titleTEB0835 block diagram


    Scroll Ignore
    draw.io Diagram
    borderfalse
    viewerToolbartrue
    fitWindowfalse
    diagramDisplayName
    lboxtrue
    revision

    ...

    16
    diagramNameTEB0835_OV_BD
    simpleViewerfalse
    width639
    linksauto
    tbstylehidden
    diagramWidth641


    Scroll Only

    Image Modified


    Main Components

    Page properties
    hiddentrue
    idComments

    Notes :

    • Picture of the PCB (top and bottom side) with labels of important components
    • Add List below


    Note

    For more information regarding how to add board photoes, Please refer to "Diagram Drawing Guidline" .



    Scroll Title
    anchorFigure_OV_MC
    titleTEB0835 main components


    Scroll Ignore
    draw.io Diagram
    borderfalse
    viewerToolbartrue
    fitWindowfalse
    diagramDisplayName
    lboxtrue
    revision

    ...

    15
    diagramNameTEB0835_OV_MC
    simpleViewerfalse
    width639
    linksauto
    tbstylehidden
    diagramWidth

    ...

    642


    Scroll Only

    Image Modified


    1. SMA Connectors, J1,J3,J5,J7,J9,J11

    ...

    1. UMCC

    ...

    1. Connectors, J2,J4,J6,J8, J10, J12...16, J20, J27, J32...J38, J42...43
    2. Green LEDs, D6...11
    3. B2B Connector, J18
    4. B2B Connector, J17
    5. Micro SD Card Connector, J28
    6. Reset Push Button,

    ...

    1. BTN1
    2. PCIe 6 Pin Connector, J19
    3. Micro USB2.0 Connectors,

    ...

    1. J30
    2. Gigabit RJ45 Connector, J31
    3. DIP Switch, S1
    4. UEC5 Connector, J22,J24
    5. UCC8 Connector, J23,J25

    ...

    1. 1x4 Pin Header, J21
    2. FTDI, U12
    3. Green LEDs, D1...3

    ...

    1. 1x6 Pin Header,

    ...

    1. J40
    2. Micro USB2.0 Connectors (FTDI), J29
    3. PCIe-8x-kurz

    ...

    1. Card, J26

    Initial Delivery State

    ...

    1. Battery  Holder, B1
    2. DIP Switch (PLL SEL), S2
    3. Pin Header (PLL I2C), J41
    4. Jumper (PWR CFG), J39 
    5. EEPROM, U15
    6. RF Transformer, T2...17, T26...32
    7. Programmable Clock Generator, U5

    Initial Delivery State

    Page properties
    hidden
    true
    idComments

    Notes :

    Only components like EEPROM, QSPI flash can be initialized by default at manufacture.

    If there is no components which might have initial data ( possible on carrier) you must keep the table empty


    Scroll Title
    anchorTable_OV_IDS
    titleInitial delivery state of programmable devices on the module

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    Storage device name

    Content

    Notes

    EEPROMProgrammedFTDI Configuration


    Configuration Signals

    Page properties
    hiddentrue
    idComments
    • Overview of Boot Mode, Reset, Enables.

    ...

    Push Button BTN1 is provided to switch OFF all power supplies on RFSoC board.

    Scroll Title
    anchorTable_OV_

    ...

    RST
    title

    ...

    Reset process.

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    Signal

    ...

    ...

    B2BI/ONote

    RESETN

    J17- 36InputConnected to Push Button, BTN1


    There is a DIP switch S1 provided for enabling CPLD and set the FPGA boot mode. The DIP Switch setting should be set like the following table.

    ...

    ---

    ...

    Scroll Title
    anchorTable_OV_

    ...

    DIP
    title

    ...

    CPLD Configuration

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DIP

    Signal

    ...

    Setting

    ...

    Note

    ...

    RESETN

    S1-

    ...

    Signals, Interfaces and Pins

    Page properties
    hiddentrue
    idComments

    Notes :

    • For carrier or stand-alone boards use subsection for every connector type (add designator on description, not on the subsection title), for example:
      • SD
      • USB
      • ETH
      • FMC
      • ...
    • For modules which needs carrier use only classes and refer to B2B connector if more than one is used, for example
      • JTAG
      • UART
      • I2C
      • MGT
      • ...

    Board to Board (B2B) I/Os

    FPGA bank number and number of I/O signals connected to the B2B connector:

    A

    ...

    CPLD_IO0

    FPGA boot configBit 0, CPLD Firmware dependent.
    S1-BCPLD_IO1FPGA boot configSDA pin
    S1-CCPLD_IO2-PROGRAMN pin
    S1-DCPLD_JTAGENCPLD JTAG ENJTAGENB


    Boot Mode must be set using DIP Switch S1 on CPLD provided on the module TE0835. Please note that the DIP Switch is active low.

