Single 5V power supply with minimum current capability of 1.5A is recommended to power on the board.
DIP-Switches and Push Buttons
There is two switch (S1 and S6) which is connected to RESET signals, these reset the system entirely. The S6 is a soft reset buttom and S1 create a reset signal via hardware.
Signal
Designator
B2B
Active Level
DIP Switches /Push Buttons
There is no DIPs on TEM0007 module.
Jumpers
Designator
Connected to
B2B
Note
Boot_R
Open:
Short:
Jumpers
LEDs
There are three user LEDs which can be used for variant purposes.
Designator
Color
Connected to
B2B
Active Level
Note
Carrier LEDs
Designator
Color
Connected to
Active Level
Note
Module LEDs
Designator
Color
Connected to
Active Level
Note
Carrier LEDs
JTAG/UART
JTAG and UART connections are available through mini USB connector.