- EN: Apply Gapfiller in at least approx. 2 mm thickness:
DE: Gapfiller in mindestens ca. 2mm Dicke auftragen: - EN: Align heat sink and press on lightly:
DE: Kühlkörper ausrichten und leicht anpressen: - EN:
Set the torque screwdriver at the assembly station to 0.5Nm.
Insert the PH1 Philips crosshead bit and fix it crosswise from below with four M3x6mm pan-head screws.
DE:
Den Drehmomentschrauber am Montagepaltz auf 0,5Nm einstellen.
Das PH1 Philips Kreuzschlitzbit einlegen und mit vier M3x6mm Linsenkopfschrauben von unten überkreuz fixieren.
Overview
Content Tools