    Scroll Title
    anchorTable_

    ...

    OV_

    ...

    BP
    title

    ...

    Gigabit Ethernet

    Boot process.

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    MODE Signal State

    Boot Mode
    S1-AS1-B
    JTAGONON
    QSPI FlashONOFF
    SD CardOFFOFF


    Signals, Interfaces and Pins

    Page properties
    hiddentrue
    idComments

    Notes :

    • For carrier or stand-alone boards use subsection for every connector type (add designator on description, not on the subsection title), for example:
      • SD
      • USB
      • ETH
      • FMC
      • ...
    • For modules which needs carrier use only classes and refer to B2B connector if more than one is used, for example
      • JTAG
      • UART
      • I2C
      • MGT
      • ...

    Board to Board (B2B) I/Os

    Number of I/O signals and interfaces connected to the B2B connectors:

    Scroll Title
    anchorTable_SIP_

    ...

    B2B
    title

    ...

    B2B connections information

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    B2B ConnectorInterfaceI/O Signal CountConnected to

    ...

    Notes
    J17



    I2C3x Single EndedI2C Switch, U7

    PLL Intrupt

    PLL Clocks

    1x Single Ended

    4x Single Ended, 2x Differential pairs

    PLL Clock Generator, U5
    JTAG4x Single EndedFTDI, U12

    CPLD IO

    CPLD Enable

    3x Single Ended

    1x Single Ended

    DIP Switch, S1
    PCIe Reset1x Single EndedPCIe Card, J26
    UART2x Single EndedFTDI, U12

    Ethernet LED

    Ethernet MDI

    2x Single Ended

    8x Single Ended

    RJ45  Connector, J31
    SD Card6x Single Ended

    Micro SD Memory Connector, J28

    IO Expander,  U11


    I/O16x Single Ended, 8x Differential pairsPCIe Card, J26PCIe
    I/O16x Single Ended, 8x Differential pairsUEC5 Connector, J22UEC5
    I/O16x Single Ended, 8x Differential pairsUEC5 Connector, J24UEC5
    Micro USB2.0

    2x Single Ended

    1x Single Ended

    2x Single Ended

    Micro USB2.0 Connector, J30

    Voltage Regulator, U17

    Diode, D5


    J18ADC16x Single Ended, 8x Differential pairs

    SMA, J1, J3, J5, J7 

    UMCC, J2, J4, J6, J8


    ADC Clock4x Single Ended, 2x Differential pairsUMCC, J27, J32
    DAC

    16x Single Ended, 8x Differential pairs


    SMA, J9, J11

    UMCC, J10, J12, J13...16


    DAC Clock4x Single Ended, 2x Differential pairsUMCC, J33, J34
    Green LEDs6x Single Ended, 3x Differential pairsGreen LEDs, D6...11
    I/O

    10x Single Ended

    UCC8 Connector, J23, J25UCC8


    Gigabit Ethernet

    Scroll Title
    anchorTable_SIP_ETH
    titleGigabit Ethernet information

    scroll

    Micro USB for JTAG/UART

    The TEB0835 is equipped with two Micro USB2.0 Connectors J29, J30. 

    ...

    anchorTable_SIP_MUSB2
    titleMicro USB2 to JTAG/UART connections

    ...

    Micro USB2.0

    There is a Micro USB2.0 port provided for user.

    ...

    anchorTable_SIP_MicroUSB2
    titleMicro USB2.0 Socket connections

    ...

    SMA Connectors

    There are 6 SMA Connectors provided for Analog and Digital signals.

    ...

    anchorTable_SIP_SMA
    titleSMA Connectors information

    ...

    -tablelayout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    Signal NameConnected toSignal DescriptionNote

    ...

    PHY_MDI0...3B2B,

    ...

    J17

    ...

    Media Data

    ...


    PHY_LED0...1B2B,

    ...

    UMCC Connectors

    ...

    J17Speed/Link Indicators LEDYellow/Green 


    Micro USB for JTAG/UART

    The TEB0835 is equipped with two Micro USB2.0 Connectors J29, J30. The Micro USB2.0 port, J29 is provided for JTAG/UART and it is connected to FTDI, U12.

    Scroll Title
    anchorTable_SIP_

    ...

    MUSB2
    title

    ...

    Micro USB2 to JTAG/UART connections

    scroll

    ...

    -tablelayout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DesignatorSignal NameConnected toNote

    ...

    UCE5 Connectors

    The TEB0835 is equipped with two UCE5 Connectors.

    ...

    anchorTable_SIP_UEC5
    titleUEC5 Connectors
    J29D_N/D_PFTDI,U12Data
    USB_VBUSDiode, D4VBUS


    Micro USB2.0

    There is a Micro USB2.0 J30, provided for user.

