You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

CompanyTrenz Electronic GmbH
PCN NumberPCN-20230920
TitleTE0818-01 to TE0818-02 Hardware Revision Change
SubjectHardware Revision Change
Issue Date

2023-11-01

Products Affected

This change affects all Trenz Electronic TE0818 SoMs: TE0818-01*.

Affected Product

Changes

Replacement
TE0818-01-6BE21-A#1...#11TE0818-02-6BE81-A
TE0818-01-9BE21-A#1...#11TE0818-02-9BE81-A
TE0818-01-9BE21-AZ#1...#11TE0818-02-9BE81-A
TE0818-01-9GI21-A#1...#11TE0818-02-9GI81-A
TE0818-01-9GI21-AK#1...#11TE0818-02-9GI81-AK
TE0818-01-9GI21-AS#1...#11TE0818-02-9GI81-AS
TE0818-01-BBE21-A#1...#11TE0818-02-BBE81-A
TE0818-01-BBE21-AZ#1...#11TE0818-02-BBE81-A
TE0818-01-BGI21-A#1...#11TE0818-02-BGI81-A
TE0818-01-9GI81-A#1...#11TE0818-02-9GI81-A
TE0818-01-9GI81-AK#2...#11TE0818-02-9GI81-AK
TE0818-01-BBE81-A#2...#11TE0818-02-BBE81-A
TE0818-01-BBE81-AK#2...#11TE0818-02-BBE81-AK


Changes

#1 Changed DDR4 SDRAM (U2, U3, U9, U12) from K4A8G165WB-BIRC to K4A8G165WC-BITDTCV.

Type: BOM change

Reason: BOM Optimization.

Impact: Memory design settings needs to be reviewed by customer.

#2 Added defaultly used external compensation network (R119, C190, C191) and option (R118) to use internal compensation for DCDCs (U18, U37).

Type: Schematic Change

Reason: Improve stability.

Impact: None. Improved stability.

#3 Added capacitors C178, C187, C188, C189 (470nF) to improve VTT net.

Type: Schematic Change

Reason: VTT decoupling improvement.

Impact: Improved VTT voltage rail reliabililty.

#4 Added diode D2 between U41 pin 3 net MR and voltage rail 3.3VIN.

Type: Schematic Change

Reason: Protect manual reset pin.

Impact: None.

#5 Enabled DDR4 test usage via connecting all DDR4 TEN pins together, pulled them down with resistor R120 and added testpoint TP23.

Type: Schematic Change

Reason: Enable DDR4 test improvement.

Impact: None.

#6 Added testpoints TP25, TP27, TP29, TP35, TP37...TP79.

Type: Schematic Change

Reason: Improve voltage measuring possibilities.

Impact: None.

#7 Changed capacitor C112 size from 0402 to 0201 and voltage rating from 16 V to 10 V.

Type: Schematic Change

Reason: BOM Optimization.

Impact: None.

#8 Changed ferrid beads from MPZ0603S121HT000 to BLM15PX800SZ1D for L1, L2, L3, L4, L5, and L7.

Type: Schematic Change

Reason: BOM Optimization.

Impact: None.

#9 Changed ferrid beads from MPZ1608S221A to BLM15PX800SZ1D for L6 and L8.

Type: Schematic Change

Reason: BOM Optimization.

Impact: None.

#10 Modified trace length.

Type: PCB Change

Reason: Changing trace length are the result of above done changes.

Impact: Check whether new trace length fits your baseboard requirements.

#11 Updated documentation overviews.

Type: Documentation Update

Reason: Documentation improvement.

Impact: None.

Method of Identification

The revision number is printed on the top side of the PCB.


Production Shipment Schedule

This change takes place with immediate effect. If the new revision is not suitable for your application and still the former revision of the board is needed, please contact us.


Contact Information

If you have any questions related to this PCN, please contact Trenz Electronics Technical Support at

Disclaimer

Any projected dates in this PCN are based on the most current product information at the time this PCN is being issued, but they may change due to unforeseen circumstances.  For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.

This PCN follows JEDEC Standard J-STD-046.

  • No labels