Versions Compared

Old Version 2

changes.mady.by.user Martin Rohrmüller

Saved on

compared with

New Version 3

changes.mady.by.user Martin Rohrmüller

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Excerpt
  • Vitis/Vivado 2019.2
  • PetaLinux
  • PCIe (endpoint)
  • SATA
  • SD
  • ETH
  • USB
  • I2C
  • RTC
  • FMeter
  • MAC from EEPROM
  • User LED (PCB REV03 only)
  • Modified FSBL for SI5338 programming
  • Special FSBL for QSPI programming

...

Basic description of TE Board Part Files is available on TE Board Part Files.

Complete List is available on <design name>/board_files/*_board_files.csv

...

The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.

...

  1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
  2. Press 0 and enter to start "Module Selection Guide"
  3. (optional Win OS) Generate Virtual Drive or use short directory  for the reference design (for example x:\<design name>)
  4. Create Project (follow instruction of the product selection guide), settings file will be configured automatically during this process
    1. (optional for manual changes) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
      Note: Select correct one, see also TE Board Part Files
  5. Create XSA and export to prebuilt folder
    1. Run on Vivado TCL: TE::hw_build_design -export_prebuilt
      Note: Script generate design and export files into \prebuilt\hardware\<short dir>. Use GUI is the same, except file export to prebuilt folder
  6. Create Linux (bl31.elf, uboot.elf and image.ub) with exported XSA
    1. XSA is exported to "prebuilt\hardware\<short name>"
      Note: HW Export from Vivado GUI create another path as default workspace.
    2. Create Linux images on VM, see PetaLinux KICKstart
      1. Use TE Template from "/os/petalinux"
  7. Add Linux files (bl31.elf, uboot.elf and image.ub) to prebuilt folder
    1. "prebuilt\os\petalinux\<DDR size>" or "prebuilt\os\petalinux\<short name>"
      Notes: Scripts select "prebuilt\os\petalinux\<short name>", if exist, otherwise "prebuilt\os\petalinux\<DDR size"
  8. Generate Programming Files with Vitis
    1. Run on Vivado TCL: TE::sw_run_vitis -all
      Note: Depending of PC performance this can take several minutes. Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv" and open Vitis
    2. (alternative) Start Vitis with Vivado GUI or start with TE Scripts on Vivado TCL: TE::sw_run_vitis
      Note:  TCL scripts generate also platform project, this must be done manuelly in case GUI is used. See Vitis

Launch

Page properties
hiddentrue
idComments

Note:

  • Programming and Startup procedure

...

PCB REV03 Design:

Scroll Title
anchorFigure_VHM
titleVivado Hardware Manager

PCB REV01, REV02 Design:

Scroll Title
anchorFigure_VHM1
titleVivado Hardware Manager PCB REV01,REV02

...

For SDK project creation, follow instructions from:

Vitis

Application

Page properties
hiddentrue
idComments

----------------------------------------------------------

FPGA Example

todo..

----------------------------------------------------------

Zynq Example:

zynq_fsbl

TE modified 2018.3 FSBL

General:

  • Modified Files:main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)

  • Add Files: te_fsbl_hooks.h/.c(for hooks and board)\n\

  • General Changes: 
    • Display FSBL Banner and Device ID

Module Specific:

  • Add Files: all TE Files start with te_*
    • READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot  platform-top.h)
    • CPLD access
    • Read CPLD Firmware and SoC Type
    • Configure Marvell PHY

zynq_fsbl_flash

TE modified 2018.3 FSBL

General:

  • Modified Files: main.c
  • General Changes:
    •  Display FSBL Banner
    • Set FSBL Boot Mode to JTAG
    • Disable Memory initialisation

ZynqMP Example:

----------------------------------------------------------

zynqmp_fsbl

TE modified 2018.3 FSBL

General:

  • Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c(search for 'TE Mod' on source code)
  • Add Files:  te_xfsbl_hooks.h/.c (for hooks and board)\n\
  • General Changes: 
    • Display FSBL Banner and Device Name

Module Specific:

  • Add Files: all TE Files start with te_*
    • Si5338 Configuration
    • ETH+OTG Reset over MIO

zynqmp_fsbl_flash

TE modified 2018.3 FSBL

General:

  • Modified Files: xfsbl_initialisation.c, xfsbl_hw.h, xfsbl_handoff.c, xfsbl_main.c
  • General Changes:
    •  Display FSBL Banner
    • Set FSBL Boot Mode to JTAG
    • Disable Memory initialisation


zynqmp_pmufw

Xilinx default PMU firmware.

----------------------------------------------------------

General Example:

hello_te0820

Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. SDK/HSI is used to generate Boot.bin.

...

Page properties
hiddentrue
idComments
Note:
  • Add description for other Software, for example SI CLK Builder ...
  • SI5338 and SI5345 also Link to:

SI5338

File location <design name>/misc/Si5338/Si5338-*.slabtimeproj

General documentation how you work with these project will be available on Si5338

Appx. A: Change History and Legal Notices

...