    Scroll Title
    anchorTable_SIP_MicroUSB2
    titleMicro USB2.0 Socket connections

    Scroll Table Layout
    orientationportrait
    sortDirection

    ASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DesignatorSignal NameConnected toNote

    ...

    J30

    USB_N/USB_P

    ...

    B2B, J17

    ...

    Data
    USB0_VBUS

    ...

    B2B, J17

    ...

    VBUS
    USB0_ID

    ...

    B2B, J17

    ...

    ID


    Micro SD Card Reader

    There is a Micro SD Card socket J28 connected to B2B J17 through an I/O expander U11.

    scroll

    UCC8 Connectors

    The TEB0835 is equipped with two UCC8 Connectors.

    ...

    -title
    anchorTable_SIP_

    ...

    MicroSD
    title

    ...

    Micro SD Card Socket connections

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    PinSignal NameConnected toNote

    ...

    VDD

    ...

    3.3V_

    ...

    SDB2B, J17

    ...

    connected to IO expander
    CMDSD_CMD

    ...

    B2B, J17

    ...

    connected to IO expander
    CLKSD_CLK

    ...

    B2B, J17

    ...

    connected to IO expander
    DATA0...3SD_DATA0...3

    ...

    B2B, J17

    ...

    connected to IO expander
    CDSD_CD

    ...

    B2B, J17

    ...

    PCIe Card

    ...



    SMA Connectors

    There are 6 SMA Connectors provided for Analog and Digital signals.

    Scroll Title
    anchorTable_SIP_

    ...

    SMA
    title

    ...

    SMA Connectors information

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DesignatorSignal NameConnected toNote
    J1

    ...

    ADC0_INB2B,

    ...

    Test Points

    ...

    hiddentrue
    idComments

    you must fill the table below with group of Test Point which are indicated as TP in a schematic. If there is no Test Point remarked in the schematic, delet the Test Point section.

    Example:

    ...

    J18Via RF Transformer T2
    J3ADC2_INB2B, J18Via RF Transformer T6
    J5ADC4_INB2B, J18Via RF Transformer T4
    J7ADC6_INB2B, J18Via RF Transformer T8
    J9DAC0_OUTB2B, J18Via RF Transformer T10
    J11DAC2_OUTB2B, J18Via RF Transformer T12


    UMCC Connectors

    There are 21x UMCC Connectors provided for Analog /Digital signals and Clocks input and output.

    Scroll Title
    anchorTable_SIP_

    ...

    UMCC
    title

    ...

    UMCC Connectors

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    DesignatorSignal NameConnected to

    ...

    Note

    ...

    J2

    ...

    ADC1_INB2B,

    ...

    J18Via RF Transformer T3
    J4ADC3_IN

    ...

    B2B, J18

    ...

    Via RF Transformer T5
    J6ADC5_IN

    ...

    B2B, J18

    ...

    Via RF Transformer T7
    J8ADC7_INB2B, J18Via RF Transformer T9
    J10DAC1_OUTB2B, J18Via RF Transformer T11
    J12DAC3_OUT

    ...

    B2B, J18

    ...

    Via RF Transformer T13
    J13DAC4_OUT

    ...

    B2B, J18

    ...

    Via RF Transformer T14
    J14DAC5_OUT

    ...

    B2B, J18

    ...

    Via RF Transformer T15
    J15DAC6_OUT

    ...

    B2B, J18Via RF Transformer T16

    ...

    J16

    ...

    DAC7_

    ...

    OUTB2B, J18Via RF Transformer T17

    ...

    J27

    ...

    ADC_CLK_

    ...

    224B2B, J18

    On-board Peripherals

    Page properties
    hiddentrue
    idComments

    Notes :

    • add subsection for every component which is important for design, for example:
      • Two 100 Mbit Ethernet Transciever PHY
      • USB PHY
      • Programmable Clock Generator
      • Oscillators
      • eMMCs
      • RTC
      • FTDI
      • ...
      • DIP-Switches
      • Buttons
      • LEDs
    Page properties
    hiddentrue
    idComments

    Notes :

    In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection

    ...

    anchorTable_OBP
    titleOn board peripherals

    ...

    Via RF Transformer T26
    J20ADC_CLK_225B2B, J18Via RF Transformer T27
    J32ADC_CLK_226B2B, J18Via RF Transformer T28
    J33ADC_CLK_227B2B, J18Via RF Transformer T29
    J34DAC_CLK_228B2B, J18Via RF Transformer T30
    J35DAC_CLK_229B2B, J18Via RF Transformer T31
    J36CLKIN1Programmable Clock Generator, U5
    J37CLKIN2Programmable Clock Generator, U5
    J38CLKOUT7Programmable Clock Generator, U5Via RF Transformer T32
    J42CLKOUT8Programmable Clock Generator, U5
    J43CLKOUT9Programmable Clock Generator, U5


    UCE5 Connectors

    The TEB0835 is equipped with two UCE5 Connectors.

    Scroll Title
    anchorTable_

    ...

    SIP_

    ...

    UEC5
    title

    ...

    UEC5 Connectors

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    Designator

    ...

    Signal NameConnected to

    ...

    Note

    ...

    J22B128_TX0...3B2B, J178x Single Ended/ 4x LVDS Pairs
    B128_RX0...3B2B, J178x Single Ended/ 4x LVDS Pairs
    J24B129_TX0...3B2B, J178x Single Ended/ 4x LVDS Pairs
    B129_RX0...3B2B, J178x Single Ended/ 4x LVDS Pairs


    UCC8 Connectors

    The TEB0835 is equipped with two UCC8 Connectors.

    ...

    Scroll Title
    anchorTable_

    ...

    SIP_

    ...

    UCC8
    title

    ...

    UCC8 Connectors

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    Designator

    ...

    Signal Name

    ...

    Connected to

    ...

    Note

    ...

    J23

    FTDI

    The FTDI chip U12 converts signals from USB2 to a variety of standard serial and parallel interfaces. Refer to the FTDI data sheet to get information about the capacity of the FT2232H chip. FTDI FT2232H chip is used in MPPSE mode for JTAG, 2 I/O's of Channel B are routed to B2B J17 and must be used as UART.

    The configuration of FTDI FT2232H chip is pre-programmed on the EEPROM U9.

    ...

    anchorTable_OBP_FTDI
    titleFTDI chip interfaces and pins

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    B2B, J17

    ...

    FFA_MPRSB2B, J17
    FFA_MSELB2B, J17
    FFA_INTLB2B, J17
    FFA_RSTLB2B, J17
    FFA_SCL/FFA_SDAI2C Switch, U7
    J25FFB_MPRSB2B, J17
    FFB_MSELB2B, J17
    FFB_INTLB2B, J17
    FFB_RSTLB2B, J17
    FFB_SCL/FFB_SDAI2C Switch, U7


    PCIe 8x Short

    There is a PICe-8x-Short card provided on the TEB0835 board.

    Scroll Title
    anchorTable_SIP_PCIe
    titlePCIe x8 Kurz Connections

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    Signal NameConnected toNote
    B505_RX0...3B2B, J178x Single Ended/ 4x LVDS Pairs
    B505_TX0...3B2B, J178x Single Ended/ 4x LVDS Pairs
    EXT_CLKIN_PSMGTB2B, J17
    PCIE_RSTB_RB2B, J17Pulled up to 1.8V


    PCIe 6 Pins

    ...

    Scroll Title
    anchorTable_

    ...

    SIP_

    ...

    PCIe1x6
    title

    ...

    PCIe 1x6 Connection

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    Pin

    ...

    Signal NameConnected to

    ...

    Clock Sources

    Note

    ...

    112V_input_A

    Regulator, U2







    2
    3
    4GND

    N.C




    5
    6


    Pin Header 1x4

    Scroll Title
    anchorTable_

    ...

    SIP_

    ...

    PinHeader1x4
    title

    ...

    Pin Header1x4 Connections

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    Pin

    ...

    Signal Name

    ...

    Programmable Clock Generator

    There is a programmable clock generator on-board (U5) provided in order to generate variable clocks for the module. Programming can be done using I2C via PIN header J20.  The I2C Address is 0x70.

    Connected toNote

    ...

    1GNDGND
    2FAN_PWR12V
    3FAN_TACHTepmerature Sensor, U9
    4FAN_PWMTepmerature Sensor, U9


    Pin Header 1x6

    There is a 1x6 Pin Header J40, connected to JTAG signals as the following.

    Scroll Title
    anchorTable_

    ...

    SIP_

    ...

    PinHeader1x6
    title

    ...

    Pin Header1x6 Connections

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    PinSignal NameConnected to

    ...

    Note

    ...

    1

    ...

    JTAG_

    ...

    TMS

    ...

    B2B,

    ...

    J17

    ...

    FTDI, U12

    ...


    2

    ...

    JTAG_

    ...

    TDI

    B2B, J17

    ...

    FTDI, U12

    ...


    3

    ...

    JTAG_

    ...

    TDO

    B2B, J17

    ...

    Power and Power-On Sequence

    ...

    hiddentrue
    idComments

    In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

    • Power on-sequence
    • Power distribution
    • Voltage monitoring circuit
    Note

    For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

    FTDI, U12


    4JTAG_TCK

    B2B, J17

    FTDI, U12


    5GND-
    63.3V_MODULEB2B, J17


    Pin Header 1x3

    There is a 1x3 Pin Header J41, it provides access to I2C signals which are connected to I2C Switch, U7.

    Scroll Title
    anchorTable_SIP_PinHeder1x3
    titlePin Header 1x3 Connectors

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    PinSignal NameConnected toNote
    1DSPLL0_SCL

    I2C Switch, U7


    2GND

    I2C Switch, U7


    3DSPLL0_SCL

    I2C Switch, U7



    Jumper

    There is a Jumper J39 provided for setting the DCDC_EN between two signal level as the following. 

    Scroll Title
    anchorTable_SIP_Jumper
    titleJumper Connections

    Power Supply

    Power supply with minimum current capability of 3 A for system startup is recommended.

    Power Consumption

    ...

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    Pin

    ...

    Signal NameConnected toNote
    1PG_5VRegulator, U8
    2DCDC_ENRegulator, U1, U4
    3MODULE_PGB2B, J17


    I2C Addresses

    * TBD - To Be Determined

    ...

    Scroll Title
    anchor

    ...

    Table_OBP_

    ...

    I2C_

    ...

    ADD
    title

    ...

    I2C addresses table

    scroll-

    ...

    tablelayout

    ...

    orientation

    ...

    portrait

    ...

    sortDirection

    ...

    ASC

    ...

    repeatTableHeaders

    ...

    default

    ...

    style

    ...

    widths

    ...

    sortByColumn

    ...

    1

    ...

    sortEnabled

    ...

    false

    ...

    Scroll Only

    Image Removed

    Power-On Sequence

    ...

    anchorFigure_PWR_PS
    titlePower Sequency

    cellHighlightingtrue

    DesignatorI2C AddressNotes
    U90x4CTemperature Sensor IC
    U70x70I2C Switch
    U50x68Programmable Clock Generator


    Test Points

    Page properties
    hiddentrue
    idComments

    you must fill the table below with group of Test Point which are indicated as TP in a schematic. If there is no Test Point remarked in the schematic, delet the Test Point section.

    Example:

    Test PointSignalB2BNotes
    10PWR_PL_OKJ2-120



    scroll

    ...

    Scroll Only

    image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

    Power Rails

    ...

    -title
    anchorTable_

    ...

    SIP_

    ...

    TPs
    title

    ...

    Test Points Information

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    B2B  JM17

    ...

    B2B JM2

    ...

    Board to Board Connectors

    ...

    hiddentrue
    idComments

    ...

    Test PointSignalConnected toNotes
    TP15VB2B, J17
    TP2...3GNDGND
    TP4ADC0_VCMB2B, J18
    TP5ADC1_VCMB2B, J18
    TP6USB_VBUSMicro USB2.0, J29
    TP7UART0_RXB2B, J17
    TP8UART0_TXB2B, J17
    TP9ADC2_VCMB2B, J18
    TP10ADC3_VCMB2B, J18
    TP11ADC4_VCMB2B, J18
    TP12ADC5_VCMB2B, J18
    TP13ADC6_VCMB2B, J18
    TP14ADC7_VCMB2B, J18
    TP15PSBATTDiode, D13
    TP16CLKE_P-
    TP17CLKE_N-
    TP18CLKF_P-
    TP19CLKF_N-
    TP20CLKD_P-
    TP21CLKD_N-


    On-board Peripherals

    Page properties
    hiddentrue
    idComments

    Notes :

    • add subsection for every component which is important for design, for example:
      • Two 100 Mbit Ethernet Transciever PHY
      • USB PHY
      • Programmable Clock Generator
      • Oscillators
      • eMMCs
      • RTC
      • FTDI
      • ...
      • DIP-Switches
      • Buttons
      • LEDs


    Page properties
    hiddentrue
    idComments

    Notes :

    In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection

    use "include page" macro and link to the general B2B connector page of the module series,

    ...

    Technical Specifications

    Absolute Maximum Ratings

    ...

    anchorTable_TS_AMR
    titlePS absolute maximum ratings

    ...

    Recommended Operating Conditions

    ...


    Scroll Title
    anchorTable_

    ...

    OBP
    title

    ...

    On board peripherals

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ...

    Chip/Interface

    ...

    Designator

    ...

    Notes

    ...

    Physical Dimensions

    • Module size: 106.6 mm × 167.7 mm.  Please download the assembly diagram for exact numbers.

    • Mating height with standard connectors: 5 mm.

    PCB thickness: 1.5 mm.

    ...

    hiddentrue
    idComments

    In 'Physical Dimension' section, top and bottom view of module must be inserted, information regarding physical dimensions can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part) for every SoM.

    For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

    https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

    Note

    For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

    ...

    anchorFigure_TS_PD
    titlePhysical Dimension

    ...

    Scroll Only
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue

    Image Removed

    Currently Offered Variants 

    ...

    hiddentrue
    idComments

    Set correct link to the shop page overview table of the product on English and German.



    EEPROM

    There is an EEPROM U15 provided in order to store the FTDI configuration.

    Scroll Title
    anchorTable_OBP_EEP
    titleEEPROM information

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    PinSchematicConnected toNotes
    CSEECSFTDI, U12
    CLKEECLKFTDI, U12
    DINEEDATAFTDI, U12


    DIP Switch

    There are two DIP Switches S1, S2 provided for boot mode and manual input select of programmable clock generator. For more information please refer to Configuration Signal Section

    Scroll Title
    anchorTable_OBP_DIP
    titleDIP Switches information

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DesignatorPinSchematicConnected toNotes
    S1S1ACPLD_IO0B2B, J17
    S1BCPLD_IO1B2B, J17
    S1CCPLD_IO2B2B, J17
    S1DCPLD_JTAGENB2B, J17
    S2S2ADSPLL0_SEL0Programmable clock Generator, U5
    S2BDSPLL0_SEL0Programmable clock Generator, U5


    Temperature Sensor

    There is a temperature sensor IC U9 provided to capture the temperature and provides an alert when cooling is needed. the temperature IC is connected to I2C bus at address 0x4C.

    Scroll Title
    anchorTable_OBP_Temp
    titleTemperature sensor information

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    PinSchematicConnected toNotes
    TACHFAN_TACHPin Header, J21
    PWMFAN_PWMPin Header, J21
    D+DX_PRegulator, U8
    D-DX_NRegulator, U8
    nALERTALERT_N

    I2C Switch, U7


    nTCRITTHERM_Npulled up to 3.3V
    SMBCLKI2C_SCL_SNSI2C Switch, U7
    SMBDATI2C_SDA_SNSI2C Switch, U7


    FTDI

    The FTDI chip U12 converts signals from USB2 to a variety of standard serial and parallel interfaces. Refer to the FTDI data sheet to get information about the capacity of the FT2232H chip. FTDI FT2232H chip is used in MPPSE mode for JTAG, 2 I/O's of Channel B are routed to B2B J17 and must be used as UART.

    The configuration of FTDI FT2232H chip is pre-programmed on the EEPROM U15.

    Scroll Title
    anchorTable_OBP_FTDI
    titleFTDI chip interfaces and pins

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    FTDI PinSignal Schematic NameConnected toNotes
    ADBUS0JTAG_TCK

    B2B, J17

    Pin Header, J40

    JTAG interface
    ADBUS1JTAG_TDI

    B2B, J17

    Pin Header, J40

    ADBUS2JTAG_TDO

    B2B, J17

    Pin Header, J40

    ADBUS3JTAG_TMS

    B2B, J17

    Pin Header, J40

    BDBUS0UART0_RXB2B, J17UART
    BDBUS1UART0_TXB2B, J17UART
    EECS/EECLK/EEDATABDBUS2EEPROM, U15FTDI configuration
    DM/DPD_N/D_PMicro USB2.0, J29FTDI Input


    Push Button

    Scroll Title
    anchorTable_OBP_BTN
    titlePush Button information

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DesignatorConnected toFunctionalityNote
    BTN1RESETNGeneral Reset


    LEDs

    Scroll Title
    anchorTable_OBP_LED
    titleOn-board LEDs

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DesignatorColorConnected toActive LevelNote
    D1GreenPG_1.8VHigh
    D2GreenPG_3.3VHigh
    D3GreenPG_5VHigh
    D6...11GreenB2B, J18HighUser LED
    D12GreenClock Generator, U5High


    Clock Sources

    Scroll Title
    anchorTable_OBP_CLK
    titleOsillators

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DesignatorDescriptionFrequencyNote
    U6MEMS Oscillator100 MHz
    U16MEMS Oscillator12 MHz
    Y1Crystal Oscillator54 MHz
    U5Programmable Clock GeneratorVariable


    Programmable Clock Generator

    There is a programmable clock generator on-board (U5) provided in order to generate variable clocks for the module. The I2C Address is 0x68.

    Scroll Title
    anchorTable_OBP_PCLK
    titleProgrammable Clock Generator Inputs and Outputs

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    U5 Pin
    SignalConnected toDirectionNote
    IN0CLKIN0Oscillator, U6Input
    IN1CLKIN1UMCC Connector, J36Input
    IN2CLKIN2UMCC Connector, J37Input
    IN3FBProgrammable Clock Generator, U5Input/Output
    XA/XBCLK0_XA/XBOscillator, Y1Input
    IN_SEL0...1DSPLL0_SEL0...1

    I2C Switch, U7

    DIP Switch, S2

    Input
    nINTRDSPLL0_INTR_NI2C Switch, U7Input
    nLOLDSPLL0_LOL_NGreen LED, D12Input
    nRSTDSPLL0_RST_N1.8 VInput
    SCLKDSPLL0_SCLI2C Switch, U7Input
    SDA/SDIODSPLL0_SDA

    I2C Switch, U7

    Pin Header, J41

    In/Out
    INTRPLL_INTR_NB2B, J17Output
    OUT0ACLKOUT0AB2B, J17Output
    OUT0CLKOUT0_PB2B, J17Output
    OUT1PLLCLK1UMMC, J27Output
    OUT2PLLCLK2UMMC, J20Output
    OUT3PLLCLK3UMMC, J32Output
    OUT4PLLCLK4UMMC, J33Output
    OUT5PLLCLK5UMMC, J34Output
    OUT6PLLCLK6UMMC, J35Output
    OUT7CLKOUT7UMMC, J38Output
    OUT8CLKOUT8UMMC, J42Output
    OUT9CLKOUT9UMMC, J43Output
    OUT9ACLKOUT9AProgrammable Clock Generator, U5Output


    Power and Power-On Sequence

    Page properties
    hiddentrue
    idComments

    In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

    • Power on-sequence
    • Power distribution
    • Voltage monitoring circuit


    Note

    For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .


    Power Supply

    Power supply with minimum current capability of 3 A for system startup is recommended.

    Power Consumption

    Scroll Title
    anchorTable_PWR_PC
    titlePower Consumption

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    Power Input PinTypical Current
    VINTBD*


    * TBD - To Be Determined

    Power Distribution Dependencies

    Scroll Title
    anchorFigure_PWR_PD
    titlePower Distribution


    Scroll Ignore
    draw.io Diagram
    borderfalse
    viewerToolbartrue
    fitWindowfalse
    diagramDisplayName
    lboxtrue
    revision13
    diagramNameTEB0835_PWR_PD
    simpleViewerfalse
    width639
    linksauto
    tbstylehidden
    diagramWidth640


    Scroll Only

    Image Added


    Power-On Sequence

    Scroll Title
    anchorFigure_PWR_PS
    titlePower Sequency


    Scroll Ignore


    draw.io Diagram
    borderfalse
    diagramNameTEB0835_PWR_PS
    simpleViewerfalse
    width639
    linksauto
    tbstylehidden
    diagramDisplayName
    lboxtrue
    diagramWidth640
    revision2


    Scroll Only

    Image Added


    Power Rails

    Scroll Title
    anchorTable_PWR_PR
    titleModule power rails.

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue


    Power Rail Name

    B2B  JM17

    B2B JM2

    DirectionNotes
    5V1,2,3,4,5,6,8-Ouput
    PSBATT14-Output
    3.3V_MODULE16-Input


    Board to Board Connectors

    Page properties
    hiddentrue
    idComments
    • This section is optional and only for modules.
    • use "include page" macro and link to the general B2B connector page of the module series,

      For example: 6 x 6 SoM LSHM B2B Connectors

      Include Page
      6 x 6 SoM LSHM B2B Connectors
      6 x 6 SoM LSHM B2B Connectors

    Include Page
    6.5 x 9 SoM SS5/ST5 B2B Connectors
    6.5 x 9 SoM SS5/ST5 B2B Connectors

    Technical Specifications

    Absolute Maximum Ratings

    Scroll Title
    anchorTable_TS_AMR
    titlePS absolute maximum ratings

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    SymbolsDescriptionMinMaxUnit
    VINInput Supply Voltage2.534V
    ADC_VAnalog input voltage-5.05.0V
    DAC_VDigital input voltage-5.05.0°C
    T_STGStorage Temperature-55125°C


    Recommended Operating Conditions

    Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

    Scroll Title
    anchorTable_TS_ROC
    titleRecommended operating conditions.

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    ParameterMinMaxUnitsReference Document
    VIN1113VSee the datasheet.
    ADC_V05VSee the SMA datasheet
    DAC_V05VSee the UMCC datasheet
    T_OPT-40+85°CSee RF Transformer datasheet.


    Physical Dimensions

    • Module size: 106.6 mm × 167.7 mm.  Please download the assembly diagram for exact numbers.

    • Mating height with standard connectors: 5 mm.

    PCB thickness: 1.5 mm.

    Page properties
    hiddentrue
    idComments

    In 'Physical Dimension' section, top and bottom view of module must be inserted, information regarding physical dimensions can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part) for every SoM.

    For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

    https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

    Note

    For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .



    Scroll Title
    anchorFigure_TS_PD
    titlePhysical Dimension


    Scroll Ignore
    draw.io Diagram
    borderfalse
    viewerToolbartrue
    fitWindowfalse
    diagramDisplayName
    lboxtrue
    revision2
    diagramNameTEB0835_TS_PD
    simpleViewerfalse
    width639
    linksauto
    tbstylehidden
    diagramWidth641


    Scroll Only
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue

    Image Added


    Currently Offered Variants 

    Page properties
    hiddentrue
    idComments

    Set correct link to the shop page overview table of the product on English and German.

    Example for TE0728:

        ENG Page: https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

        DEU Page: https://shop.trenz-electronic.de/de/Produkte/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

    For Baseboards or modules, where no overview page is available (and revision number is coded in the direct link) use shop search link, e.g. TE0706:

        ENG Page: https://shop.trenz-electronic.de/en/search?sSearch=TE0706

       DEU Page: https://shop.trenz-electronic.de/de/search?sSearch=TE0706


    Scroll Title
    anchorTable_VCP_SO
    titleTrenz Electronic Shop Overview

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    Trenz shop TEB0835 overview page
    English pageGerman page


    Revision History

    Hardware Revision History

    Page properties
    hiddentrue
    idComments

    Set correct links to download  arrier, e.g. TE0706 REV02:

      TE0706-02  ->   https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/4x5_Carriers/TE0706/REV02/

    ...

    Documents

    Note:

    • Date format:  YYYY-MM-DD


    Scroll Title
    anchorTable_RH_HRH
    titleHardware Revision History

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DateRevisionChangesDocumentation Link
    2019-11-29REV01Initial ReleaseREV01
    2020-08-13REV02
    1. All module's mount holes are connected to GND;
    2. CLK_Connectors. Added baluns for each clock inputs;
    3. Internal DSPLL is changed on SI5395A-A-GM;
    4. Added ability to use internal DSPLL as a source for each clock;
    5. Added clock inputs CLKIN1, CLKIN2 and clock outputs OUT1 , OUT2 connected to DSPLL.;
    6. All clock traces are matched with tolerance 0.2 mm;
    7. Lengths of inputs ADC0, ADC2, ADC4, ADC6 are matched with tolerance 0.2 mm;
    8. Lengths of outputs DAC0 and DAC2 are matched with tolerance 0.2 mm;
    9. Lengths of outputs DAC4, DAC5, DAC6, DAC7 are matched with tolerance 0.2 mm;
    10. In REV02: FTDI is powered from 3.3V_Module;
    11. Signal PLL_INTR_N is removed;
    12. Signal BOARD_PG is renamed in MODULE_PG;
    13. Added ability to select enable signal for internal DC-DCs 3.3V and 1.8V.
    14. Added JTAG connector J40.
    15. Added VBAT schematic. Added a holder for CR1220 3V battery
    REV02

    ...

    Note:

    • Date format:  YYYY-MM-DD

    ...

    anchorTable_RH_HRH
    titleHardware Revision History

    ...



    Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

    Scroll Title
    anchorFigure_RV_HRN
    titleBoard hardware revision number.


    Scroll Ignore
    draw.io Diagram
    borderfalse
    viewerToolbartrue
    fitWindowfalse
    diagramDisplayName
    lboxtrue
    revision

    ...

    4
    diagramNameTEB0835_RV_HRN
    simpleViewerfalse
    width200
    linksauto
    tbstylehidden
    diagramWidth201


    Scroll Only

    Image Modified



    Document Change History

    Page properties
    hiddentrue
    idComments
    • Note this list must be only updated, if the document is online on public doc!
    • It's semi automatically, so do following
      • Add new row below first

      • Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

      • Metadata is only used of compatibility of older exports


    Scroll Title
    anchorTable_RH_DCH
    titleDocument change history.

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    style
    widths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DateRevisionContributorDescription

    Page info
    infoTypeModified date
    dateFormatyyyy-MM-dd
    typeFlat

    Page info
    infoTypeCurrent version
    prefixv.
    typeFlat
    showVersionsfalse

    Page info
    infoTypeModified by
    typeFlat
    showVersionsfalse

    ...

    • Board to Board Connector Section: Bugfix Include Macro

    2023-08-04

    v.55

    Manuela Strücker 

    • update download link
    2023-01-17v.54Kerstin Möller
    • Style update
    2020-12-21v.51Pedram Babakhani
    • Update to 
      Revision 02

    --

    all

    Page info
    infoTypeModified users
    typeFlat
    showVersionsfalse

    • --


    Disclaimer

    Include Page
    IN:Legal Notices
    IN:Legal Notices



    Custom_fix_page_content


    Scroll pdf ignore

    Table of Contents

    Table of Contents